Preparation and performance of novel APP/NaY–Fe suppressant for coal dust explosion

Coal dust explosion occurs easily in the coal chemical industry. To ensure safety in industrial production, NaY zeolite was used as carrier modified with Fe ions and combined with ammonium polyphosphate (APP) to prepare a novel composite suppressant for coal dust explosion. The explosion suppression performance of novel APP/NaY–Fe suppressant was investigated by flame propagation inhibition experiments. The results show that Fe ion modification can effectively improve the explosion suppression performance. By increasing content, the explosion suppression performance of the explosion suppressant increases. The maximum explosion pressure P_max of coal dust drops to 0.13 MPa when 50 wt% explosion suppressants were added, and the coal dust explosion cannot continue to expand. Complete suppression of explosion could be achieved by adding 66 wt% explosion suppressants. Combined with XRD, SEM and TG results, the explosion suppression mechanism was proposed. The novel explosion suppressant has high thermal stability, good dispersity and its explosion suppression components distribute uniformly. It shows good explosion suppression performance by the synergistic effect among explosion-suppression components.     

水平管内不同煤质煤尘爆炸火焰传播特性实验研究

为研究水平管道空间不同煤质煤尘爆炸火焰传播特性，选取褐煤、长焰煤、不粘煤、气煤4种煤尘，对爆炸火焰焰峰特性、火焰加速传播特性、火焰传播距离与持续时间展开研究。研究结果表明:褐煤在500 ms内焰峰的形状由尖锐向平滑再向钝化不断演变，长焰煤与不粘煤在375 ms时焰峰前端出现明显焰体分离现象，分析认为这与管体冷壁效应、空间尺度效应及空间氧气消耗直接相关；气煤在375 ms时焰峰出现大面积火焰碎纹，说明气煤爆炸火焰猛烈传播的持续时间相对较短，整体爆炸强度相对较弱；褐煤与长焰煤爆炸火焰存在2次间断性加速，分析认为这与管体空间受限、常温管壁散热、局部助燃氧气瞬间不足等因素有关；褐煤在爆炸后400～600 ms内火焰2次加速完全，火焰传播距离达740 mm，明显大于长焰煤、不粘煤与气煤，说明低变质褐煤爆炸火焰持续时间更长，火焰传播距离更远且传播更剧烈；虽然气煤火焰最远传播距离比长焰煤大30 mm，但由于气煤火焰在375 ms左右出现大片火焰碎纹，因此气煤整体的爆炸强度小于长焰煤。     

2013年苏州春季一次重污染天气的过程分析

研究了2013年3月在江苏范围内的一次重污染天气过程，重点分析苏州在此次污染过程中大气污染的变化特征。污染过程中，苏州市颗粒物浓度上升较为明显， PM10的小时质量浓度最高达548μg／m3， PM2．5质量浓度也达到197μg／m3，污染持续时间为2 d，3月8—9日当地空气质量均达到中度污染水平。根据后向轨迹模型、颗粒物离子浓度的分析，此次污染是由外来浮尘及苏州本地污染物排放所造成的区域霾污染影响所致。根据监测结果与实际污染特征，针对性地提出了对策和措施。     

Collecting representative dust samples: A comparison of various sampling methods in underground coal mines

Former methods used in the U.S. to assess hazardous and explosible coal dust date back to the 1950s. As mining technologies advanced, so too have the hazards. Given the results of the recent coal dust particle size survey and full-scale experimental mine explosion tests, the National Institute for Occupational Safety and Health (NIOSH) recommended a new minimum standard, in the absence of background methane, of 80% total incombustible content (TIC) be required in the intake airways of bituminous coal mines, replacing the previous 65% TIC requirement. Most important to monitoring and maintaining the 80% TIC is the ability to effectively collect and analyze representative dust samples that would likely disperse and participate in dust explosion propagation. Research has shown that dust suspended on elevated surfaces is usually finer, more reactive, and more readily dispersible while floor deposits of dust are generally coarser and more difficult to disperse given the same blast of air. The roof, rib, and floor portions of the dust samples were collected and analyzed for incombustible content separately and the results were compared to a band sample of the roof, rib, and floor components. Results indicate that the roof and rib dust samples should be kept separate from floor dust samples and considered individually for analyses. The various experimental collection methods are detailed along with preferred sampling approaches that improve the detectability of potentially hazardous accumulations of explosible dust.     

室内空气和灰尘中全(多)氟烷基化合物的研究进展

全(多)氟烷基化合物(per(poly)fluoroalkyl substances,PFASs)在环境各个介质及人体样品中广泛被检出,近年,在室内空气和灰尘中也普遍发现PFASs.研究表明,室内空气中PFASs的含量普遍高于室外空气,室内空气和灰尘中的PFASs可能是室外空气的污染来源及人体暴露源,因此室内环境中PFASs成为环境领域的又一个研究热点.但目前为止,我国还没有开展室内空气中PFASs的相关研究,室内灰尘中PFASs的研究也相对较少.本文就室内空气和灰尘中PFASs的采样与分析方法、污染现状、来源分析及人体暴露等4个方面进行了综合阐述,以期为我国室内环境中PFASs的研究提供参考.     

