基于Landsat 8遥感数据的天津市地表温度反演

以Landsat 8遥感数据为数据源,进行天津市地表温度反演研究。首先采用单通道算法反演地表温度,并利用均值标准差法进行温度分级。然后建立不同温度等级面积比例的估算模型。再通过随机样点,从不同温度等级和土地覆盖类型2个角度,分别建立并比较不同类样点的地表温度与各指数的拟合模型。结果表明:次高温区域面积比例与人口密度、人均GDP都具有较高的决定系数;地表温度与NDVI、BAEM的二元线性回归决定系数高于地表温度与单一指数的决定系数;将样点分类后,低温点与MNDBI的决定系数高于其他温度等级样点,水域和植被样点与各种指数的决定系数高于其他地物类型样点。     

Spatial and Seasonal Response of Municipal Water Use to Weather across the Contiguous U.S.

Weather variability has the potential to influence municipal water use, particularly in dry regions such as the western United States (U.S.). Outdoor water use can account for more than half of annual household water use and may be particularly responsive to weather, but little is known about how the expected magnitude of these responses varies across the U.S. This nationwide study identified the response of municipal water use to monthly weather (i.e., temperature, precipitation, evapotranspiration [ET]) using monthly water deliveries for 229 cities in the contiguous U.S. Using city‐specific multiple regression and region‐specific models with city fixed effects, we investigated what portion of the variability in municipal water use was explained by weather across cities, and also estimated responses to weather across seasons and climate regions. Our findings indicated municipal water use was generally well‐explained by weather, with median adjusted R² ranging from 63% to 95% across climate regions. Weather was more predictive of water use in dry climates compared to wet, and temperature had more explanatory power than precipitation or ET. In response to a 1°C increase in monthly maximum temperature, municipal water use was shown to increase by 3.2% and 3.9% in dry cities in winter and summer, respectively, with smaller changes in wet cities. Quantifying these responses allows urban water managers to plan for weather‐driven variability in water use.     

300MW锅炉低NOx燃烧系统改造效果分析

针对日益严重的环境污染、锅炉热效率低等问题，阐述了燃煤锅炉炉内空间分级燃烧技术、煤粉浓淡高效分离技术改造项目和特点，提出了对燃烧器系统、一次风管道、二次风系统和空预器系统等系统进行具体的低氮改造措施。分析了300 MW燃煤锅炉低氮改造后的热经济性和安全性。经试验验证，1号锅炉低氮改造后，锅炉NOx 排放量大幅减少，排放浓度降到了280 mg／m3。     

初始温度和压力对排污空间甲烷-空气混合物爆燃特性影响的模拟研究

市政排污空间作为城市公共基础设施的重要组成部分，易积聚可燃气体形成爆炸性环境。结合排污空间的特殊环境条件，采用Fluidyn-MP多物理场数值模拟软件，建立了20 L球形爆炸罐分析模型，通过改变初始温度和初始压力，对排污空间甲烷-空气混合物爆燃特性及其变化规律进行模拟研究。结果表明:初始温度升高导致甲烷-空气混合物最大爆炸压力降低，缩短了到达最大爆炸压力的时间；初始压力增加导致最大爆炸压力急剧升高，并延长了到达最大爆炸压力的时间；最大爆炸压力对初始压力的敏感程度远大于初始温度的影响。此外，随着初始温度和初始压力的升高，爆炸火焰平均传播速度增加，而火焰传播速度对初始温度较敏感。     

大肠杆菌吸附-化学还原法用废含金催化剂制备金纳米线

采用大肠杆菌吸附-化学还原法,以大肠杆菌(ECCs)为模板、十六烷基三甲基溴化铵为保护剂、抗坏血酸为还原剂,由废含金催化剂制备金纳米线(AuNWs)。采用XRD,SEM,TEM等技术对AuNWs进行表征。研究了AuNWs对罗丹明6G(R6G)和4-巯基苯甲酸(4-MBA)的拉曼散射信号的增强效果。实验结果表明:在制备过程中加入微生物ECCs,可使金回收率提高约20百分点;当溶液pH小于4时,反应2 h后,有大量呈线状的AuNWs聚集沉降,金回收率可达99%1以上。表征结果显示,AuNWs呈多晶结构,晶格间距为0.23 nm。表面增强拉曼散射分析表明,AuNWs对R6G和4-MBA具有良好的拉曼光谱增强性能。     

