排序方式: 共有28条查询结果,搜索用时 15 毫秒
1.
This work was conducted to determine the practicability of using a new adsorbent 4-ethyl thiosemicarbazide intercalated,organophilic calcined hydrotalcite(ETSC-OHTC) for the removal of uranium(U(VI)),and thorium(Th(IV)) from water and wastewater.The FTIR analysis helped in realizing the involvement of nitrogen and sulphur atoms of ETSC in binding the metal ions through complex formation.Parameters like adsorbent dosage,solution pH,initial metal ions concentration,contact time and ionic strength,that influence adsorption phenomenon,were studied.The optimum pH for maximum adsorption of U(VI) and Th(IV) was found to be in the range 4.0-6.0.The contact time required for reaching equilibrium was 4 hr.The pseudo second-order kinetic model was the best fit to represent the kinetic data.Analysis of the equilibrium adsorption data using Langmuir,Freundlich and Sips models showed that the Freundlich model was well suited to describe the metal ions adsorption.The K F values were 25.43 and 29.11mg/g for U(VI) and Th(IV),respectively,at 30°C.The adsorbent can be regenerated effectively from U(VI) and Th(IV) loaded ones using 0.01mol/L HCl.The new adsorbent was quite stable for many cycles,without much reduction in its adsorption capacity towards the metals. 相似文献
2.
应用水滑石实时合成的方法从高放废液中分离模拟放射性核素钕,通过酸碱滴定、单因素试验及X-射线衍射(XRD)研究确定了最佳分离条件,用红外光谱(FT-IR)、扫描电镜(SEM)、透射电镜(TEM)等对合成的含钕水滑石的结构、形貌进行了分析.结果表明:模拟放射性核素钕的最佳分离条件,初始ρ(Nd3+)为150 mg/L,pH为10,n(Mg)/[n(Al) +n(Nd)]为3,在该条件下5次平行试验钕的去除率平均值为96.40%,并且钕嵌入到了水滑石的晶格中,合成的含钕水滑石形貌大多为层状六边形;含钕水滑石煅烧产物主要为尖晶石,煅烧产物中未见氧化钕相,表明嵌入到水滑石晶格中的钕在煅烧后仍存在于尖晶石的晶体结构中. 相似文献
3.
采用实时合成水滑石的方法从高放废液中分离模拟放射性核素锶,通过单因素实验并借助XRD分析确定了最佳分离实验条件,同时,运用FTIR、SEM等技术手段对合成的含锶水滑石的结构、形貌进行了分析.结果表明,当Sr2+初始浓度为70mg.L-1、pH值为10.5、n(Mg+Sr)/n(Al)为3时,锶的去除率最高可达95%以上;XRD和SEM分析结果表明,锶嵌入了水滑石的晶格中,合成的含锶水滑石形貌为层状六边形;含锶水滑石煅烧产物主要为尖晶石,且煅烧产物中未见氧化锶,表明嵌入到水滑石晶格中的锶在煅烧后存在于尖晶石的晶体结构中. 相似文献
4.
采用化学共沉淀法制备磁性钯钴水滑石催化剂(M-Pd/Co@CHT),用于吸附催化还原去除水中的高氯酸盐.同时,研究了不同溶液pH值、催化剂投加量、温度、共存离子和氢气流量等因素的影响,考察了吸附动力学和等温吸附过程.最后对反应前后材料进行表征,以明确吸附催化氢还原反应机理.结果表明:在较宽的pH范围(5~10)内,M-Pd/Co@CHT显示出对高氯酸盐较高、较稳定的吸附效率;伪二阶动力学模型和Langmuir模型能很好地拟合催化剂对高氯酸盐的吸附规律,说明该吸附过程是近似单层的化学吸附,最大单层吸附容量为172.65 mg·g-1;温度、投加量和供氢气量对M-Pd/Co@CHT加氢催化还原高氯酸盐有显著的影响,当高氯酸盐初始浓度为10 mg·L-1时,在最优实验条件下30 min可以去除约54%的高氯酸盐;利用XRD、FTIR、BET、XPS及VSM等手段对M-Pd/Co@CHT进行表征,结果表明,介孔M-Pd/Co@CHT可以有效吸附或催化高氯酸盐;高氯酸盐首先被吸附至M-Pd/Co@CHT上从而恢复其层状结构,而后在Pd/Co二元金属催化剂的作用下被氢还原去除;利用外加磁场能够实现材料的固液分离,可以有效地避免二次污染. 相似文献
5.
