Unintentional non-traffic injury and fatal events: Threats to children in and around vehicles

Objective: There have been substantial reductions in motor vehicle crash–related child fatalities due to advances in legislation, public safety campaigns, and engineering. Less is known about non-traffic injuries and fatalities to children in and around motor vehicles. The objective of this study was to describe the frequency of various non-traffic incidents, injuries, and fatalities to children using a unique surveillance system and database.

Methods: Instances of non-traffic injuries and fatalities in the United States to children 0–14 years were tracked from January 1990 to December 2014 using a compilation of sources including media reports, individual accounts from families of affected children, medical examiner reports, police reports, child death review teams, coroner reports, medical professionals, legal professionals, and other various modes of publication.

Results: Over the 25-year period, there were at least 11,759 events resulting in 3,396 deaths. The median age of the affected child was 3.7 years. The incident types included 3,115 children unattended in hot vehicles resulting in 729 deaths, 2,251 backovers resulting in 1,232 deaths, 1,439 frontovers resulting in 692 deaths, 777 vehicles knocked into motion resulting in 227 deaths, 415 underage drivers resulting in 203 deaths, 172 power window incidents resulting in 61 deaths, 134 falls resulting in 54 deaths, 79 fires resulting in 41 deaths, and 3,377 other incidents resulting in 157 deaths.

Conclusions: Non-traffic injuries and fatalities present an important threat to the safety and lives of very young children. Future efforts should consider complementary surveillance mechanisms to systematically and comprehensively capture all non-traffic incidents. Continued education, engineering modifications, advocacy, and legislation can help continue to prevent these incidents and must be incorporated in overall child vehicle safety initiatives.     

Safety assessment of the film boiling chemical vapor infiltration (FB-CVI) process through a system-theoretic accident model and process (STAMP)

Film boiling chemical vapor infiltration (FB-CVI) is considered as one of the fastest process methodologies for manufacturing carbon-carbon (C–C) composite products and possesses various advantages compared to conventional methodologies. However, there are safety concerns associated with this process for large-scale manufacturing, mainly owing to the intrinsic nature of the precursor and the process conditions. Considering the multifunctional interactions of the various systems during the process, a system-theoretic process analysis (STPA)/system theoretic accident model and process (STAMP) model is used to perform a safety analysis of the hazardous states of the FB-CVI process at the system level. As a case study, the FB-CVI process equipment employed for the manufacturing of C–C composites is considered. The safety constraints present in the system are assessed for adequacy through a hazard analysis by STPA/STAMP. The analysis through STPA/STAMP demonstrated the capability to create proactive strategies for the design and realization of process equipment that can be employed to manufacture C–C composite products through the FB-CVI process.     

Heat dissipation characteristic in the intake grille and radiator of a fuel cell vehicle

ABSTRACT

In this study, a three-dimension (3D) computational model was proposed to investigate the flow and heat transfer characteristics of the intake grilles of two different fuel cell vehicles. The models of the intake grilles were constructed according to the actual sizes of two vehicles, namely, Roewe 950 and Toyota Mirai, considering the heat dissipation unit to simplify the heat transfer model of the vehicle. The results showed that relative to Roewe 950, Mirai intake air flow rate was approximately 10% higher, the heat transfer capacity was approximately 7% higher, and the intake grille area was larger. The coolant outlet temperature of Mirai was lower than that of Roewe 950, which was beneficial for the long term and stable operation of a fuel cell. This comparative study provided guidance for the intake grille and radiator design of fuel cell vehicles. The only difference between fuel cell vehicles on the market and conventional vehicles was that in the former, the internal combustion engine was replaced with a fuel cell stack, which had insufficient heat transfer capacity because of the reducing temperature difference. Increasing the intake grille area and the heat exchange capacity of the radiator were the key issues for the development of fuel cell vehicles. In this study, an optimal window opening angle of the radiator fin of 23° provided a maximal heat transfer coefficient.     

密相塔半干法烟气脱硫塔内加湿降温及其对脱硫效率的影响

为了实现密相塔半干法脱硫工艺的精确加湿进一步提高系统脱硫效率,利用推导出的传热传质计算方法,得到烟气温度降低和加水量的关系.结合3组密相塔半干法工程实际数据,发现理论计算值和实测值误差区间仅为2.9％ ～5.4％.通过选取河北某钢厂210 m2烧结烟气密相塔半干法脱硫项目实际在线检测数据,发现循环脱硫灰含湿量为3％的系统脱硫效率整体高于含湿量为5％和4％的样品,最大值达93.56％.通过粒度分析、扫描电镜、X射线衍射及差热-热重对2种不同含湿量的循环脱硫灰进行表征,结果表明,含湿量为3％的循环脱硫灰较含湿量为5％的样品粒径小、比表面积大,无团聚现象,物相分析还证实相对于含湿量为5％样品,其Ca(OH)2和结晶水含量少,几乎都是CaSO4和CaS03干态物质,因此脱硫反应进行彻底,脱硫效率较高.     

Information technologies and the sharing of disaster knowledge: the critical role of professional culture

A comparative survey of a diverse sample of 96 US and Italian emergency management agencies shows that the diffusion of new information technologies (IT) has transformed disaster communications. Although these technologies permit access to and the dissemination of massive amounts of disaster information with unprecedented speed and efficiency, barriers rooted in the various professional cultures still hinder the sharing of disaster knowledge. To be effective the available IT must be attuned to the unique settings and professional cultures of the local emergency management communities. Findings show that available technology, context, professional culture and interaction are key factors that affect the knowledge transfer process. Cultural filters appear to influence emergency managers' perceptions of their own professional roles, their vision of the applicability of technology to social issues, and their perspective on the transferability of disaster knowledge. Four cultural approaches to the application of IT to disaster communications are defined: technocentric; geographic,; anthropocentric; and ecocentric.     

