Influence of pore structure on biologically activated carbon performance and biofilm microbial characteristics

• Pore structure affects biologically activated carbon performance. • Pore structure determines organic matter (OM) removal mechanism. • Microbial community structure is related to pore structure and OM removal. Optimizing the characteristics of granular activated carbon (GAC) can improve the performance of biologically activated carbon (BAC) filters, and iodine value has always been the principal index for GAC selection. However, in this study, among three types of GAC treating the same humic acid-contaminated water, one had an iodine value 35% lower than the other two, but the dissolved organic carbon removal efficiency of its BAC was less than 5% away from the others. Iodine value was found to influence the removal of different organic fractions instead of the total removal efficiency. Based on the removal and biological characteristics, two possible mechanisms of organic matter removal during steady-state were suggested. For GAC with poor micropore volume and iodine value, high molecular weight substances (3500–9000 Da) were removed mainly through degradation by microorganisms, and the biodegraded organics (soluble microbial by-products,<3500 Da) were released because of the low adsorption capacity of activated carbon. For GAC with higher micropore volume and iodine value, organics with low molecular weight (<3500 Da) were more easily removed, first being adsorbed by micropores and then biodegraded by the biofilm. The biomass was determined by the pore volume with pore diameters greater than 100 μm, but did not correspond to the removal efficiency. Nevertheless, the microbial community structure was coordinate with both the pore structure and the organic removal characteristics. The findings provide a theoretical basis for selecting GAC for the BAC process based on its pore structure.     

基于改进的非线性GM(1,1)模型的职业病预测研究

为了更准确地预测职业病，在传统GM(1,1)模型的基础上，提出改进的非线性GM(1,1)模型，在传统的GM(1,1)模型中引入弱化算子，将紧邻均值与原始数据之间的线性假设改为非线性假设，提高曲线的拟合度。以2005—2014年的全国职业病例数为研究对象，进行数据拟合和预测分析，其中以2014年职业病例数作为验证数据，并利用后验差比值和小误差概率2个参数，检验该改进模型的预测精度。由应用实例的分析结果可知:在职业病发病趋势的预测方面，改进的非线性GM(1,1)模型的预测精度提高到一级，曲线拟合度较高，预测得到2015年的职业病例数为34 900例。     

西南山地区域森林火险综合预报模型研究——以重庆市为例

森林火灾严重破坏森林生态系统的结构和功能,针对其风险预报开展研究具有重要的理论意义和应用价值。通过融合气象、地表覆盖和人类活动等要素的方式构建森林火险综合预报模型,是西南山地区域森林火险综合预报业务化应用的重要发展方向。基于《森林火险气象等级》国家标准(GB/T 36743-2018),本文研究首先构建了重庆市森林火险气象风险预报模型。然后通过融合可燃物因素和人为因素的方式,进一步构建重庆市森林火险综合预报模型。最后利用历史火点数据针对上述两类模型的精度进行对比和分析。研究结果表明:重庆市森林火灾发生次数较多,且呈现出季节性规律;重庆市森林火灾的发生不仅受到气象条件的影响,而且受到地表覆盖和人类活动等多种要素条件的共同影响;与森林火险气象风险预报结果相比,森林火险综合预报结果在空间分布上具有更高的精细程度;森林火险综合预报模型能有效提高森林火险等级预报精度。     

不同类型活性炭处理废水中重金属离子的研究进展

重金属对人体的显著毒性和难降解的特性,使重金属水体污染成为全球性关注的环境问题。本文综述了重金属废水的危害、来源及常用处理方法,比较了不同类型活性炭处理废水中重金属离子的差异,阐述了不同类型活性炭处理技术的优势和特点,并对今后的重金属废水处理技术研究方向进行了展望。     

道路交通噪声预测声源简化研究

为了分析《环境影响评价技术导则声环境》(HJ 2.4—2009)中将道路声源简化为1条位于道路中心线处的线声源与按照车道数简化为多条线声源之间的误差,针对不同宽度的道路,推导了多条线声源与1条线声源在接收点噪声影响的误差计算公式,并基于Predictor-lima预测软件预测和现场噪声衰减规律实测进行了验证。研究结果表明,对于接收点到道路边缘的距离大于道路宽度的情况,可简化为1条线声源;对于接收点到道路边缘的距离小于道路宽度的情况,应按照车道数简化为多条线声源。     

微波强化CWPO工艺CuO_x-CeO_2/GAC催化剂的制备及其对二甲亚砜的降解

以颗粒活性炭(GAC)为载体、铜为活性组分、铈为助剂组分、草酸钠为沉淀剂,采用浸渍焙烧法制得CuO_x-CeO_2/GAC催化剂。以H_2O_2为氧化剂,微波强化催化湿式过氧化氢氧化(CWPO)处理二甲亚砜(DMSO)初始质量浓度为1 000 mg/L的废水,处理3 min后DMSO去除率达93.8%。催化剂第7次使用时DMSO去除率仍保持在75%以上。初始废水pH在3~9范围内,DMSO去除率均在85%以上。助剂Ce的加入提高了催化剂表面活性组分的分散性和稳定性,使催化剂的活性稳定性和使用寿命显著提高。     

三维电极电Fenton氧化法处理染料废水

采用三维电极电Fenton氧化法处理实际染料废水,探究了染料废水处理效果的影响因素。实验结果表明：以钌铱镀层钛电极为阳极、不锈钢板为阴极、粉末活性炭为颗粒电极,在粉末活性炭投加量为2.0 g/L、电流密度为0.5 mA/mm²、极板间距为3 cm、pH为2.0、硫酸亚铁投加量为0.50 g/L的最优工艺条件下,反应2 h后COD、TOC、氨氮、色度的去除率达到最大,分别为62.80%、41.15%、42.48%和95.00%;粉末活性炭作为颗粒电极可使染料废水COD去除率提高18个百分点;重复使用10次的处理效果与第2次基本持平。     

Review: recent advances in biogas purifying technologies

Biomethane production through biogas upgrading is a promising renewable energy for some industries which could be part of the equilibrium needed with fossil fuels consumption to achieve a sustainable society. This paper presents a comprehensive list of biogas upgrading technologies focused on carbon dioxide removal as well as recent advances reported by researcher with wide expertise in this topic. Additionally, an extensive costs–performance comparison among the technologies studied is discussed. Among the different alternatives, chemical scrubbing stood out to achieve high biomethane purities while cryogenic technologies proved to be effective against methane losses. Regarding the different costs, water scrubbing and membrane separation seem to be the most affordable techniques.     

Cumulative carbon emissions and economic policy: In search of general principles

We exploit recent advances in climate science to develop a physically consistent, yet surprisingly simple, model of climate policy. It seems that key economic models have greatly overestimated the delay between carbon emissions and warming, and ignored the saturation of carbon sinks that takes place when the atmospheric concentration of carbon dioxide rises. This has important implications for climate policy. If carbon emissions are abated, damages are avoided almost immediately. Therefore it is optimal to reduce emissions significantly in the near term and bring about a slow transition to optimal peak warming, even if optimal steady-state/peak warming is high. The optimal carbon price should start relatively high and grow relatively fast.