电解铝企业阳极残渣、阳极残极浸出毒性鉴别及管理建议

对电解铝企业产生的阳极残渣、阳极残极浸出毒性进行了鉴别。鉴别结果表明：电解铝企业产生阳极残渣浸出液中氟化物（不含氟化钙）平均质量浓度为140 mg／L，最高达244 mg／L，且超标试样数达到《危险废物鉴别标准浸出毒性鉴别》中相应规定，鉴别该废物属于危险废物，应按照危险废物进行管理；阳极残极浸出液中氟化物（不含氟化钙）平均质量浓度为74 mg／L，无超标试样数，该废物不属于具有氟化物浸出毒性的固体废物，建议仍按一般固体废物进行管理。     

几种表面防护体系耐盐雾性能研究

目的通过对比试验室加速腐蚀试验结果,获得耐盐雾腐蚀性能最佳的表面防护体系。方法选用2024铝合金的几种不同表面防护体系,进行盐雾腐蚀试验。通过宏观腐蚀形貌和涂层失光率变化来分析判定表面防护体系耐腐蚀性能,获得抗腐蚀性能优异的表面防护体系。结果综合内外部防护体系宏观腐蚀形貌和失光率情况来看,阿洛丁氧化和所配套的三套涂层系统的盐雾适应性较差。结论内部防护体系推荐采用铬酸阳极化+10P4-X底漆防护体系;外部防护体系推荐采用铬酸阳极化+10P20-X底漆+ECL面漆防护体系。     

超疏水表面在提高镁合金耐蚀性能上的研究进展

总结和讨论了超疏水表面提高镁合金耐蚀性能的制备方法。采用电化学测试方法研究了超疏水表面的抗腐蚀行为。总结了在镁合金上制备抗腐蚀性超疏水表面的最新进展,提出了超疏水表面提高镁合金耐蚀性能的机理。镁合金上制备超疏水表面的方法较多,但是能进行大规模生产的较少,且制备的超疏水表面耐久性、机械稳定性较差。     

Scale-up modeling of the twin roll casting process for AZ31 magnesium alloy

In the present study, a 2-D finite-element method (FEM) thermal-fluid-stress model has been developed and validated for the twin roll casting (TRC) of AZ31 magnesium alloy. The model was then used to quantify how the thermo-mechanical history experienced by the strip during TRC would change as the equipment was scaled up from a laboratory size (roll diameter = 355 mm) to a pilot scale (roll diameter = 600 mm) and to an industrial scale (roll diameter = 1150 mm) machine. The model predictions showed that the thermal history and solidification cooling rate experienced by the strip are not affected significantly by caster scale-up. However, the mechanical history experienced by the strip did change remarkably depending on the roll diameters. Casting with bigger rolls led to the development of higher stress levels at the strip surface. The roll separating force/mm width of strip was also predicted to increase significantly when the TRC was scaled to larger sizes. Using the model predicted results, the effect of both casting speed and roll diameter was integrated into an empirical equation to predict the exit temperature and the roll separating force for AZ31. Using this approach, a TRC process map was generated for AZ31 which included roll diameter and casting speed.     

铝粉表面超声波化学镀Ni-Co合金的研究

目的在铝粉表面进行镀Ni-Co合金层的研究,为制备新型的空心陶瓷吸波材料提供基础原料。方法利用超声波化学镀法。结果铝粉经过超声波化学镀Ni-Co合金,质量增加平均百分率达到了89.0%,通过SEM,EDS和XRD分析,表明在铝粉表面形成了Ni-Co合金层。结论利用超声波化学镀法能够在铝粉表面形成Ni-Co合金层。     

加速腐蚀环境下LD2CS铝合金腐蚀损伤分析方法

目的研究LD2CS铝合金腐蚀损伤数据的分析方法。方法针对LD2CS铝合金腐蚀坑深度值,采用最小二乘支持向量机、BP人工神经网络和求和自回归移动平均等3种模型进行回归和预测分析。对比总结各种模型在小样本递增时间序列下的应用特点。结果对于LD2CS铝合金腐蚀坑深度值预测,最小二乘支持向量机在回归和预测上都有较高的精度。结论最小二乘支持向量机模型最适合LD2CS铝合金的腐蚀坑深度值预测。     

