基于改进的非线性GM(1,1)模型的职业病预测研究

为了更准确地预测职业病，在传统GM(1,1)模型的基础上，提出改进的非线性GM(1,1)模型，在传统的GM(1,1)模型中引入弱化算子，将紧邻均值与原始数据之间的线性假设改为非线性假设，提高曲线的拟合度。以2005—2014年的全国职业病例数为研究对象，进行数据拟合和预测分析，其中以2014年职业病例数作为验证数据，并利用后验差比值和小误差概率2个参数，检验该改进模型的预测精度。由应用实例的分析结果可知:在职业病发病趋势的预测方面，改进的非线性GM(1,1)模型的预测精度提高到一级，曲线拟合度较高，预测得到2015年的职业病例数为34 900例。     

提高GPS定位精度的群调度滤波算法*

为解决现行安全生产科技领域中全球定位系统（GPS）/惯性导航系统（INS）融合系统容易产生较大时变误差的关键问题，满足GPS定位信号的精度和信号数据处理时间的要求，提出1种群调度滤波算法，通过实验仿真，分别与模糊算法、机器学习算法及卡尔曼滤波网络算法进行比较研究。结果表明:群调度滤波算法兼顾了定位精度与数据处理时间，具有较大优势，可在航空安全、船舶安全、应急监测、灾后抢险等安全科技领域广泛应用。     

基于GIS的海洋底栖生物栖息密度空间插值方法

在地理信息系统即GIS的支持下,分别采用反距离加权(inverse distance weighted,IDW)、普通克里格(ordinary krig-ing,OK)、规则样条(regularize spline,RS)和张力样条(tension spline,TS)4种插值方法对2006年7月获得的大连湾底栖生物栖息密度的数据进行空间插值处理,并对插值结果的精确度进行交叉验证,分析和比较不同插值方法获得的分布图。结果表明,插值精确度普通克里格>反距离加权>张力样条>规则样条;4种方法均能较客观的模拟出底栖生物栖息密度的分布趋势,但是在整体趋势和局部趋势两方面的综合考虑下,普通克里格的表现效果更好。文章进一步指出,在确定站位数量及分布前提下,插值结果的精确度可以通过选择空间插值方法得以改善,但其根本还是取决于站位布置的数量和其分布合理性。     

土壤连续属性空间插值方法及其精度的研究进展

作为土壤变化的时空定量监测方法,土壤属性空间插值方法及其精度是计量土壤学和"数字土壤"领域的重要研究内容。文章首先介绍了土壤属性空间插值的常用方法,包括克立格插值法(Kriging)、反距离权重法(IDW)、样条插值法(Spline)、贝叶斯最大熵(BME)、地理加权回归(GWR)以及高精度曲面建模方法(HASM);其次阐述了土壤属性空间插值精度验证的方法和指标;再次总结了能够提高土壤属性插值精度的6种途径,包括合理选择插值方法、准确设定插值方法参数、合理设计采样数目和密度、注意空间自相关程度和范围的影响、科学安排实验分析顺序以及结合辅助信息进行插值;最后从插值方法的选择、验证指标的选取以及辅助信息的结合三个方面指出了土壤属性空间插值方法及其精度的未来研究方向。     

绿色食品产地生态环境质量分析与评价--以庆安县国家级生态农业示范区为例

采用1993年、2000年和2003年庆安县生态环境质量监测数据,通过指数评价和加权综合评价法,分析评价庆安县绿色食品产地的生态环境质量,并利用GIS地理统计等功能,用变异估计法及克里格插值法,以可视化的方式展现绿色食品产地环境质量的空间分布.结果表明,庆安县中部和西南部的环境质量最好,最适宜发展AA级绿色食品基地; 西北部和东南部的绿色食品产地环境质量虽然是清洁、安全的,但有逐渐恶化趋势,需引起进一步关注.     