Hybrid H2/Al dust explosions in Siwek sphere

Explosion indices and explosion behaviour of Al dust/H₂/air mixtures were studied using standard 20 l sphere. The study was motivated by an explosion hazard occurring at some accidental scenarios considered now in ITER design (International Thermonuclear Experimental Reactor). During Loss-of-Vacuum or Loss-of-Coolant Accidents (LOCA/LOVA) it is possible to form inside the ITER vacuum vessel an explosible atmosphere containing fine Be or W dusts and hydrogen. To approach the Be/H₂ explosion problem, Be dust is substituted in this study by aluminium, because of high toxicity of Be dusts. The tested dust concentrations were 100, 200, 400, 800, and 1200 g/m3; hydrogen concentrations varied from 8 to 20 vol. % with 2% step. The mixtures were ignited by a weak electric spark. Pressure evolutions were recorded during the mixture explosions. In addition, the gaseous compositions of the combustion products were measured by a quadruple mass-spectrometer. The dust was involved in the explosion process at all hydrogen and dust concentrations even at the combination ‘8%/100 g/m3’. In all the other tests the explosion overpressures and the pressure rise rates were noticeably higher than those relevant to pure H₂/air mixtures and pure Al dust/air mixtures. At lower hybrid fuel concentrations the mixture exploded in two steps: first hydrogen explosion followed by a clearly separated Al dust explosion. With rising concentrations, the two-phase explosion regime transits to a single-phase regime where the two fuel components exploded together as a single fuel. In this regime both the hybrid explosion pressures and pressure rise rates are higher than either H₂ or Al ones. The two fuels compete for the oxygen; the higher the dust concentration, the more part of O2 it consumes (and the more H₂ remains in the combustion products). The test results are used to support DUST3D CFD code developed at KIT to model LOCA or LOVA scenarios in ITER.     

铝粉爆炸无火焰泄压技术及装备研究

为有效防止粉尘爆炸泄爆引起的二次爆炸及火灾问题，基于泄压理论、消火机理，设计开发无火焰泄压装置，装置主要由消火结构、底座、爆破片及夹持机构组成，消火结构由不锈钢金属丝网组成。选择铝粉尘为测试粉尘，通过自建除尘系统试验平台进行试验研究。结果表明:无火焰泄压装置可成功阻止火焰传播，装置释放的冲击波在5 m外均小于5 kPa，除尘系统内部最大泄爆压力为0.1 MPa，装置前端火焰传播速度均大于100 m/s。     

TSLCDM长袋低压脉冲布袋除尘器及其应用

为了使电炉烟气治理过程中污染源的排放达到国家排放标准,提出一种TSLCDM长袋低压脉冲除尘器(简称TSLCDM除尘器)。通过对该除尘器结构、除尘原理以及不同工况下除尘效率和过滤阻力的分析,得到该除尘器的除尘效率>99.9%,压力损失<1200 Pa,最终排出的烟气含尘质量浓度约5.54 mg/m3,满足了国家的超低排放要求,以泉州某公司电炉项目除尘系统为研究对象,证明了该新型脉冲布袋除尘器在电炉烟气治理除尘系统的应用效果,具有很好的经济和环境效益。     

基于多孔环形喷嘴的可燃爆粉尘分散特征的密度效应研究*

为了研究不同密度的可燃爆粉尘在内置多孔环形喷嘴的20 L爆炸特性测试装置中的分散特征，基于负载粒子流方法、耦合DPM动量平衡方程和时间平均 Navier Stokes控制方程组，实现3种不同密度的煤粉、铝粉和锆粉在20 L爆炸测试装置中粉尘分散全过程的数值模拟。研究结果表明:多孔环形喷嘴的分散较为均匀，但是约束管道末端存在局部粉尘残留区，致使爆炸仓内真实粉尘浓度远低于形式浓度；爆炸仓中心位置的最大湍动能随着粉尘密度的增加而减小，只有显著地变化粉尘密度才能展示区分度较高的浓度峰值和抵达浓度峰值的时间。     

Inhibiting effects by Fe2O3 on combustion and explosion characteristics of ABS resin

The global increase in the use of, and reliance on, plastics has prompted the demand for acrylonitrile-butadiene-styrene (ABS) resin in various fields. With this increased requirement, numerous failures have occurred in the ABS process. Those incidents, resulting from electrostatic discharge, powder accumulation, heat accumulation, construction sparks, and plant fires, have caused dust fire and explosions.In this study, the ABS resin was gleaned from the site and tested for its explosion parameters, including minimum ignition temperature of dust cloud (MIT_C), minimum ignition energy (MIE), and minimum explosion concentration (MEC). To improve loss prevention in the manufacturing process, ferric oxide (Fe₂O₃) as an inert additive was added in the ABS powder. According to the MIE test, Fe₂O₃ has an apparent inhibiting effect on dust explosion for the ABS dust. With the proportion of Fe₂O₃ increased from 25 to 50 mass% in ABS, the MIE increased from 67 to 540 mJ. The explosion tests via 20-L apparatus indicated that Fe₂O₃ mixed with ABS could not increase the MEC significantly. However, the explosion pressure dropped by increasing in the ratio of Fe₂O₃ in ABS. This inerting strategy of ABS was deemed to substantially lessen the probability and severity of fire and explosion.