合成水滑石治理水体阴离子染料污染研究 总被引:12,自引:2,他引:12
利用不同层电荷的合成水滑石(层状双氢氧化物)和它们的焙烧态为吸附剂,系统考察了此类材料对于甲基橙染料的吸附保留行为,通过粉末X射线衍射,傅立叶红外和扫描电镜测试说明经水热处理得到的合成水滑石具有良好的结晶度和相纯度.水滑石及其焙烧态对于甲基橙阴离子染料的吸附研究主要采用间歇平衡法实验,吸附体系的电导率变化显示了水滑石的记忆效应,并有可能是焙烧态水滑石再生的动态过程反应低浓度甲基橙在焙烧态水滑石上的吸附实验说明,水滑石层电荷密度对于其焙烧态氧化物吸附低浓度阴离子具有显著的影响。 相似文献
6.
5种吸附剂对水中离子液体的吸附性能 总被引:1,自引:0,他引:1
实验研究了蒙脱土、活性白土、人造沸石、活性炭和水滑石5种吸附材料在25℃和50℃下对[Bmim]Cl的吸附过程,结果表明,蒙脱土对离子液体的去除效果最好,温度对活性炭的吸附有一定的影响,而对其他吸附剂的影响不大,说明这些无机矿物发生了离子交换型吸附过程。实验进一步研究了蒙脱土在25℃下对[Bmim]Cl、[Bmim]BF4、[Bmim]PF6、[Bmim]DBP、[Hmim]Cl和[Omim]Cl 6种离子液体的吸附行为,结果表明,对于阳离子相同的离子液体,阴离子对吸附影响不大;对于阴离子相同的离子液体,其饱和吸附量随着阳离子链长的增加而减小。 相似文献
7.
8.
LI Yu-jiang YANG Min ZHANG Xiao-jin WU Tao CAO Nan WEI N BI Yan-jun WANG Jing 《环境科学学报(英文版)》2006,18(1):23-28
A hydrotalcite with Mg/AI molar ratio 2 was prepared by co-precipitation method and was characterized by XRD, TG/DTA, Zeta potential and BET surface area. The hydrotalcite was calcined at 500℃, with the dehydration from interlayer, the dehydroxilation from the brucite-like layer and the decomposition of carbonate successively, transformed into the mixed oxide type. The removal of thiocyanate from aqueous solution by using the original hydrotalcite and calcined hydrotalcite (HTC-500) was investigated. The results showed that the thiocyanate adsorption capacity of calcined hydrotalcite was much higher than that of the original form. Calcined hydrotalcite was particularly effective at removing thiocyanate, and that the effective range of pH for the thiocyanate removal are between 5.5-10.0. The experimental data of thiocyanate removal fit nicely with Langmuir isotherm, and the saturated adsorption uptake was 96.2 mg SCN-/g HTC-500. The adsorption of thiocyanate by calcined hydrotalcite follows first-order kinetics. And the intercalation to the structure recovery for calcined hydrotalcite. But the presence of additional anions could affect the adsorption behavior of thiocyanate. 相似文献
9.
M.V. Villa M.J. Sánchez‐Martín M. Sánchez‐Camazano 《Journal of environmental science and health. Part. B》2013,48(3):509-525
Abstract This paper reports on the adsorption of different organic pesticides by hydrotalcite, hydrotalcite heated to 500°C and organo‐hydrotalcite in aqueous medium by employing adsorption isotherms, and using X‐ray diffraction and infrared spectroscopy techniques. The results suggest that the adsorption capacity of the different materials depends on their nature as well as on the structure, polarity and hydrophobic or anionic nature of the pesticides. The results also show that hydrotalcite, both natural and after calcination at 500°C, is not a good sorbent of hydrophobic pesticides. The data demonstrated that both types of hydrotalcite, however, are very good sorbents of glyphosphate. Furthermore, the organo‐hydrotalcites may be as good sorbents as organo‐montmorillonites for hydrophobic pesticides. 相似文献
10.
Mg/Al/Fe复合氧化物吸附去除水体中氟化物的研究 总被引:2,自引:2,他引:0
采用水热法合成了不同铁掺杂量的Mg/Al/Fe型类水滑石(MAF),根据X射线衍射(XRD)的测定结果,铁存在一个最佳投加量,铁的掺杂量过大则会导致水滑石的层状结构被破坏。通过扫描电镜(SEM)和比表面分析仪(BET)研究了MAF焙烧后的复合金属氧化物(CMAF)的结构和性能,并考察了CMAF对水中氟离子的吸附性能。与CMA相比(铁掺杂量为零),CMAF对氟离子的吸附去除效率明显提高(最大吸附容量75.2 mg/g),整个吸附过程可以用Langmuir吸附等温线更好地描述。通过XRD测定和晶格参数计算,CMAF的结构由吸附前的复合氧化物恢复到层状水滑石结构,表明氟离子在水滑石重构过程中作为层间阴离子进入到水滑石内部,从而达到较高的除氟效率。 相似文献