Shellac-coated iron oxide nanoparticles for removal of cadmium(II) ions from aqueous solution

This study describes a new effective adsorbent for cadmium removal from aqueous solution synthesized by coating a shellac layer, a natural biodegradable and renewable resin with abundant hydroxyl and carboxylic groups, on the surface of iron oxide magnetic nanoparticles. Transmission Electron Microscopy (TEM) imaging showed shellac-coated magnetic nanoparticle (SCMN) adsorbents had a core-shell structure with a core of 20 nm and shell of 5 nm. Fourier Transform Infrared Spectroscopic analysis suggested the occurrence of reaction between carboxyl groups on the SCMN adsorbent surface and cadmium ions in aqueous solution. Kinetic data were well described by pseudo second-order model and adsorption isotherms were fitted with both Langmuir and Freundlich models with maximum adsorption capacity of 18.80 mg/g. SCMN adsorbents provided a favorable adsorption capacity under high salinity conditions, and cadmium could easily be desorbed using mild organic acid solutions at low concentration.     

Size distributions of aerosol and water-soluble ions in Nanjing during a crop residual burning event

To investigate the impact on urban air pollution by crop residual burning outside Nanjing, aerosol concentration, pollution gas concentration, mass concentration, and water-soluble ion size distribution were observed during one event of November 4-9, 2010. Results show that the size distribution of aerosol concentration is bimodal on pollution days and normal days, with peak values at 60-70 and 200-300 nm, respectively. Aerosol concentration is 10⁴ cm^-3. nm^-1 on pollution days. The peak value of spectrum distribution of aerosol concentration on pollution days is 1.5-3.3 times higher than that on a normal day. Crop residual burning has a great impact on the concentration of fine particles. Diurnal variation of aerosol concentration is trimodal on pollution days and normal days, with peak values at 03:00, 09:00 and 19:00 local standard time. The first peak is impacted by meteorological elements, while the second and third peaks are due to human activities, such as rush hour traffic. Crop residual burning has the greatest impact on SO₂ concentration, followed by NO₂, O₃ is hardly affected. The impact of crop residual burning on fine particles (< 2.1 μm) is larger than on coarse particles (> 2.1 μm), thus ion concentration in fine particles is higher than that in coarse particles. Crop residual burning leads to similar increase in all ion components, thus it has a small impact on the water-soluble ions order. Crop residual burning has a strong impact on the size distribution of K⁺, Cl^-, Na⁺, and F^- and has a weak impact on the size distributions of NH₄⁺, Ca²⁺, NO₃^- and SO₄^2-.     

Aminobenzenesulfonamide functionalized SBA-15 nanoporous molecular sieve: A new and promising adsorbent for preconcentration of lead and copper ions

A rapid method for the extraction and monitoring of nanogram level of Pb²⁺ and Cu²⁺ ions using uniform silanized mesopor (SBA-15) functionalized with aminobenzenesulfonamide groups and flame atomic absorption spectrometry (FAAS) is presented. Aminobenzenesulfonamide functionalized SBA-15 was synthesized according to procedure in the literature and the presence of organic groups in the silica framework was demonstrated by FT-IR spectra. The functionalized product showed the BET surface area 110 m²/g and pore diameter 5.1 nm, based on adsorption-desorption of N₂ at 77 K. The effect of several variables such as (amount of adsorbent, stirring time, pH and presence of other ions in the medium) has been studied. Lead and copper were completely extracted at pH greater than 3 after stirring for 10 min. The maximum capacity of the adsorbent was found to be 191.3 ± 1.4 and 155.0 ± 1.0 μg of lead and copper ions/mg functionalized SBA-15, respectively. The preconcentration factor of the method was found to be 200. The detection limit of the technique was 3.4 and 0.4 ng/mL for Pb²⁺ and Cu²⁺, respectively. The applications of this methodology for real samples were examined by various water type, black tea and pepper samples.     

藏南羊卓雍错湖水化学空间分异特征

2010年7月对藏南羊卓雍错流域进行了水样采集,通过测定与分析,揭示了流域最大湖泊羊卓雍错表层湖水化学水平分布特征和深水剖面变化规律,并探讨了该湖与流域其他水体化学性质的差异。结果表明:流域特殊的高寒气候、湖泊形状与补给来源、湖岸水系发育程度不同是造成羊卓雍错湖水化学空间分异特征明显的关键。在水平方向上,湖水HCO3-、Ca2+以及矿化度南高北低,而SO42-和Mg2+南低北高。这是由于湖水从南向北缓慢流动过程中蒸发浓缩所致;卡鲁雄曲径流量经空姆错补给羊卓雍错北部,使其矿化度较低。在垂直方向上,愈向湖泊深处,湖水SO42-、Cl-、CO32-和矿化度愈大,HCO3-则降低。与流域其他湖泊相比,羊卓雍错水化学性质与同属以降水补给为主的湖泊相近,与以冰雪融水补给为主的湖泊差异显著。与河水和地下水相比,羊卓雍错湖水SO42-和Mg2+当量浓度最大,河水和地下水则HCO3-和Ca2+含量较大。     

重金属离子与依诺沙星相互作用的荧光光谱法研究

荧光分析法是利用物质的荧光性质对物质进行分析的方法,文章应用荧光法研究了不同温度下重金属离子Cu2+、Pb2+及Mn2+与喹诺酮类药物依诺沙星(ENX)的相互作用。结果表明:Cu2+、Pb2+及Mn2+对ENX内源荧光的猝灭机制属于形成复合物所引起的静态猝灭,利用Stern-Volmer关系式计算了ENX与重金属离子Cu2+、Pb2+及Mn2+之间的猝灭常数KSV及结合位点数,根据热力学参数(自由能变ΔG、焓变ΔH、熵变ΔS)确定了ENX与重金属离子之间的主要作用力类型为静电作用力。该研究为探讨环境中重金属离子与ENX的作用机理和环境效应提供了理论依据。     

