Environmental life cycle assessment of different types of the municipal wastewater pipeline network

With the onset of social life, humans have considered waste disposal as essential, and they have been able to repel it through brick and clay channels. Checking sewage pipes for energy consumption and a longer lifetime than other sewage system components is important. Climate change and exploitation of industrial resources have made environmental impacts, which are important factors in decision making. The purpose of this study was to introduce the most suitable type of sewage pipe considering environmental protection. Therefore, we applied the environmental life cycle assessment (LCA) method, using Sima Pro 8.2.3 software for the one-kilometer length of concrete pipes (300 mm in diameter), Polyvinyl chloride (PVC), and polyethylene (PE) (315 mm in diameter). Also, the BEES method and sensitivity analysis were used to validate the results. The comparison between three types of municipal wastewater pipes indicated that PE pipes are a more environmentally friendly option than PVC, and concrete pipes in pipe recycling, reducing extraction from untapped resources, and inefficient extraction of resources. Electricity, diesel fuel, and sulfate resistance cement consumption for concrete production are the most pollution elements in the LCA of concrete pipes. Usage of PVC granular, sanitary landfill of PVC pipes, and using hydraulic drill in LCA of PVC pipes are the most elements of generating pollution. The usage of PE granules, PE pipes landfilling, hydraulic excavator, and electricity consumption in the LCA of the PE pipes are the greatest polluting parameters.     

A proactive process risk assessment approach based on job hazard analysis and resilient engineering

Complex systems often experience a long period of incubation before accidents occur. Therefore, a proactive risk assessment is essential for process safety. The conventional job hazard analysis (JHA) method has been an effective tool to conduct a process risk assessment in the high-risk industrial field. However, the conventional JHA is inadequate for the proactive risk assessment since it is usually conducted during and before one specific operation process. Operations such as startup and maintenance are performed repeatedly on the lifecycle of a plant. Therefore, the risk reduction measures for the industrial process should include not only preventive actions obtained from the conventional JHA but also recovery ones. Resilience engineering (RE) has proven to be helpful for the recovery analysis of a complex system. The objective of this paper is to propose a proactive and comprehensive process risk assessment approach based on JHA and RE. The mechanism of applying RE to address operation process risk is illustrated. The integrated approach can provide guidelines to establish proactive risk reduction measures as well as maintain a low-risk level. Finally, a gas transmission startup process risk assessment case is presented to demonstrate its applicability.     

Toward harmonizing prospective effectiveness assessment for road safety: Comparing tools in standard test case simulations

Abstract

Objective: With the overall goal to harmonize prospective effectiveness assessment of active safety systems, the specific objective of this study is to identify and evaluate sources of variation in virtual precrash simulations and to suggest topics for harmonization resulting in increased comparability and thus trustworthiness of virtual simulation-based prospective effectiveness assessment.

Methods: A round-robin assessment of the effectiveness of advanced driver assistance systems was performed using an array of state-of-the-art virtual simulation tools on a set of standard test cases. The results were analyzed to examine reasons for deviations in order to identify and assess aspects that need to be harmonized and standardized. Deviations between results calculated by independent engineering teams using their own tools should be minimized if the research question is precisely formulated regarding input data, models, and postprocessing steps.

Results: Two groups of sources of variations were identified; one group (mostly related to the implementation of the system under test) can be eliminated by using a more accurately formulated research question, whereas the other group highlights further harmonization needs because it addresses specific differences in simulation tool setups. Time-to-collision calculations, vehicle dynamics, especially braking behavior, and hit-point position specification were found to be the main sources of variation.

Conclusions: The study identified variations that can arise from the use of different simulation setups in assessment of the effectiveness of active safety systems. The research presented is a first of its kind and provides significant input to the overall goal of harmonization by identifying specific items for standardization. Future activities aim at further specification of methods for prospective assessments of the effectiveness of active safety, which will enhance comparability and trustworthiness in this kind of studies and thus contribute to increased traffic safety.     

基于TVR的腐蚀油气管道失效概率及安全寿命研究

为避免因腐蚀导致油气管道失效，针对因管道特性和腐蚀尺寸的不确定性使得管道剩余强度成为概率模型的特点，建立了腐蚀管道强度损失随机模型；借助可靠性理论，通过分析管道腐蚀进程的时变性特点，将管道系统由损伤积累和抗力衰减导致的剩余强度随机化；提出基于穿越率的腐蚀油气管道失效评定及安全寿命预测方法。研究结果表明:腐蚀速率和运行压力对管道失效概率及安全寿命影响显著,管道尺寸影响适中，而相关系数和拉伸强度影响较小；若腐蚀速率Va=0.2 mm/a，VL=10 mm/a或局部腐蚀缺陷半径达到管道壁厚的0.5倍时，建议作为重点风险段监测并检修。所建方法是对腐蚀油气管道运营监控和风险评估的有益补充。     

工业废水毒性评估与致毒物质鉴别技术进展

综述了工业废水毒性的化学评估方法、生物毒性评估方法、毒性鉴定评估(TIE)程序以及效应引导的毒物鉴别分析(EDA)中污染物提取、分离、毒性测试、致毒物质识别等技术。指出,工业废水毒害风险评估方法正逐渐向化学分析与生物毒性测试相结合的关键致毒物质鉴别方法转变,便捷、高通量是致毒物质鉴别技术的发展方向,质谱技术及替代定性监测技术的发展将提供更为准确、便捷的致毒物质鉴别方法,为工业废水潜在风险防控提供依据。     

