Evaluation of photolysis and hydrolysis of pyraclostrobin in aqueous solutions and its degradation products in paddy water

This study evaluated the hydrolysis and photolysis kinetics of pyraclostrobin in an aqueous solution using ultra-high-performance liquid chromatography–photodiode array detection and identified the resulting metabolites of pyraclostrobin by hydrolysis and photolysis in paddy water using high-resolution mass spectrometry coupled with liquid chromatography. The effect of solution pH, metal ions and surfactants on the hydrolysis of pyraclostrobin was explored. The hydrolysis half-lives of pyraclostrobin were 23.1–115.5?days and were stable in buffer solution at pH 5.0. The degradation rate of pyraclostrobin in an aqueous solution under sunlight was slower than that under UV photolysis reaction. The half-lives of pyraclostrobin in a buffer solution at pH 5.0, 7.0, 9.0 and in paddy water were less than 12?h under the two light irradiation types. The metabolites of the two processes were identified and compared to further understand the mechanisms underlying hydrolysis and photolysis of pyraclostrobin in natural water. The extracted ions obtained from paddy water were automatically annotated by Compound Discoverer software with manual confirmation of their fragments. Two metabolites were detected and identified in the pyraclostrobin hydrolysis, whereas three metabolites were detected and identified in the photolysis in paddy water.     

异戊醇低压热解的同步辐射真空紫外光电离质谱研究

作为新兴生物燃料,大分子醇类燃料在低压下的火灾安全基础迫切需要得到深入研究。热解过程作为火灾过程的初始阶段直接控制着火过程,火灾中碳烟颗粒的产生也依赖于热解反应,因此可燃物的低压热解研究在其低压火灾基础研究中具有重要意义。利用同步辐射真空紫外光电离质谱方法研究了异戊醇在0.2atm下的流动反应器热解,探测到了20余种热解产物,包括烯丙基自由基和C_4H_8O、C_5H_8、C_6H_6等同分异构体,并测量了其摩尔分数。基于实验结果,对燃料分解路径和主要产物的生成及消耗路径进行了探讨。与本组之前正戊醇热解实验的对比表明,由于存在支链结构,异戊醇在热解中比正戊醇更容易产生戊烯、丁烯和丙烯,但更少地产生乙烯。此外,异戊醇在热解中能够生成更多的丙炔和丙二烯等环状化合物前驱体,令其苯和1,3-环戊二烯的生成量更高,表明异戊醇比正戊醇更易于生成多环芳烃和碳烟。     

Economies of scale in global iron-making

In this paper, we investigate the presence of economies of scale in the global iron-making industry for integrated steel plants, iron making being the first stage in the steel-making process. Iron making depends on basic commodities, such as iron ore, coke and various forms of energy, required in the operation of the blast furnace, which can be classified as essential inputs and used in fixed proportions to produce iron. A generalized Leontief cost function is estimated using panel data for 69 integrated plants, such a specification being appropriate for technologies with essential inputs that are used in fixed proportions in production. A significant scale effect is observed due to the existence of fixed costs and a linear dependence of the cost function on production. Under a simple linear cost function, a rough estimate of the breakeven scale of plant, where costs equal revenue, is 4.5 Mt per year. Competitiveness, as measured by the ratio of plant average cost per tonne to best practice cost per tonne, can be shown to be positively related to the scale of production as well as the cost of essential inputs. Therefore, low-cost producers are also often producers with low raw material costs and production levels below the estimated breakeven scale of operation. Labor costs, although significant, are comparatively less important as a driver towards low costs.     

地下开采对地表的破坏与防治

介绍了由于地下开采而引起的沉陷对环境的破坏，包括连续下沉的移动盆地、非连续下沉的塌陷坑等。同时还介绍了对留设保护矿柱、充填采空区等预防措施。对塌陷区和裂缝的治理、复地造田等方法进行了探讨。     

污泥加热预处理对中温厌氧消化的影响

对污泥加热预处理给中温厌氧混合消化和污泥单独消化带来的影响进行了研究.研究结果表明,污泥加热预处理有利于提高混合消化对 COD 的去除率,尤其是 SCOD 的去除率由 77%增长到 93%,但不利于 TS 和 VS 的去除;而对污泥单独消化,预处理则不利于有机物的去除.采用加热预处理后的污泥进样,混合消化和污泥单独消化的甲烷产气量均有所提高.     

