具有变频器的矿井低压漏电保护研究

为了解决移动变电站低压侧为变频器供电时漏电保护装置误动的问题，提出了基于傅式算法的附加直流原理漏电保护新方法。通过理论分析和MATLAB/Simulink仿真，研究了具有变频器的矿井低压供电系统附加直流原理漏电保护，提出由傅式算法分解出采样电压直流分量以反映电缆绝缘水平的保护方法；同时分析了其他因素对直流分量的影响。研究结果表明:变频器对传统附加直流保护整定值有较大影响，易造成漏电保护装置误动且无法实现电缆的在线绝缘监测；所提出的直流分量法能准确测量电缆对地绝缘电阻，且可消除电缆分布电容、变频器载波频率、变频器输出频率等其他因素的干扰；采用该漏电保护方法，可承受变频器投入时对采样电压造成的较大冲击，不必在启动期间解除漏电保护装置，能够消除在此期间存在的人身触电安全隐患。     

典型电脱盐废水预处理技术及其应用

针对原油电脱盐废水处理形势日益严峻的问题,介绍了电脱盐废水预处理技术的研究及应用进展,分析了电脱盐废水预处理技术的原理、特点及应用效果,总结了影响电脱盐废水特点的主要因素,指出改进原油开采技术、提高电脱盐装置的运行和管理水平可从源头上改善电脱盐废水水质,进一步开发和应用先进技术对控制电脱盐废水污染具有积极意义。     

燃机电厂噪声模拟时SoundPLAN声源模型的简化

燃机电厂一般靠近用电负荷或城镇建设，为了有效地控制噪声，在燃机电厂项目的设计、环评等阶段对其噪声影响进行合理的模拟从而提出相应的降噪方案是非常必要的。结合国家标准，对燃机电厂的敏感目标和主要噪声的声源特性进行了总结。通过对比声源类型、中心频率的设置对模拟结果产生的影响，探讨了在应用SoundP-LAN软件对燃机电厂的噪声模拟时如何简化设置声源模型的问题，为今后的噪声模拟评估工作提供参考。     

Road traffic injuries among riders of electric bike/electric moped in southern China

Objective: Electric bike/moped-related road traffic injuries have become a burgeoning public health problem in China. The objective of this study was to identify the prevalence and potential risk factors of electric bike/moped-related road traffic injuries among electric bike/moped riders in southern China.

Methods: A cross-sectional study was used to interview 3,151 electric bike/moped riders in southern China. Electric bike/moped-related road traffic injuries that occurred from July 2014 to June 2015 were investigated. Data were collected by face-to-face interviews and analyzed between July 2015 and June 2017.

Results: The prevalence of electric bike/moped-related road traffic injuries among the investigated riders was 15.99%. Electric bike/moped-related road traffic injuries were significantly associated with category of electric bike (adjusted odds ratio [AOR] = 1.36, 95% confidence interval [CI], 1.01–1.82), self-reported confusion (AOR = 1.77, 95% CI, 1.13–2.78), history of crashes (AOR = 6.14, 95% CI, 4.68–8.07), running red lights (AOR = 3.57, 95% CI, 2.42–5.25), carrying children while riding (AOR = 1.96, 95% CI, 1.37–2.85), carrying adults while riding (AOR = 1.68, 95% CI, 1.23–2.28), riding in the motor lane (AOR = 2.42, 95% CI, 1.05–3.93), and riding in the wrong traffic direction (AOR = 1.63, 95% CI, 1.13–2.35). In over 77.58% of electric bike/moped-related road traffic crashes, riders were determined by the police to be responsible for the crash. Major crash-causing factors included violating traffic signals or signs, careless riding, speeding, and riding in the wrong lane.

Conclusion: Traffic safety related to electric bikes/moped is becoming more problematic with growing popularity compared with other 2-wheeled vehicles. Programs need to be developed to prevent electric bike/moped-related road traffic injuries in this emerging country.     

TSLCDM长袋低压脉冲布袋除尘器及其应用

为了使电炉烟气治理过程中污染源的排放达到国家排放标准,提出一种TSLCDM长袋低压脉冲除尘器(简称TSLCDM除尘器)。通过对该除尘器结构、除尘原理以及不同工况下除尘效率和过滤阻力的分析,得到该除尘器的除尘效率>99.9%,压力损失<1200 Pa,最终排出的烟气含尘质量浓度约5.54 mg/m3,满足了国家的超低排放要求,以泉州某公司电炉项目除尘系统为研究对象,证明了该新型脉冲布袋除尘器在电炉烟气治理除尘系统的应用效果,具有很好的经济和环境效益。     

地面爆燃式电打火装置在火炬上的应用

介绍了地面爆燃式电打火装置的结构及安装要点,实践表明该装置点火效率高、故障率低、便于检修,非常适合石油化工行业的火炬打火系统。     

发达国家电力产业发展循环经济的经验

电力产业大力发展循环经济,对国家经济持续稳定的增长具有基础性、关键性、长期性的作用。详细介绍了发达国家电力产业在减少排放、控制污染、提高发电效率、推行清洁生产、探索建立循环经济工业园区及发展可再生能源发电等方面的经验和做法,为我国电力产业大力发展循环经济提供良好借鉴。     

电动交通工具的污染减排及对策

燃油交通工具是城市温室气体的重要来源之一,因此使用电动交通工具成为解决城市污染减排的重要措施.文章就正确认识电动交通工具污染减排的作用,蓄电池的生产管理、回收利用等进行了讨论,并提出了相应的对策和建议.     

基于故障树分析法研究变电站检修触电事故防控

对变电站检修工作人员触电事故进行了故障树分析,通过定性分析,得出最小割集和结构重要度,并提出变电站检修触电事故的预防控制措施。     

电动增压补气消除柴油机瞬态加速冒烟的试验

将自行开发的、适用车载24V电源的电动增压补气系统在一台490QDI柴油机上进行了实验研究.实验工况包括起始负荷分别为0和40N.m的加载加速的瞬态工况以及1400r·min-1、60N·m,1600 r·min-1、90N-m和1800 r.min-1、120N·m 3种低转速、大扭矩稳态工况,针对以上工况分别进行了有无电动增压补气的实验.试验结果表明,有电动增压补气的柴油机同原机相比,零负荷加载加速时的微粒排放降低达70%以上,瞬间输出功率最大可提高54.5%;在稳态工况时,HC、CO排放都随着电机转速的升高而降低,最大减少量分别达到66.7%和75.O%;波许烟度平均减小50%以上.此外,加速补气对提高燃油经济性也有一定效果,比油耗最大能降低7.46%.