江苏省胶合板行业甲醛污染特征及排放系数

以年产量超过10 000 m3的生产企业为研究对象，采用现场调研与采样检测相结合的方法，分析江苏省胶合板行业甲醛污染特征和排放系数。筛选60家典型企业，计算其甲醛排放系数R值（甲醛/胶粘剂）和K值（甲醛/产值）两个指标，结果表明，该省胶合板企业R均值为0.001 65 kg/kg，K均值为0.46 kg/万元。使用酚醛树脂胶的胶合板经济附加值最高，且对大气环境更友好，脲醛树脂胶的甲醛排放系数最高，应逐步减少使用。     

Determination of 27 pharmaceuticals and personal care products (PPCPs) in water: The benefit of isotope dilution

• Isotope dilution method was developed for the determination of 27 PPCPs in water. • The established method was successfully applied to different types of water samples. • The correction effect of corresponding 27 ILSs over 70 d was investigated. • Benefit of isotopic dilution method was illustrated for three examples. Pharmaceuticals and personal care products (PPCPs) are a unique group of emerging and non-persistent contaminants. In this study, 27 PPCPs in various water samples were extracted by solid phase extraction (SPE), and determined by isotope dilution method using liquid chromatography coupled to tandem triple quadruple mass spectrometer (LC-MS/MS). A total of 27 isotopically labeled standards (ILSs) were applied to correct the concentration of PPCPs in spiked ultrapure water, drinking water, river, effluent and influent sewage. The corrected recoveries were 73%–122% with the relative standard deviation (RSD)<16%, except for acetaminophen. The matrix effect for all kinds of water samples was<22% and the method quantitation limits (MQLs) were 0.45–8.6 ng/L. The developed method was successfully applied on environmental water samples. The SPE extracts of spiked ultrapure water, drinking water, river and wastewater effluent were stored for 70 days, and the ILSs-corrected recoveries of 27 PPCPs were obtained to evaluate the correction ability of ILSs in the presence of variety interferences. The recoveries of 27 PPCPs over 70 days were within the scope of 72%–140% with the recovery variation<37% in all cases. The isotope dilution method seems to be of benefit when the extract has to be stored for long time before the instrument analysis.     

固相萃取-超高效液相色谱/三重四极杆质谱法同时测定地表水中8种亚硝胺类化合物

建立了固相萃取（SPE）-超高效液相色谱/三重四极杆串联质谱（UPLC-MS/MS）同时测定地表水中8种亚硝胺类化合物的方法。水样中目标物经椰壳活性炭固相萃取小柱吸附富集，小柱经氮气吹干后采用二氯甲烷洗脱。待测样品采用Atlantis T₃柱，以水-甲醇作为流动相进行梯度洗脱，大气压力化学电离源（APCI）正离子模式多反应监测方式（MRM）进行检测，内标法定量分析。8种目标物在相关线性范围内线性良好(r≥0.9950)，地表水加标回收率为55.4%~90.4%，相对标准偏差为3.1%~14.3%，方法检出限为1.1 ~1.8 ng/L。本方法准确度和灵敏度高，适用于快速测定地表水中8种亚硝胺类化合物含量。     

Selection and integration of environmental impacts in the Danish transport infrastructure assessment process

Transport projects have numerous consequences for the environment, society and economy, and thus an EU Directive has stated a number of impacts that need to be assessed prior to any major intervention. This paper is set in a Danish context where the EU requirements have been adopted in the Environmental Impact Assessment (EIA) regulation along with national requirements. In recent years, however, the EIAs have been criticised for an inconsistent inclusion of impacts and unclear assessment process. A selection of EIAs is for this reason reviewed and compared to the EU Directive and corresponding works in Sweden and the UK to identify potential opportunities for improvements. From the literature study, an overview table with all potential relevant impacts for transport projects is set up to assist the EIA process. For the sake of simplicity and transparency, the impacts selected from this table should, however, be further reduced in number to ensure that only the most important impacts are included in the process. To further increase simplicity and transparency in the EIA process, a novel framework for assessing different types of impacts is proposed. In this framework, a comprehensive decision support tool involving stakeholders is in focus. The framework is supplemented with a procedure for generating objectives and presenting results in an appropriate way to the many stakeholders involved. The impacts overview table and the assessment techniques are applied to a case study to illustrate the process, and finally, conclusions and perspectives for future work within the field are set out.     

山东省主要河流中抗生素污染组成及空间分布特征

采用固相萃取-液相色谱/串联质谱法研究了山东省境内四大流域主要河流中抗生素污染组成及空间分布特征,涉及我国用量最大的6类共20种抗生素。结果表明:20种抗生素均有检出,且大环内酯类、喹诺酮类和四环素类抗生素整体检出浓度较高。就流域而言,半岛诸河流域抗生素污染较小,平均总质量浓度61.4 ng/L;海河流域、小清河流域和淮河流域相对较为严重,平均总质量浓度分别为232、175、118 ng/L。抗生素空间分布呈现一定的规律,检出浓度较高的点位主要集中在人口密集区下游,抗生素污染与周边生活污水、养殖企业废水和城市污水处理厂排水密切相关,而且抗生素组成可从一定程度上反映出污染来源。     

2016—2017年武汉市城区大气PM2.5污染特征及来源解析

利用2016年1月至2017年9月湖北省环境监测中心站大气复合污染自动监测站的在线监测数据，对武汉市城区PM_2.5的污染特征及主要来源进行解析。结果表明，武汉市城区PM_2.5质量浓度呈现出明显的季节差异，季节变化规律为冬季>春季>秋季>夏季。水溶性离子的主要成分SO₄^2-、NO₃^-和NH₄⁺占总离子质量浓度的82.0%。PM_2.5中阴离子相对阳离子较为亏损，颗粒整体呈碱性。夏季气态污染物的氧化程度较高且SO₂较NO₂氧化程度高。后向轨迹分析结果表明，区域传输是武汉市PM_2.5的一个重要来源，在4个典型重污染阶段，武汉市分别受到局地、东北、西北及西南方向气团传输的影响。PMF模型解析出武汉市PM_2.5五大主要来源及平均贡献率：扬尘22.0%、机动车排放27.7%、二次气溶胶21.6%、重油燃烧14.9%和生物质燃烧13.8%。     

