Al_2O_3光催化降解染料性能研究

液相加热法制备了Al2O3作为光催化剂,研究了不同光源、光照时间、催化剂用量和溶液酸度等条件对常见有机染料光催化降解性能影响。结果表明,用太阳光作为光源照射3h,50mL染料溶液中加入Al2O3 30mg,溶液pH8～10,孔雀石绿,酚藏花红,甲基紫等染料脱色率达93%以上。将使用过的Al2O3经过简单处理,孔雀石绿溶液脱色率仍达到94.1%,催化性能稳定,可以重复利用。通过紫外可见光谱分析,表明染料分子在催化剂和光照条件下发生了降解。     

Production of laccase by Coriolus versicolor and its application in decolorization of dyestuffs: (Ⅱ) Decolorization of dyes by laccase containing fermentation broth with or without self-immobilized mycelia

The capability of decolorization for commercial dyes by Coriolus versicolur fermentation broth containing laccase with or without immobilized mycelium was evaluated.With cell-free fermentation broth containing laccase,high decolorization ratio was achieved for acid orange 7,but not for the other dyes concerned.The immobilized mycelium was proved to be more efficient than the cell-free system.All the four dyestuffs studied were found being decolourized with certain extent by immobilized mycelium.The repeated-batch decolorization was carried out with satisfactory results.The experimental data showed that the continuous decolorization of wastewater from a printing and dyeing industry was possible by using self-immobilized C.Versicolor.     

膜生物反应器去除废水中阴离子表面活性剂的研究

阴离子表面活性剂是环境中分布广泛且具有代表性的一类有机污染物.采用分置式膜生物反应器(MBR)进行去除模拟废水中阴离子表面活性荆(LAS)的实验,结果表明:MBR对阴离子表面活性荆的去除率高于90%.同时考察了阴离子表面活性荆生物降解的影响因素,确定其适宜降解条件为:气体流量为0.3m3/h、活性污泥浓度为6948mg/L.初步探讨了降解动力学和降解机理,研究表明对阴离子表面活性剂的去除符合拟一级反应动力学过程,且生物降解对其去除起主要作用.     

污泥活性炭对染料的吸附动力学研究

以城市污水处理厂脱水污泥作为原料,采用化学活化法(ZnCl2作为活化剂)制得污泥活性炭,全面研究了污泥活性炭对活性艳红K-2BP、酸性大红GR和直接紫N这3种染料的吸附动力学行为.结果表明,污泥活性炭可以有效地吸附染料,实现污泥的资源化;3种染料的平衡吸附量qe均随着染料初始浓度和温度的增大而增大,相同条件下平衡吸附量qe的大小顺序为:酸性大红GR＞活性艳红K-2BP＞直接紫N;伪二级动力学模型能够很好地描述3种染料在污泥活性炭上的吸附动力学行为;对于活性艳红K-2BP和直接紫N,颗粒内扩散过程是该吸附速率的控制步骤,但不是唯一的速率控制步骤,吸附速率同时还受颗粒外扩散过程的控制,而对于酸性大红GR,颗粒内扩散过程不是吸附速率的控制步骤;污泥活性炭对3种染料的吸附是一个吸热过程,吸附活化能较小,主要为物理吸附过程.     

Production of laccase by Coriolus versicolor and its application in decolorization of dyestuffs : (Ⅰ) Production of laccase by batch and repeated-batch processes

The production of laccase by Coriolus versicolor was studied.The effect of cultivation on laccase production by Coriolus versicolor was examined to obtain optimal medium and cultivation conditions.Both batch and repeated-batch processes were performed for laccase production.In repeated-batch fermentation with self-immobilized mycelia, total of 14 cycles were performed with laccase activity in the range between 3.4 and 14.8U/ml.     