Ti3C2纳米层状材料对废水中Cr（Ⅵ）的光催化去除性能

以Ti₃AlC₂为原料,采用HF刻蚀工艺制备出12种Ti₃C₂纳米层状材料,对其形貌进行了表征,并考察了以其作为光催化剂对废水中Cr（Ⅵ）的处理效果。实验结果表明：HF体积分数为80%、刻蚀时间为48 h时得到的MX-80-48的形貌较好;MX-80-48具有类似石墨烯的二维层状结构,纳米层厚度约20~50 nm,孔径2~10 nm,比表面积14.8 m²/g,在400~700 nm可见光范围内表现出强烈的吸光性;当Cr（Ⅵ）的初始质量浓度为40.00 mg/L、MX-80-48投加量为200 mg/L、pH=2、反应时间4 h（暗反应1 h+光照3 h）时,Cr（Ⅵ）去除率可达100%。     

What matters for work engagement? A diary study on resources and the benefits of selective optimization with compensation for state work engagement

This diary study addresses the benefits of employees' daily use of selective optimization with compensation (SOC) for state work engagement. We hypothesized that day‐level SOC not only directly fosters work engagement but that SOC also reveals its beneficial effects for work engagement in interaction with both external and internal resources. Specifically, we proposed SOC substitutes for job control, role clarity, and state of being recovered, thus helping employees manage low daily levels of these resources. We tested our hypotheses with a sample of 138 employees who completed two daily surveys over a total of 545 workdays. Results of multilevel analyses revealed that SOC benefits work engagement in both proposed ways. First, day‐level SOC was positively related to state work engagement. Additionally, day‐level role clarity and state of being recovered predicted state work engagement, but day‐level job control did not. Second, SOC benefitted state work engagement by offsetting low levels of role clarity and being recovered, and by boosting job control in their respective relationships with work engagement. The results suggest that by using SOC at work, employees can actively enhance their own work engagement on a given workday. This knowledge provides promising starting points for the development of interventions.     

纳米铁催化分解高氯酸盐废水的反应动力学

通过实验考察了酸性条件下纳米铁催化分解高氯酸盐过程中的影响因素,对其分解的动力学进行了研究,并对纳米铁催化剂结构及微观形貌进行SEM、EDS和XRD表征分析。利用阿仑尼乌斯方程和幂指数方程拟合反应动力学方程,获得了高氯酸盐分解动力学方程Ct=C0exp{-0.03773exp(-201.65/T)[H]0.191t},理论的计算值与实验值吻合较好,误差在15%以内。     

湖北省2008年初低温雨雪冰冻过程气候特征分析

2008年初，湖北省出现了严重的低温雨雪冰冻灾害，直接经济损失高达110亿元以上，有必要对灾害期间的气候特征进行系统、科学的分析和总结。对湖北省76个气象站2008年1月12日～2月3日气温、降水（雪）、日照以及低温持续日数等要素进行时空间差异分析及历史与同期比较，并选取10个代表站历史上所有低温雨雪天气过程，对其过程持续低温日数、最长连续雨雪日数、过程极端低温进行比较分析。结果表明：（1）此次过程的平均气温异常偏低，该省大部为-1～-2℃，比常年同期偏低4～6℃，为各站历史同期最低，其中主要是最高气温异常偏低所致，但极端低温并不低；（2）降雪过程频繁，雨雪量异常偏多；（3）低温冰冻持续时间长，该省大部在16～22 d，位于历史第一；（4）日照异常偏少。持续而稳定的大气环流异常形势是湖北省大范围低温雨雪天气的直接原因。     

火灾高温下CFRP加固钢筋混凝土梁温度场分析

综合国外CFRP加固混凝土结构抗火试验相关研究,总结了CFRP的高温热工性能参数。用ANSYS软件对火灾高温下不同情况(无防火保护层和有防火保护层)和不同工况(防火涂料涂抹形式)下CFRP加固后的钢筋混凝土梁进行了温度场数值模拟研究。结果表明,防火涂料厚40 mm时,梁耐火极限可达2.5小时以上,且底面和两侧面全面涂抹防火涂料的防火效果最好。本文研究有助于进一步深入认识CFRP加固钢筋混凝土结构在高温下的力学性能和耐火极限,且对CFRP加固后的结构防火设计具有一定的指导意义。