Characterizing spatial distribution and sources of heavy metals in the soils from mining-smelting activities in Shuikoushan, Hunan Province, China

The spatial variation of heavy metals in the soils in Shuikoushan mining-smelting area, Hunan Province, China, was investigated using multivariate and geo-statistic analysis. A total of 106 composite soil samples were collected in an area of about 100 km2. Concentrations of total As, Cd, Pb, Zn, Cu and Cr were measured using inductively coupled plasma mass spectrometry (ICP-MS). Arsenic and Pb were found to have a common source, indicating the same sources and spreading processes, such as aerosols and airborne particulates from smelting chimneys. Airborne sources from smelting chimneys contributed greatly to Cd in the area, which demonstrated the same dispersion pattern as As and Pb. However, two hot spots of Cd around smelters were possibly enlarged by wastewaters, demonstrating another important source of Cd in Shuikouhsan. Geo-statistic interpolated mapping demonstrated that hotspots of Zn were only found proximal to the large smelters, suggesting that Zn primarily came from the chimneys of larger smelters. The major Cu hot-spots appeared closely to the tailing dam, indicating that weathering and leaching of tailings were the major sources of Cu contamination in Shuikoushan. Our findings indicated that airborne volatile particles and aerosols contributed the most to As, Cd, Pb, Zn and Cu contamination, while Cd and Cu may also derive from the discharge of wastewater from smelters and the leaching of tailings, respectively.     

有机磷农药二元混合物联合效应评价新方法的研究

以敌敌畏、乐果联合作用于线虫的毒理学实验为基础,基于FH插值法理论,通过较少的实验数据建立有机磷农药二元混合物联合效应模型,求解作用效应表达式并绘制联合效应三维曲面图;基于合并用药分析公式,计算联合作用评价q值并绘制农药浓度与q值的联合作用评价三维曲面图,结果表明敌敌畏与乐果混合物联合作用不仅表现为相加作用,而且还在局部低浓度表现为拮抗作用,与多元统计分析结果一致。上述研究表明FH插值法理论可作为二元有机磷农药联合效应分析及评价的一种新方法。     

Comparative analysis of two tobacco surveillance questionnaires used in NHANES: accuracy of self-reported smoking status

National Health and Nutrition Examination Survey (NHANES) uses two tobacco use surveillance questionnaires. One is administered during an at-home interview (HI) and the other, during an examination session at a mobile examination center (MEC). NHANES data for the years 1999–2012 were used to evaluate the consistency of responses to tobacco surveillance questions in HI and MEC interview. In addition, accuracy of self-reported smoking status was evaluated. Of those who reported to be daily cigarette smokers during HI, 18.7% reported to be either some-day smokers or nonsmokers during MEC interview. Of those who reported to be some-day cigarette smokers during HI, 22.1% reported to be daily smokers and 17.5% reported to be nonsmokers. Also, 4.1% of those who reported to be nonsmokers during HI reported to be either daily or some-day smokers during MEC interview. Using serum cotinine measurements taken during MEC interview, 27.1% were found to be smokers and 72.9% were found to be nonsmokers. In general, a moderate to high agreement, as measured by the κ statistic, was found between the self-reported responses to tobacco use questions during the home and MEC interviews as well as between smoking statuses based on self-reported and serum cotinine measurements.     

烟气排放连续监测系统的数据准确性研究

随着全国环境自动监控建设任务的完成,“十二五”期间要把探索环境监控数据的应用摆在突出位置,使环境监控数据在环境质量监管、排污费征收、污染物总量减排核查核算、环境执法和环境决策等方面发挥最大效能,最重要的是保证环境监控数据的真实性和准确性。CEMS作为废气自动监控系统,结合CEMS数据应用到环境管理的需求,探讨确保CEMS数据真实性和准确性应注意的事项,通过运用这些注意事项分析实时在线监控数据,能发现CEMS数据中存在的问题,提高CEMS数据的准确性和真实性。     

提高快速法测定C OD准确度及精密度的方法

介绍了用快速法测定COD分析中提高准确度及精密度的方法。