Catalytic degradation of toxic organic dye using an aluminum-doped Cu0.4Zn0.6-xAlxFe2O4 (x = 0.0, 0.2, 0.4, 0.6) spinel ferrite in a photo-Fenton system

Catalytic activity of spinel ferrite in breaking down toxic dye materials are promising due to their uniqueness. In this study, aluminum-doped copper zinc ferrite, Cu_0.4Zn_0.6-xAl_xFe₂O₄ (x = 0.0, 0.2, 0.4, 0.6), a catalyst for toxic dye degradation is synthesized through chemical co-precipitation route. The formation of the spinel ferrite catalyst is initially confirmed by Fourier transform infrared spectra, which shows the frequency of metal-oxygen bond vibration at 539 and 427 cm⁻¹ attributed to the tetrahedral and octahedral sites respectively. Higher intensity sharp peak of X-ray diffraction for (311) plane is the evidence for the phase purity and the formation of spinel ferrite. The crystallite size is found to decrease with the increase of Al³⁺ ion. The surface structure of the obtained particles is investigated using a scanning electron microscope. Analyses of the material's magnetic characteristics using a vibrating sample magnetometer (VSM) revealed that it is, in fact, a soft magnet, as evidenced by the loop of its hysteresis, which is narrow. The catalytic degradation of methylene blue dye under the mechanism of the photo-Fenton process is studied with the obtained spinel ferrites and the result is found to be as high as 96.5%. The process follows pseudo-second order kinetics and the Langmuir isotherm.     

具有变频器的矿井低压漏电保护研究

为了解决移动变电站低压侧为变频器供电时漏电保护装置误动的问题，提出了基于傅式算法的附加直流原理漏电保护新方法。通过理论分析和MATLAB/Simulink仿真，研究了具有变频器的矿井低压供电系统附加直流原理漏电保护，提出由傅式算法分解出采样电压直流分量以反映电缆绝缘水平的保护方法；同时分析了其他因素对直流分量的影响。研究结果表明:变频器对传统附加直流保护整定值有较大影响，易造成漏电保护装置误动且无法实现电缆的在线绝缘监测；所提出的直流分量法能准确测量电缆对地绝缘电阻，且可消除电缆分布电容、变频器载波频率、变频器输出频率等其他因素的干扰；采用该漏电保护方法，可承受变频器投入时对采样电压造成的较大冲击，不必在启动期间解除漏电保护装置，能够消除在此期间存在的人身触电安全隐患。     

典型电脱盐废水预处理技术及其应用

针对原油电脱盐废水处理形势日益严峻的问题,介绍了电脱盐废水预处理技术的研究及应用进展,分析了电脱盐废水预处理技术的原理、特点及应用效果,总结了影响电脱盐废水特点的主要因素,指出改进原油开采技术、提高电脱盐装置的运行和管理水平可从源头上改善电脱盐废水水质,进一步开发和应用先进技术对控制电脱盐废水污染具有积极意义。     

燃机电厂噪声模拟时SoundPLAN声源模型的简化

燃机电厂一般靠近用电负荷或城镇建设，为了有效地控制噪声，在燃机电厂项目的设计、环评等阶段对其噪声影响进行合理的模拟从而提出相应的降噪方案是非常必要的。结合国家标准，对燃机电厂的敏感目标和主要噪声的声源特性进行了总结。通过对比声源类型、中心频率的设置对模拟结果产生的影响，探讨了在应用SoundP-LAN软件对燃机电厂的噪声模拟时如何简化设置声源模型的问题，为今后的噪声模拟评估工作提供参考。     

Road traffic injuries among riders of electric bike/electric moped in southern China

Objective: Electric bike/moped-related road traffic injuries have become a burgeoning public health problem in China. The objective of this study was to identify the prevalence and potential risk factors of electric bike/moped-related road traffic injuries among electric bike/moped riders in southern China.

Methods: A cross-sectional study was used to interview 3,151 electric bike/moped riders in southern China. Electric bike/moped-related road traffic injuries that occurred from July 2014 to June 2015 were investigated. Data were collected by face-to-face interviews and analyzed between July 2015 and June 2017.

