Toward sustainable use of natural resources: Nexus between resource rents,affluence, energy intensity and carbon emissions in developing and transition economies

Sustainable use of natural resources would entail ensuring that derived economic benefits today do not undermine the welfare of generations to come. On this basis, this study examines the nexus between natural resource rents and carbon dioxide (CO₂) emissions disaggregated into production and consumption-based (i.e., trade-adjusted) CO₂ emissions for a selected panel of 45 developing and transition economies over the period 1995–2017. The empirical model also incorporates the impacts of population, affluence, and energy intensity. The results show that affluence increases production-based CO₂ emissions by 1.407%, with the EKC's predicted inverted U-shaped curve only explaining consumption-based CO₂ emissions. Economic reliance on natural resource rents and energy intensification contribute 0.022% and 0.766%, respectively, to CO₂ emissions embedded in territorial production inventories and 0.035% and 0.583%, respectively, to CO₂ emissions embedded in consumption inventories. The bootstrap non-causality test shows that historical data on each variable has significant predictive power for future CO₂ emissions from both sources. The historical information about natural resource rents has significant predictive power over the future levels of affluence and energy intensity. Clearly, the results show that the environmental impact of natural resource rents is stronger when CO₂ emissions are adjusted for trade and varies among the countries, with Bangladesh, Guinea, India, Malaysia, Mexico, Nigeria, Pakistan, Saudi Arabia, Vietnam, and Zimbabwe among the most affected countries. Overall, this study provides motivation for policies to keep the use of natural resources within sustainable limits.     

Influence of pore structure on biologically activated carbon performance and biofilm microbial characteristics

• Pore structure affects biologically activated carbon performance. • Pore structure determines organic matter (OM) removal mechanism. • Microbial community structure is related to pore structure and OM removal. Optimizing the characteristics of granular activated carbon (GAC) can improve the performance of biologically activated carbon (BAC) filters, and iodine value has always been the principal index for GAC selection. However, in this study, among three types of GAC treating the same humic acid-contaminated water, one had an iodine value 35% lower than the other two, but the dissolved organic carbon removal efficiency of its BAC was less than 5% away from the others. Iodine value was found to influence the removal of different organic fractions instead of the total removal efficiency. Based on the removal and biological characteristics, two possible mechanisms of organic matter removal during steady-state were suggested. For GAC with poor micropore volume and iodine value, high molecular weight substances (3500–9000 Da) were removed mainly through degradation by microorganisms, and the biodegraded organics (soluble microbial by-products,<3500 Da) were released because of the low adsorption capacity of activated carbon. For GAC with higher micropore volume and iodine value, organics with low molecular weight (<3500 Da) were more easily removed, first being adsorbed by micropores and then biodegraded by the biofilm. The biomass was determined by the pore volume with pore diameters greater than 100 μm, but did not correspond to the removal efficiency. Nevertheless, the microbial community structure was coordinate with both the pore structure and the organic removal characteristics. The findings provide a theoretical basis for selecting GAC for the BAC process based on its pore structure.     