中国经济的“阿基米德支点”

资源是经济发展的“阿基米德支点”：世界十大经济国每年能源的生产占全球的６２．１％，消费为７１．０％。重要矿产资源的生产多排在世界前１０名生产国之，外面是消费则多排在１０名之内，且对这些矿产资源的消费量多在９５％以上。     

供水管网生物膜有机物的二氯乙腈与二氯乙酰胺生成特性

在饮用水输配系统中,来源于管壁生物膜的有机物可能耗氯并生成消毒副产物(DBPs),包括二氯乙腈(DCAN)与二氯乙酰胺(DCAcAm)等高毒性含氮DBPs(N-DBPs).研究考察管网常见的细菌与其胞外聚合物(EPS)以及模拟管壁生物膜氯化与氯胺化后DCAN与DCAcAm的生成,并与天然有机物(NOM)和水源水有机物进行比较.结果显示,铜绿假单胞菌、恶臭假单胞菌与藤黄微球菌与氯反应生成的DCAN、DCAcAm浓度分别为1.48～2.02、0.21～0.38μg·mg~(-1)(mg~(-1)以TOC计),高于同反应条件下NOM的生成量;相比于氯化反应,3株细菌细胞氯胺化生成的DCAN与DCAcAm浓度明显更低.3株菌的EPS也是氯与氯胺化反应生成DCAN与DCAcAm的前体物,且其氯胺化反应生成的DCAcAm浓度高于氯化反应生成的.与NOM、水源水相比,模拟管壁生物膜氯化后生成的N-DBPs与三氯甲烷(TCM)浓度比更高,表明生物膜有机物比NOM与水源水有机物更倾向生成DCAN与DCAcAm类N-DBPs,且模拟管壁生物膜氯胺化的DCAcAm生成量高于氯化反应的,说明管壁生物膜有机物是供水管网系统中DCAN与DCAcAm类N-DBPs的重要前体物.     

臭氧耦合陶瓷膜过滤对膜性能及出水消毒副产物的影响

利用臭氧（O₃）-陶瓷膜过滤（CMF）处理常规工艺出水,研究了不同O₃-CMF耦合方式对膜性能和消毒副产物（DBPs）的影响.结果表明,与单独CMF相比,异位O₃-CMF和原位O₃-CMF均可以有效缓解膜污染,原位O₃-CMF控制效果最佳.异位O₃-CMF对进水（常规工艺出水） DOC去除率（26.25%）略高于原位O₃-CMF（22.31%）,但是其SUVA去除率（83.91%）明显低于原位O₃-CMF（93.10%）.羟基自由基（·OH）生成特征表明原位O₃-CMF可促进O₃产生更多的·OH.在O₃、·OH氧化和陶瓷膜截留协同作用下,异位O₃-CMF和原位O₃-CMF出水中总荧光响应强度和相对分子质量大于0.3×10³,有机物含量降低,进而使得出水中含碳消毒副产物（C-DBPs）生成量分别降低了21.86%和32.35%,含氮消毒副产物（N-DBPs）生成量分别降低了16.16%和19.13%.但O₃和·OH氧化后生成的小分子有机物因难以被CM截留导致其在出水中含量增加,进而增加了卤代酮（HKs）、水合氯醛（CH）和三卤硝基甲烷（THNMs）的产生.本研究对于不同O₃-CMF方式下O₃与CM的协同机制的探讨,改善膜性能和提升DBPs前体物的去除具有一定指导意义.     

基于卫星遥感气溶胶产品评估体系的气溶胶时空分布及变化趋势表征

卫星遥感气溶胶虽然空间覆盖度高,但不同产品数据在准确性和适用性上存在显著差异.为了能够科学定量的衡量各个产品的优劣,选择最合适的气溶胶产品,该研究以数学统计为基础,提出了一种卫星遥感气溶胶产品评估体系,并依此确定了全球6个人口密集地区的最优卫星数据集,在此基础上开展了近10年的（2009—2018）气溶胶时空变化分析.结果表明暗像元算法在植被覆盖度高的地区表现最好,深蓝算法在亮地表的沙漠干旱地区更占优势,而暗像元-深蓝融合算法在土地类型复杂且气溶胶来源多变时得以突出.人口密集的6个区域中,除了区域A和区域B,其它地区的大气污染水平整体偏高.其中,A、B、E的气溶胶负荷呈下降变化,区域F基本不变,其余区域上升变化.评估体系的建立为气溶胶遥感产品的选取提供了新的衡量方法,且该文关于气溶胶时空分布及变化的分析可以为区域性气溶胶研究提供一定的参考价值.