Fast,cheap, and imperfect? US public opinion about solar geoengineering

ABSTRACT

Solar geoengineering, which seeks to cool the planet by reflecting a small fraction of sunlight back into space, has drawn the attention of scientists and policymakers as climate change remains unabated. Unlike mitigation, solar geoengineering could quickly and cheaply lower global temperatures. It is also imperfect. Its environmental impacts remain unpredictable, and its low cost and immediate effects may result in ‘moral hazard,’ potentially crowding out costly mitigation efforts. There is little understanding about how the public will respond to such tradeoffs. To address this, a 1000-subject nationally representative poll focused on solar geoengineering was conducted as part of the Cooperative Congressional Election Study (CCES) of the US electorate in October–November 2016. The importance that individuals place on solar geoengineering’s speed and cost predicts their support for it, but there is little to no relationship between their concerns about its shortcomings and support for its research and use. Acquiescence bias appears to be an important factor for attitudes around solar geoengineering and moral hazard.     

沼泽湿地水生无脊椎动物完整性指数构建与健康评价

依据2017年5、7、9月对三江平原19处沼泽湿地(参照湿地6处,受损湿地13处)的水生无脊椎动物采样结果,应用生物完整性理论和方法,构建水生无脊椎动物完整性指数,评价三江平原沼泽湿地健康状况。通过对27个候选指标的分布范围、判别能力和相关性分析,筛选出总分类单元数、扁卷螺科百分比、龙虱科百分比、刮食者百分比4个指标构成水生无脊椎动物完整性指数核心指标。采用比值法计算各指标参数值,将各参数值加和得到水生无脊椎动物完整性指数值。根据参照湿地水生无脊椎动物完整性指数值的25%分位数值确定评价标准,对小于25%分位数的值进行三等分,确定三江平原沼泽湿地健康评价标准:≥2.58,无干扰;1.72～2.58,轻度干扰;0.86～1.72,中度干扰;0～0.86,重度干扰。结果表明:所调查的三江平原沼泽湿地有78.95%受到不同程度的干扰(其中47.37%受到了中重度干扰),21.05%属于无干扰。     

交通干道沿线土壤重金属监测与评估综述

公路运营所带来的铅、镉、锌等重金属污染物对人体健康安全存在着潜在和长期的影响。近年来,开展交通干道沿线重金属污染监测与评估工作已经成为环境监测工作的重要内容。从监测技术、评估方法、可能影响因素等几个方面对该领域的研究进展及成果进行了综述。采样段面的选取、点位的布设与样品的收集应该同时遵循全面性和代表性的原则。在同一交通干道内,均匀布置采样段面的同时可以尽量包含高车流量、中车流量与低车流量3种类型。考虑到重金属在横向距离上的分布规律,可以在0~100 m处设置密集采样点位,在100~300 m处设置适量采样点位。评估方法一般同时采用Kriging空间插值分析、污染指数分析、多元统计分析,生态风险评价与健康风险评价等多种分析方法。     

Collecting representative dust samples: A comparison of various sampling methods in underground coal mines

Former methods used in the U.S. to assess hazardous and explosible coal dust date back to the 1950s. As mining technologies advanced, so too have the hazards. Given the results of the recent coal dust particle size survey and full-scale experimental mine explosion tests, the National Institute for Occupational Safety and Health (NIOSH) recommended a new minimum standard, in the absence of background methane, of 80% total incombustible content (TIC) be required in the intake airways of bituminous coal mines, replacing the previous 65% TIC requirement. Most important to monitoring and maintaining the 80% TIC is the ability to effectively collect and analyze representative dust samples that would likely disperse and participate in dust explosion propagation. Research has shown that dust suspended on elevated surfaces is usually finer, more reactive, and more readily dispersible while floor deposits of dust are generally coarser and more difficult to disperse given the same blast of air. The roof, rib, and floor portions of the dust samples were collected and analyzed for incombustible content separately and the results were compared to a band sample of the roof, rib, and floor components. Results indicate that the roof and rib dust samples should be kept separate from floor dust samples and considered individually for analyses. The various experimental collection methods are detailed along with preferred sampling approaches that improve the detectability of potentially hazardous accumulations of explosible dust.     

A novel driver hazard perception sensitivity model based on drivers’ characteristics: A simulator study

Objective: Considering the high annual number of fatal driving accidents in Iran, any approach for reducing the number or severity of driving accidents is a positive step toward decreasing accident-related losses. Accidents can often be avoided by a timely reaction of the driver. One of the steps before reacting to a hazard is perception. Some driver characteristics may affect road hazard perception. In this research, it was assumed that various driver characteristics, including demographic characteristics and cognitive characteristics, have an impact on driver perception.

Methods: The driving simulator used in this research provides various scenarios; for example, passing a pedestrian or animal across the road or placing fixed objects in a 2-lane separated rural road for 2 groups of experienced and inexperienced drivers under day and night lighting conditions. The go/no-go test was carried out in order to assess drivers’ attention to driving tasks and inhibitory control. A structural equation model (SEM) was used to estimate the relation between driver characteristics and sensitivity to road hazard perception. A new hazard perception index was proposed based on the time intervals in the hazard vulnerability.

Results: The results show that the most effective variables in the analysis of sensitivity to hazard perception are driving experience (in kilometers) during the last 3 years and road lighting conditions. Moreover, hazard perception sensitivity was improved by better inhibitory control, selective attention, and decision making, more carefulness, the average amount of daily sleep, and marital status.

Conclusion: The results of this research may be useful in educating and advertising programs. It also could enhance sensitivity to perception of hazards such as pedestrians, animals, and fixed obstacles among young and novice drivers.