贵阳市城区PM10和PM2.5水溶性离子特征分析

分别于2013年10月和2014年2月、5月、7月在贵阳市城区3个环境空气质量监测国控点位（南明区市监测站、云岩区黔灵公园马鞍山和观山湖区贵阳一中）进行PM₁₀、PM_2.5样品采集，并对10种水溶性离子（SO₄^2-、NO₂^-、NO₃^-、NH₄⁺、Cl^-、F^-、Na⁺、K⁺、Mg²⁺、Ca²⁺）的含量进行了分析。结果表明，研究时段内，贵阳市3个点位PM₁₀、PM_2.5平均质量浓度分别为（64.8±25.5）、（46.6±21.2）μg/m³。其中，云岩区黔灵公园马鞍山点位的颗粒物浓度最低，南明区市监测站点位最高。3个点位PM_2.5平均浓度与PM₁₀平均浓度的比值为0.719，表明贵阳市城区PM₁₀中，PM_2.5占主导地位。水溶性离子分析显示，SO₄^2-、NO₂^-、NO₃^-、NH₄⁺、Cl^-、F^-、Na⁺、K⁺主要分布在PM_2.5中，Mg²⁺、Ca²⁺主要分布在PM₁₀中。3个点位PM₁₀和PM_2.5中的水溶性离子均表现为SO₄^2-、NH₄⁺、Ca²⁺浓度较大，F^-、NO₂^-较小，表明3个点位的污染源总体相同，且水溶性离子占PM₁₀、PM_2.5含量的比例达33.6%~48.1%。贵阳市城区大气中的SO₂转化率在5月、7月、10月较高，2月最低，主要是由于5月、7月、10月的高温、高湿、强辐射环境条件促进了SO₂向SO₄^2-的转化。阴阳离子平衡分析表明，贵阳市城区PM₁₀、PM_2.5呈现出偏碱性的特征。水溶性离子主成分分析表明，贵阳市城区PM₁₀中的水溶性离子主要来源于城市扬尘、生物质燃烧尘、煤烟尘、建筑尘以及二次粒子，PM_2.5中水溶性离子的来源与PM₁₀较为相似。     

北京市城区挥发性有机物污染特征及其对臭氧影响分析

对2020年4月—2021年3月北京市建成区挥发性有机物（VOCs）的化学特征、污染来源及其对臭氧（O₃）污染的影响进行了研究。结果显示：O₃日最大8 h滑动平均值在臭氧季（4—9月）均值为134 μg/m³，是非臭氧季（10月至次年3月）均值（59.6 μg/m³）的2.2倍。臭氧季VOCs体积浓度均值为14.3×10^-9，明显低于非臭氧季（21.1×10^-9），可能与光化学反应速率和VOCs来源的季节性差异有关。臭氧生成潜势（OFP）贡献率排名前10位的物种在臭氧季和非臭氧季相似，均包括间/对-二甲苯、甲苯、乙烯、邻二甲苯、异戊烷、正丁烷、丙烯、反式-2-丁烯和1，2，4-三甲基苯，但排名有所差异，燃煤源特征明显的乙烯等物种在非臭氧季上升明显，与溶剂使用、油气挥发相关的间/对二甲苯、甲苯、异戊烷和正丁烷等物种在臭氧季上升明显。甲苯/苯的值和异戊烷/正戊烷的值在臭氧季明显高于非臭氧季，反映出机动车排放和油气挥发等在臭氧季影响突出，非臭氧季是燃煤影响显著。基于正交矩阵因子分解模型（PMF），臭氧季解析出机动车尾气排放（40.9%）、溶剂使用（20%）、油气挥发（16.4%）、工业排放（17.6%）和植物排放（5.1%）等5种污染源；非臭氧季解析出机动车尾气（38.9%）、燃烧源（26.3%）、工业排放（17.8%）和溶剂使用（17%）等4种污染源。     

Catalytic fast pyrolysis of walnut shell for alkylphenols production with nitrogen-doped activated carbon catalyst

• N-doped activated carbon was prepared for catalytic pyrolysis of walnut shell. • Alkylphenols were selectively produced from catalytic pyrolysis process. • The alkylphenols yield increased by 8.5 times under the optimal conditions. • Formation mechanism of alkylphenols was proposed. Alkylphenols are a group of valuable phenolic compounds that can be derived from lignocellulosic biomass. In this study, three activated carbons (ACs) were prepared for catalytic fast pyrolysis (CFP) of walnut shell to produce alkylphenols, including nitrogen-doped walnut shell-derived activated carbon (N/WSAC), nitrogen-doped rice husk-derived activated carbon (N/RHAC) and walnut shell-derived activated carbon (WSAC). Pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) experiments were carried out to reveal the influences of AC type, pyrolytic temperature, and AC-to-walnut shell (AC-to-WS) ratio on the product distributions. Results showed that with nitrogen doping, the N/WSAC possessed stronger capability than WSAC toward the alkylphenols production, and moreover, the N/WSAC also exhibited better effects than N/RHAC to prepare alkylphenols. Under the catalysis of N/WSAC, yields of alkylphenols were significantly increased, especially phenol, cresol and 4-ethylphenol. As the increase of pyrolytic temperature, the alkylphenols yield first increased and then decreased, while high selectivity could be obtained at low pyrolytic temperatures. Such a trend was also observed as the AC-to-WS ratio continuously increased. The alkylphenols production achieved a maximal yield of 44.19 mg/g with the corresponding selectivity of 34.7% at the pyrolytic temperature of 400°C and AC-to-WS ratio of 3, compared with those of only 4.67 mg/g and 6.1% without catalyst. In addition, the possible formation mechanism of alkylphenols was also proposed with the catalysis of N/WSAC.     