Results: The prevalence of electric bike/moped-related road traffic injuries among the investigated riders was 15.99%. Electric bike/moped-related road traffic injuries were significantly associated with category of electric bike (adjusted odds ratio [AOR] = 1.36, 95% confidence interval [CI], 1.01–1.82), self-reported confusion (AOR = 1.77, 95% CI, 1.13–2.78), history of crashes (AOR = 6.14, 95% CI, 4.68–8.07), running red lights (AOR = 3.57, 95% CI, 2.42–5.25), carrying children while riding (AOR = 1.96, 95% CI, 1.37–2.85), carrying adults while riding (AOR = 1.68, 95% CI, 1.23–2.28), riding in the motor lane (AOR = 2.42, 95% CI, 1.05–3.93), and riding in the wrong traffic direction (AOR = 1.63, 95% CI, 1.13–2.35). In over 77.58% of electric bike/moped-related road traffic crashes, riders were determined by the police to be responsible for the crash. Major crash-causing factors included violating traffic signals or signs, careless riding, speeding, and riding in the wrong lane.

Conclusion: Traffic safety related to electric bikes/moped is becoming more problematic with growing popularity compared with other 2-wheeled vehicles. Programs need to be developed to prevent electric bike/moped-related road traffic injuries in this emerging country.     

TSLCDM长袋低压脉冲布袋除尘器及其应用

为了使电炉烟气治理过程中污染源的排放达到国家排放标准,提出一种TSLCDM长袋低压脉冲除尘器(简称TSLCDM除尘器)。通过对该除尘器结构、除尘原理以及不同工况下除尘效率和过滤阻力的分析,得到该除尘器的除尘效率>99.9%,压力损失<1200 Pa,最终排出的烟气含尘质量浓度约5.54 mg/m3,满足了国家的超低排放要求,以泉州某公司电炉项目除尘系统为研究对象,证明了该新型脉冲布袋除尘器在电炉烟气治理除尘系统的应用效果,具有很好的经济和环境效益。     

地面爆燃式电打火装置在火炬上的应用

介绍了地面爆燃式电打火装置的结构及安装要点,实践表明该装置点火效率高、故障率低、便于检修,非常适合石油化工行业的火炬打火系统。     

光助非均相芬顿体系中羟基自由基的荧光光谱法测定与影响因素研究

以TiO2/Al2O3为载体制备了Fe2O3/TiO2/Al2O3催化剂,建立了三相流化床光助非均相芬顿反应体系.选取香豆素为羟基自由基捕获剂,采用荧光法检测光助非均相芬顿反应体系中产生的活性中间体,发现在体系中有高活性的羟基自由基生成.实验讨论了溶液的pH值、H2O2投加量、催化剂投加量、光强对光助非均相芬顿反应体系中羟基自由基生成量的影响.结果表明,以香豆素为羟基自由基捕获剂的实验方法可以较好地检测不同实验条件下光助非均相芬顿反应体系中产生的羟基自由基,且该光助非均相芬顿反应体系中羟基自由基的生成在30 min内符合零级反应动力学.溶液的pH值、H2O2投加量、催化剂投加量、光强均对反应体系中羟基自由基的生成存在一定的影响.     

发达国家电力产业发展循环经济的经验

电力产业大力发展循环经济,对国家经济持续稳定的增长具有基础性、关键性、长期性的作用。详细介绍了发达国家电力产业在减少排放、控制污染、提高发电效率、推行清洁生产、探索建立循环经济工业园区及发展可再生能源发电等方面的经验和做法,为我国电力产业大力发展循环经济提供良好借鉴。     

光助-Fenton法处理均酐生产废水的实验研究

采用光助-Fenton处理均苯四甲酸二酐生产废水。以废水的TOC去除率为指标,通过单因素试验和正交试验,对影响光助-Fenton的因素进行分析。结果表明:室温下,在反应初始pH=3.5,[H2O2]=12mmol/L,[Fe2+]=1.5mmol/L,反应时间为80min,光源为500W汞灯的条件下,TOC的去除率NN达到76%。