营养条件对污水中小球藻生长及产能效应的影响

以过滤的富营养化的鱼塘废水为培养液,添加外源的碳、氮、磷元素,考察污水中不同的外源无机碳浓度、总氮浓度、总磷浓度对小球藻(Chlorella vulgaris)的生长、油脂含量和烃类含量的影响。在25℃、光照强度为4 500 Lux、光暗比为12L:12D的条件下培养10 d。单因子方差分析和多重比较结果表明:(1)以Na2CO3做碳源,小球藻生物量和烃类含量在外源无机碳浓度为6 mg/L时最高,油脂含量在外源无机碳浓度为12 mg/L最高。(2)以KNO3做氮源,小球藻生物量在总氮浓度为25 mg/L时最高,油脂含量在总氮浓度为15 mg/L时最高,烃含量在总氮浓度为20 mg/L时最高。(3)以KH2PO4做磷源,小球藻生物量和烃类含量在总磷浓度为2 mg/L时最高,油脂含量在总磷浓度为1.5 mg/L时最高。     

鼎湖山秋季大气细粒子及其二次无机组分的污染特征及来源

利用大气颗粒物质量浓度分析仪（TEOM）及大气细粒子快速捕集及其化学成分自动在线分析系统（RCFP-IC）于2008年10～11月在中国科学院华南植物园鼎湖山定位站进行了大气细粒子（PM2.5）及其二次无机组分（SO42-、NH 4＋和NO 3-）与相关污染气体组分的同步观测与分析,同时结合主成分分析和HYSPLIT轨...     

区域空气质量模拟中查表法的应用研究

在自行开发完善的区域空气质量模式系统RegSRRMS中应用查表法,模拟中国典型城市群对流层大气主要污染物的浓度变化,评估该方法在大气复合污染事件预测和控制中的有效性.首先,利用具有国际先进水平的空气质量模式WRF-CHEM中的化学模块建立了包含完善气相化学、气溶胶过程的箱模式WRFBOX.其次,利用WRFBOX进行化学反应敏感性分析,基于影响污染物的重要因子分别建立了臭氧(O3)及其前体物、无机盐气溶胶和二次有机气溶胶(SOA)查算表数据库,并检验其有效性.最后,将此查算表数据库引入RegSRRMS,建立简化的查表算法.利用直接耦合机制法和查表法对2000年3月珠三角地区污染个例中主要大气污染物浓度进行模拟.通过比较2种方法的模拟结果,显示查表法计算效率提高了57%,能够反映大气光化学反应的非线性特征、气溶胶及其前体物的平衡关系,具有高分辨率、高时效性,能够方便快捷地给出源和受体之间的响应关系,结果可靠.在区域空气质量模式中应用查表法有利于大气污染事件的快速预测以及大气污染控制的快速决策.     

夏季广州城区细颗粒物PM_(2.5)和PM_(1.0)中水溶性无机离子特征

于2008年7月1～31日在广州城区每天采集PM2.5和PM1.0样品.利用离子色谱分析了样品中Na+、NH4+、K+、Mg2+、Ca2+、F-、Cl-、NO3-和SO24-等9种离子组分质量浓度,并同步收集气象因子、大气散射系数、大气能见度以及SO2、NO2、O3气体污染物质量浓度等数据.结果表明,PM2.5和PM1.0中水溶性无机离子总浓度分别为(25.5±10.9)μg·m-3和(22.7±10.5)μg·m-3,分别占PM2.5和PM1.0质量浓度的(47.9±4.3)%和(49.3±4.3)%.SO42-占PM2.5和PM1.0中质量浓度百分比最高,分别为(25.8±4.0)%和(27.5±4.5)%.较高的温度和O3浓度有利于SO24-的生成,较高相对湿度有利于NO3-的生成.PM2.5和PM1.0中亲水性较强的SO42-、NH4+和NO3-对散射系数和能见度影响较大.     

上海市大气颗粒物中水溶性离子的粒径分布特征

分析了上海市嘉定区不同粒径的大气颗粒物中9种水溶性离子(SO42-、NO3-、NH4+、K+、Na+、Cl-、Ca2+、Mg2+、F-)的分布特征.结果显示,SO42-、NO3-和NH4+含量很高,占9种离子总和的65%～81%.颗粒物的C/A值平均为1.08,说明颗粒物呈中性,略偏碱,这可能与缺少碳酸根等的测定有关.1.5μm颗粒物中的离子占所有粒径段离子的52%～87%,表明离子主要集中在细颗粒物中.NH4+、K+呈单峰分布,峰值出现在0.95μm的颗粒段;SO42-、NO3-、Ca2+、Cl-呈双峰分布,峰值分别出现在0.95μm和3.0～7.2μm的粒径段,其中SO42-、NO3-的较高峰出现在0.95μm的细颗粒段,Ca2+的较高峰出现在3.0μm的颗粒段,Cl-则两峰高度相当;既有双峰分布又有单峰分布的离子是Na+、Mg2+和F-,3种离子的较高峰出现在3.0μm的颗粒段.离子粒径分布与采样期间的气象条件、离子的形成机制和来源有关.