The in situ treatment of TCE and PFAS in groundwater within a silty sand aquifer

Chlorinated ethenes such as trichloroethene (TCE), cis‐1,2‐dichloroethene (cis‐1,2‐DCE), and vinyl chloride along with per‐ and polyfluoroalkyl substances (PFAS) have been identified as chemicals of concern in groundwater; with many of the compounds being confirmed as being carcinogens or suspected carcinogens. While there are a variety of demonstrated in‐situ technologies for the treatment of chlorinated ethenes, there are limited technologies available to treat PFAS in groundwater. At a former industrial site shallow groundwater was impacted with TCE, cis‐1,2‐DCE, and vinyl chloride at concentrations up to 985, 258, and 54 µg/L, respectively. The groundwater also contained maximum concentrations of the following PFAS: 12,800 ng/L of perfluoropentanoic acid, 3,240 ng/L of perfluorohexanoic acid, 795 ng/L of perfluorobutanoic acid, 950 ng/L of perfluorooctanoic acid, and 2,140 ng/L of perfluorooctanesulfonic acid. Using a combination of adsorption, biotic, and abiotic degradation in situ remedial approaches, the chemicals of concern were targeted for removal from the groundwater with adsorption being utilized for PFAS whereas adsorption, chemical reduction, and anaerobic biodegradation were used for the chlorinated ethenes. Sampling of the groundwater over a 24‐month period indicated that the detected PFAS were treated to either their detection, or below the analytical detection limit over the monitoring period. Postinjection results for TCE, cis‐1,2‐DCE, and vinyl chloride indicated that the concentrations of the three compounds decreased by an order of magnitude within 4 months of injection, with TCE decreasing to below the analytical detection limit over the 24‐month monitoring period. Cis‐1,2‐DCE, and vinyl chloride concentrations decreased by over 99% within 8 months of injections, remaining at or below these concentrations during the 24‐month monitoring period. Analyses of Dehalococcoides, ethene, and acetylene over time suggest that microbiological and reductive dechlorination were occurring in conjunction with adsorption to attenuate the chlorinated ethenes and PFAS within the aquifer. Analysis of soil cores collected pre‐ and post‐injection, indicated that the distribution of the colloidal activated carbon was influenced by small scale heterogeneities within the aquifer. However, all aquifer samples collected within the targeted injection zone contained total organic carbon at concentrations at least one order of magnitude greater than the preinjection total organic carbon concentrations.     