交通限行对大气颗粒物及PM2.5中二NFDA1英的影响

为了研究北京大气颗粒物和二NFDA1英(PCDD/Fs)的污染状况以及评估交通限行对大气颗粒物和PCDD/Fs的影响。利用同位素稀释高分辨率气相色谱/高分辨率质谱(HRGC/HRMS)联用法和USEPA 1613B 标准方法,以中国地质大学(北京)东门为采样点,采集大气PM_2.5、PM₁₀、TSP样品,对北京市交通限行期间以及交通限行前后等不同交通状况下颗粒物浓度及大气PM_2.5中17种2,3,7,8-PCDD/Fs污染特征进行了监测。结果表明,PM_2.5、PM₁₀、TSP的日均质量浓度在交通限行前分别为126、202、304 μg/m³,限行期间分别为39、78、93 μg/m³,限行结束后分别为79、126 μg/m³。PM_2.5中17种PCDD/Fs的质量浓度(毒性浓度)3个时段分别为1 804 fg/m³(70 fg I-TEQ/m³)、252 fg/m³ (9 fg I-TEQ/m³)和1 196 fg/m³ (48 fg I-TEQ/m³)。北京市交通限行期间颗粒物浓度和二 NFDA1 英浓度显著低于交通限行前后,交通源减排措施的实施是大气颗粒物和二 NFDA1英污染水平降低的主要原因,从减排效果看,交通源减排措施对大气细颗粒物(PM_2.5)的控制效果明显好于大气粗颗粒物。     

含氮生物降解促进剂对土壤吸附正十六烷的影响

选用正十六烷模拟润滑油,通过振荡平衡实验,考察了两种含氮脂肪酸型生物降解促进剂（甲基二乙醇胺油酸酯（MDEAO）和油酸二乙醇酰胺（ODEA））对水土体系中正十六烷吸附行为的影响。实验结果表明：正十六烷在水土体系中的有机质标化分配系数与土壤种类无关,与生物降解促进剂种类有关;土壤对正十六烷的吸附过程更符合Freundlich等温吸附模型;MDEAO的临界胶束浓度为2.0 mg/L,对土壤吸附正十六烷有一定的促进作用,ODEA的临界胶束浓度为0.7 mg/L,形成的胶束对正十六烷的增溶效果明显,促进了正十六烷在土壤中的解吸。     

Backwater Confluences of the Ohio River: Organic and Inorganic Fingerprints Explain Sediment Dynamics in Wetlands and Marinas

In the Ohio River (OR), backwater confluence sedimentation dynamics are understudied, however, these river features are expected to be influential on the system’s ecological and economic function when integrated along the river’s length. In the following paper, we test the efficacy of organic and inorganic tracers for sediment fingerprinting in backwater confluences; we use fingerprinting results to evidence sediment dynamics controlling deposition patterns in confluences used for wetland and marina functions; and we quantify the spatial extent of tributary drainages with wetland and marina features in OR confluences. Both organic and inorganic tracers statistically differentiate sediment from stream and river end‐members. Carbon and nitrogen stable isotopes produce greater uncertainty in fingerprinting results than inorganic elemental tracers. Uncertainty analysis of the nonconservative tracer term in the organic matter fingerprinting application estimates an apparent enrichment of the carbon stable isotopes during instream residence, and the nonconservativeness is quantified with a statistical approach unique to the fingerprinting literature. Wetland and marina features in OR confluences impact 42% and 11% of tributary drainage areas, respectively. Sediment dynamics show wetland and marina confluences experience deposition from river backwaters with longitudinally linear and nonlinear patterns, respectively, from sediment sources.     

Enhanced triallyl isocyanurate (TAIC) degradation through application of an O3/UV process: Performance optimization and degradation pathways

• UV/O₃ process had higher TAIC mineralization rate than O₃ process. • Four possible degradation pathways were proposed during TAIC degradation. • pH impacted oxidation processes with pH of 9 achieving maximum efficiency. • CO₃^2– negatively impacted TAIC degradation while HCO₃^– not. • Cl^– can be radicals scavenger only at high concentration (over 500 mg/L Cl^–). Triallyl isocyanurate (TAIC, C₁₂H₁₅N₃O₃) has featured in wastewater treatment as a refractory organic compound due to the significant production capability and negative environmental impact. TAIC degradation was enhanced when an ozone(O₃)/ultraviolet(UV) process was applied compared with the application of an independent O₃ process. Although 99% of TAIC could be degraded in 5 min during both processes, the O₃/UV process had a 70%mineralization rate that was much higher than that of the independent O₃ process (9%) in 30 min. Four possible degradation pathways were proposed based on the organic compounds of intermediate products identified during TAIC degradation through the application of independent O₃ and O₃/UV processes. pH impacted both the direct and indirect oxidation processes. Acidic and alkaline conditions preferred direct and indirect reactions respectively, with a pH of 9 achieving maximum Total Organic Carbon (TOC) removal. Both CO₃^2– and HCO₃^– decreased TOC removal, however only CO₃^2– negatively impacted TAIC degradation. Effects of Cl^– as a radical scavenger became more marked only at high concentrations (over 500 mg/L Cl^–). Particulate and suspended matter could hinder the transmission of ultraviolet light and reduce the production of HO· accordingly.