预腐蚀LY12CZ铝合金的疲劳寿命预测模型

目的研究铝合金预腐蚀疲劳的寿命评估模型。方法利用损伤力学模型,建立预腐蚀构件疲劳寿命预测模型,并利用LY12CZ铝合金进行预腐蚀疲劳的验证性实验。结果利用损伤力学建立的模型所得到的预腐蚀铝合金试件的疲劳寿命与实验结果吻合程度良好。结论基于损伤力学的铝合金预腐蚀疲劳寿命预测模型合理有效。     

电解铝生产含氟工业烟气湿法吸收治理中试装置设计实现

本文通过对国内外近几年有关电解铝含氟化氢工业尾气净化处理大量的参考文献的分析研究及国内外电解铝生产企业在尾气治理方面的技术应用和尾气净化装置运行状况的调研,结合自己的专业特长和工程经验,建立一套有关电解铝含氟化氢尾气在处理、净化氟化氢方面的技术方案,设计制作一套湿法氟化氢吸收中试装置,从工艺方案优化设计、安全运行、设备设计及选材、自动控制、建立相关的副产物检测方法和后续产物的综合利用等方面进行了研究和探讨。     

Study of the influence of melamine polyphosphate and aluminum hydroxide on the flame propagation and explosion overpressure of aluminum magnesium alloy dust

When aluminum magnesium alloy dust floats in the air, a certain ignition energy can easily cause an accidental explosion. To prevent and control the occurrence of accidental explosions and reduce the severity of accidents, it is necessary to carry out research on the explosion suppression of aluminum magnesium alloy dust. This paper uses a vertical glass tube experimental device and a 20 L spherical explosive experimental device to carry out experimental studies on the suppression of the flame propagation and explosion overpressure of aluminum magnesium alloy dust with melamine polyphosphate (MPP) and Al(OH)₃. With increasing MPP and Al(OH)₃ concentrations, the flame brightness darkened, the flame velocity and propagation distance gradually decreased, and P_max and (dp/dt)_max decreased significantly. When the amount of MPP added reached 60%, the flame propagation distance decreased to 188 mm, which is a decrease of 68%, and the explosion overpressure decreased to 0.014 MPa, effectively suppressing the explosion of aluminum magnesium alloy dust. The experimental results showed that MPP was more effective than Al(OH)₃ in inhibiting the flame propagation and explosion overpressure of the aluminum magnesium alloy dust. Finally, the inhibitory mechanisms of the MPP and Al(OH)₃ were further investigated. The MPP and Al(OH)₃ endothermic decomposition produced an inert gas, diluted the oxygen concentration and trapped active radicals to terminate the combustion chain reaction.     

赤泥制备含钛聚硅酸铝铁及亚甲基蓝溶液的混凝脱色

以拜耳法赤泥为原料、Na Cl为助溶剂,采用酸浸法溶出赤泥中的铁、铝元素,再与硅酸钠、硫酸氧钛反应制备出高效混凝剂含钛聚硅酸铝铁(T-PSAF),并将其用于模拟亚甲基蓝印染废水的脱色。实验结果表明:在硫酸浓度为8 mol/L、液固比(硫酸体积与干赤泥质量之比)为14 m L/g、酸浸温度为80℃、酸浸时间为80 min、Na Cl加入量为0.10 g/g(以干赤泥计)的优化酸浸条件下,铁、铝的浸出率分别为88.25%和73.21%;在n(Fe+Al)∶n(Ti)∶n(Si)=0.3∶0.3∶1、熟化p H为4~5、熟化时间为2 h、混凝剂加入量为25 m L/L的优化混凝条件下,初始亚甲基蓝质量浓度为10 mg/L的废水的脱色率可达87.1%,而当初始亚甲基蓝质量浓度增至150~200 mg/L时废水脱色率可达99%以上。