外商投资的区位变动分析

文章利用1983—2000年的统计数据，通过比较分析方法，分析了我国外商投资区位的转移及其影响因素的变化，综合评价了我国中部5省、华东和西部的区位优势，提出了有利于吸引外商投资的建议。     

省以下生态转移支付制度环境保护激励效应

现有文献认为生态转移支付具有基本公共服务均等化与提升地方生态环境质量双目标,而目标的多样性会影响地方财政转移支付资金效果及目标的实现。文章基于环保支出和农林水支出的中介与调节效应,对生态转移支付的生态环境目标进行了理论分析,利用2010—2018年甘肃、贵州、湖北及河南四省的199个县的面板数据进行实证检验。实证研究表明:在样本期内,生态转移支付促进了地方生态环境质量的提升,中介效应和调节效应模型的结果表明,中国地方生态转移支付资金对辖区环境保护效果中,环境保护支出起到部分中介效应,农林水支出不仅调节了生态转移支付的地方环境保护支出效果,而且调节了环境保护支出对地方环境质量的影响。因此,由于地方政府具有环境治理信息优势,省以下制度目标更能体现辖区生态需求,省对县生态转移支付制度会有效促进地方生态环境质量的改善,环保激励效应较为明显。同时,县级地方政府应该逐步摆脱"先污染后治理"的路径依赖,逐步转向经济与环境"双目标协同发展"模式。为了协同生态转移支付的双目标,"自下而上参与式决策"可以作为环境治理的有益补充,通过地方政府多元化实践改善环境质量。     

内饰材料发射率对密封舱室热防护效率的影响

目的探究密封舱室热防护效率与其内饰材料表面发射率的关系,分析内饰材料发射率对其表面温度、舱室内温度的影响规律。方法采用自行设计的小型密封舱室和加热测量装置,对内饰材料表面及舱室内温度进行测量。结果当内饰材料发射率为0.09时,内饰表面温度为141.2℃,舱室内平均温度仅为90.8℃;内饰材料发射率为0.91时,内饰表面温度为124.4℃,舱室内平均温度为109.1℃。结论试样表面温度随材料发射率的提高而降低,舱室内部空气平均温度随材料发射率的提高而升高;试样表面温度与舱室空气平均温度的温度差随材料发射率的提高而减小;同时,相同试样表面温度与舱室平均温度的温度差随加热温度的提高而增加。     

云南兰坪铅锌矿区优势植物重金属富集特性及应用潜力

为筛选适合云南高原地区重金属污染土壤修复治理以及矿区生态复垦的植物材料,通过实地野外调查,采集云南兰坪铅锌矿区18种优势植物样品及相应根系土壤,测定其Cd、 Cr、 Cu、 Ni、 Pb和Zn含量,计算植物对重金属的富集和转运系数,通过聚类分析方法,综合评估植物的应用潜力.结果表明, 18种优势植物分属18属13科,均为草本植物.植物体内多种重金属含量均高于植物正常含量,其中,延胡索(Corydalis yanhusuo)、旱芹菜(Carum bretschneideri)和毛连菜(Picris hieracioides)地上部Cd含量分别达到62.29、 76.49和85.09 mg·kg~(-1),Cd富集系数分别为0.57、 0.58和0.66,转运系数分别为0.89、 0.45和1.48,有着较强的吸收和转移土壤重金属Cd能力,具有修复Cd污染土壤潜力.狼毒(Euphorbia fischeriana)和倒提壶(Cynoglossum amabile)地上部Cd含量分别为0.46 mg·kg~(-1)和0.23 mg·kg~(-1),富集系数均小于0.01,属于重金属低积累植物,适合在中国西南高海拔地区生长,两种植物可以考虑作为Cd污染农田安全利用经济植物.其余13种植物对矿区重金属污染有着较好的耐性,可以用作矿区植被修复.     

华北地区沙尘天气垂直气溶胶直接辐射强迫

利用CALIOP数据和SBDART（Santa Barbara DISORT Atmospheric Radiative Transfer）辐射传输模式研究了2013~2016年华北地区8d沙尘天气气溶胶及其直接辐射强迫垂直分布特征,分析了气溶胶垂直分布和光学特性对直接辐射强迫的影响.结果表明,气溶胶集中分布在地表及以上3km范围,其中纯净沙尘型和污染沙尘型气溶胶位于上层,污染大陆型气溶胶和烟雾位于下层.大气层顶、地表和大气层的日均气溶胶直接辐射强迫分别是-38.41~-88.44,-74.03~-225.86,9.06~137.42W/m².0~8km高度范围气溶胶直接辐射强迫是负值,且随着高度的增加绝对值逐渐减小.气溶胶垂直分布对大气层顶、地表和大气层的直接辐射强迫影响较小,但对直接辐射强迫垂直分布影响较大,由气溶胶廓线差异造成的同一高度层气溶胶直接辐射强迫最大差值能达到31.18W/m².气溶胶光学厚度和单次散射反照率对直接辐射强迫影响明显.消光能力相同时,吸收性气溶胶对短波太阳光的衰减作用大于散射性气溶胶,后向散射比例大的气溶胶大于后向散射比例小的气溶胶.