梵净山不同森林植被生物量、净生产量、碳储量及空间分布特征

为做好梵净山国家级自然保护区森林植被保护,摸清自然保护区森林植被资源家底,采用2016年第四次森林资源规划设计调查数据及变更至2019年的森林资源数据,计算和分析保护区内森林植被生物量、净生产量、碳储量。梵净山8种森林类型的总生物量为443.72×10⁴t,总碳储量为219.80×10⁴t,总生长量为29.75×10⁴t·a^?1,总凋落量为18.65×10⁴t·a^?1,总净生产量为48.40×10⁴t·a^?1,总生物量、总碳储量较大的是栎林,较小的是铁杉林,桦木林、阔叶混交林、马尾松林、软阔林、杉木林和硬阔林居中;平均碳密度为48.86 t·hm^?2,依次为:桦木林>阔叶混交林>栎林>硬阔林>软阔林>马尾松林>杉木林>铁杉林;总生长量、年凋落量、净生产量较高的是栎林、硬阔林,较低的是马尾松林、阔叶混交林和铁杉林,3种森林类型合计比例不到10%;在龄组中的分配依次为:中龄林>近熟林>成熟林>幼龄林>过熟林。在不同海拔中,梵净山森林植被生物量、碳储量、生长量、凋落量和净生产量主要分布在海拔1201—1800 m,其分布比例分别为50.39%、50.38%、49.21%、50.08%和49.54%;在不同坡向中,梵净山森林植被生物量、碳储量、生长量、凋落量和净生产量主要分布在南坡和北坡,二者合计比例大于60%。     

水处理用活性炭改性研究

利用锆和氯化十六烷基三甲铵共同改性活性炭,制备一种新型去除污水中硝酸盐和磷酸盐的水处理吸附剂,并考察吸附剂加量、反应温度、pH值、共存阴离子等影响因素对吸附效果的影响。结果表明:锆-氯化十六烷基三甲铵改性活性炭(Zr-CTAC-AC)吸附剂适用于硝酸盐和磷酸盐浓度在100mg/L以下的污水,随着Zr-CTAC-AC加量的增加,硝酸盐、磷酸盐去除率逐渐增加,单位吸附量逐渐下降,Zr-CTAC-AC加量为8g/L时,硝酸盐去除率为79%,Zr-CTAC-AC加量为4.0g/L时,磷酸盐去除率可达91%,但应在较低的pH值范围内使用;反应温度对Zr-CTAC-AC的吸附效果影响不大;共存Cl-、HCO3^-和SO4^2-可使硝酸盐的吸附率降低,但对磷酸盐吸附率影响较小;1mol/L NaCl溶液可使吸附到Zr-CTAC-AC表面的硝酸盐90.9%左右被解吸出来,1mol/L NaOH溶液可使吸附到Zr-CTAC-AC表面的磷酸盐78.4%左右被解吸出来。Zr-CTAC-AC能够有效去除污水中硝酸盐和磷酸盐,制备方法简单,且可循环利用,处理成本低。     

2016—2017年武汉市城区大气PM2.5污染特征及来源解析

利用2016年1月至2017年9月湖北省环境监测中心站大气复合污染自动监测站的在线监测数据，对武汉市城区PM_2.5的污染特征及主要来源进行解析。结果表明，武汉市城区PM_2.5质量浓度呈现出明显的季节差异，季节变化规律为冬季>春季>秋季>夏季。水溶性离子的主要成分SO₄^2-、NO₃^-和NH₄⁺占总离子质量浓度的82.0%。PM_2.5中阴离子相对阳离子较为亏损，颗粒整体呈碱性。夏季气态污染物的氧化程度较高且SO₂较NO₂氧化程度高。后向轨迹分析结果表明，区域传输是武汉市PM_2.5的一个重要来源，在4个典型重污染阶段，武汉市分别受到局地、东北、西北及西南方向气团传输的影响。PMF模型解析出武汉市PM_2.5五大主要来源及平均贡献率：扬尘22.0%、机动车排放27.7%、二次气溶胶21.6%、重油燃烧14.9%和生物质燃烧13.8%。     

Cumulative carbon emissions and economic policy: In search of general principles

We exploit recent advances in climate science to develop a physically consistent, yet surprisingly simple, model of climate policy. It seems that key economic models have greatly overestimated the delay between carbon emissions and warming, and ignored the saturation of carbon sinks that takes place when the atmospheric concentration of carbon dioxide rises. This has important implications for climate policy. If carbon emissions are abated, damages are avoided almost immediately. Therefore it is optimal to reduce emissions significantly in the near term and bring about a slow transition to optimal peak warming, even if optimal steady-state/peak warming is high. The optimal carbon price should start relatively high and grow relatively fast.