流动注射法测定水中阴离子表面活性剂的探讨

本文采用流动注射分析技术在线测定水中阴离子表面活性剂,使用的仪器为德国BRAN＋LUEBBE公司自动分析仪。方法在0.050～0.400mg/L范围内,可以获得较好的线性方程,相关系数〉0.9990,检出限为0.015mg/L,水样的回收率在92%～109%,此方法符合水质测定阴离子表面活性剂的要求。并对影响阴离子表面活性剂测定的因素进行探讨。     

Ag-AgI/CN/MA复合物的制备及其可见光催化性能

采用沉淀法和热聚合法分别将AgI、氮化碳(CN)负载在介孔γ-Al_2O_3(MA)上,并通过光还原银离子成功制备了等离子体诱导可见光催化剂Ag-AgI/CN/MA.利用X射线衍射(XRD)、X射线光电子能谱(XPS)、场发射扫描电子显微镜(FESEM)、紫外可见漫反射光谱(UV-vis DRS)和透射电子显微镜(TEM)对Ag-AgI/CN/MA复合材料进行表征,并对其在可见光照射下(λ420 nm)的光催化性能进行了研究,考察了初始溶液pH值及催化剂投加量等条件对光催化反应的影响.结果表明,表面银以Ag+和Ag0形式共存,并且Ag和AgI均匀地分散在CN的表面.与CN和Ag-AgI/MA相比,Ag-AgI/CN/MA复合物对甲基橙(MO)具有更高的可见光催化降解效率,且反应过程中Ag+的释放量显著减少,显示出良好的稳定性.当溶液pH值为7、催化剂投加量为1 g·L~(-1)时,Ag-AgI/CN/MA-2显示出最优的催化性能.同时,其对罗丹明B(Rh B)、甲基红(MR)和刚果红(CR)等不同电性的染料均体现出良好的催化性能.     

超滤处理洗涤污水循环利用的中试研究

采用不同材质国产超滤膜聚丙烯（PP）、聚丙烯腈（PAN）和聚砜（PS）,进行了洗涤污水处理循环利用的现场中试研究.结合超滤工艺出水水质和膜污染分析,3种膜材质中PAN膜较优,有效去除了水中浊度、悬浮物、油脂等污染物,一定程度保留了游离阴离子表面活性剂（LAS）,长期循环洗涤对衣物的白度无不良影响.根据相关性分析,超滤出水较高COD值很大程度上是由水中LAS引起的.超滤膜对细菌、大肠菌群的去除率较低,出水通过紫外消毒,当紫外线密度≥3?750 J/m²时,微生物水平能够达到国家饮用水水质标准.根据不同水力反冲洗条件下膜渗透通量和净产水量比较,PAN膜最佳水力反冲洗条件为0.5 h反冲洗2 min.长期运行时超滤膜化学清洗方法采用碱洗法方便有效.     

Evaluation of reusing alum sludge for the coagulation of industrial wastewater containing mixed anionic surfactants

A coagulation-flocculation process is typically employed to treat the industrial wastewater generated by the consumer products industry manufacturing detergents, soaps, and others. The expenditure of chemicals including coagulants and chemicals for pH adjustment is costly for treating this wastewater. The objective of this study was to evaluate the feasibility of reusing the aluminum sulfate (alum) sludge as a coagulant or as a coagulation aid so that the fresh alum dosage can be minimized or the removal e ciency can be enhanced. The experiments were conducted in a jar-test apparatus simulating the coagulation-flocculation process for simultaneous removals of organic matters, anionic surfactants, suspended solids, and turbidity. At the optimum initial pH value of 10 and the fresh alum concentration of 400 mg/L, the total suspended solids (TSS), total chemical oxygen demand (TCOD), total anionic surfactants, and turbidity removal e ciencies were 71.5%, 76.4%, 95.4%, and 98.2%, respectively. The addition of alum sludge as a coagulant alone without any fresh alum addition could significantly remove the turbidity, TCOD, and anionic surfactants. The TSS was left in the supernatants after the settling period, but would subsequently be removed by adding the fresh alum. The TSS, TCOD, and turbidity removal e ciencies were also enhanced when both the alum sludge and the fresh alum were employed. The TCOD removal e ciency over 80% has been accomplished, which has never fulfilled by using the fresh alum alone. It is concluded that the alum sludge could be reused for the treatment of industrial wastewater generated by the consumer products industry.