电泳油漆废水凝聚处理研究

以高浓度电泳漆废水用酸性凝聚和碱性凝聚进行处理研究，应用结果表明，在控制ＰＨ＝２．５～３条件下进行酸性凝聚，ＣＯＤ去除率可达９１％～９３％酸性凝聚后出水，与低浓度废水混合，再用ＰＦＳ为凝聚剂，控制ＰＨ＝７～９，进行凝聚气浮处理，可使排放水质中ＣＯＤ，ＰＨ，ＳＳ和色度稳定达标。     

Fenton试剂处理汽车油漆废渣

采用Fenton试剂处理汽车油漆废渣。考察了FeSO_4用量、H_2O_2用量、反应温度、反应时间对处理效果的影响。实验结果表明,在FeSO_4用量为20.5 mg/g、H_2O_2用量为0.6 g/g、反应温度为80 ℃、反应时间为3 h的最优条件下,清漆渣、色漆渣、底漆渣3种漆渣的干基减量率均为20%左右,湿基减量率分别为67.9%、48.2%和64.2%,3种产物的脱水性能均有不同程度的提高,处理后废液的COD均为2 000 mg/L左右。采用Fenton试剂处理后的清漆渣产物粒径与原料相似,产物颗粒球形度高,表面粗糙,内部为多孔结构,产物作为固体燃料时燃烧更充分。Fenton试剂处理未对漆渣中的树脂主体产生较大的破坏。     

Analysis of phytochelatin complexes in the lead tolerant vetiver grass [Vetiveria zizanioides (L.)] using liquid chromatography and mass spectrometry

Ethylenediamene tetraacetic acid (EDTA) has been used to mobilize soil lead (Pb) and enhance plant uptake for phytoremediation. Chelant bound Pb is considered less toxic compared to free Pb ions and hence might induce less stress on plants. Characterization of possible Pb complexes with phytochelatins (PC_n, metal-binding peptides) and EDTA in plant tissues will enhance our understanding of Pb tolerance mechanisms. In a previous study, we showed that vetiver grass (Vetiveria zizanioides L.) can accumulate up to 19,800 and 3350 mg Pb kg⁻¹ dry weight in root and shoot tissues, respectively; in a hydroponics set-up. Following the basic incubation study, a greenhouse experiment was conducted to elucidate the efficiency of vetiver grass (with or without EDTA) in remediating Pb-contaminated soils from actual residential sites where Pb-based paints were used. The levels of total thiols, PC_n, and catalase (an antioxidant enzyme) were measured in vetiver root and shoot following chelant-assisted phytostabilization. In the presence of 15 mM kg ⁻¹ EDTA, vetiver accumulated 4460 and 480 mg Pb kg⁻¹ dry root and shoot tissue, respectively; that are 15- and 24-fold higher compared to those in untreated controls. Despite higher Pb concentrations in the plant tissues, the amount of total thiols and catalase activity in EDTA treated vetiver tissues was comparable to chelant unamended controls, indicating lowered Pb toxicity by chelation with EDTA. The identification of glutathione (referred as PC₁) (m/z 308.2), along with chelated complexes like Pb-EDTA (m/z 498.8) and PC₁-Pb-EDTA (m/z 805.3) in vetiver root tissue using electrospray tandem mass spectrometry (ES-MS) highlights the possible role of such species towards Pb tolerance in vetiver grass.     

Leaching of copper and zinc from spent antifouling paint particles

Leaching of Cu and Zn from a composite of spent antifouling paint particles, containing about 300 mg g⁻¹ and 110 mg g⁻¹ of the respective metals, was studied in batch experiments. For a given set of simulated environmental conditions, release of Cu was independent of paint particle concentration due to attainment of pseudo-saturation, but Zn was less constrained by solubility effects and release increased with increasing particle concentration. Leaching of Cu increased but Zn decreased with increasing salinity, consistent with mechanisms governing the dissolution of Cu₂O in the presence of chloride and Zn acrylates in the presence of seawater cations. Because of complex reaction kinetics and the presence of calcium carbonate in the paint matrix, metal leaching appeared to be greater at 4 °C than 19 °C under many conditions. These findings have important environmental and biological implications regarding the deliberate or inadvertent disposal of antifouling paint residues.     

Environmental site assessments and audits: Building inspection requirements

Environmental site assessment criteria were originally developed by organizations that focused, almost exclusively, on surface, subsurface, and pollution source contamination. Many of the hazards associated with indoor environments and building structures were traditionally not considered when evaluating sources and entities of environmental pollution. Since a large number of building materials are potentially hazardous, careful evaluation is necessary. Until recently, little information on building inspection requirements of environmental problems has been published. Traditionally, asbestos has been the main component of concern. The ever-changing environmental standards have dramatically expanded the scope of building surveys. Indoor environmental concerns, for example, currently include formaldehyde, lead-based paint, polychlorinated biphenyls, radon, and indoor air pollution. Environmental regulations are being expanded and developed that specifically include building structures. These regulatory standards are being triggered by an increased awareness of health effects from indoor exposure, fires, spills, and other accidents that have resulted in injury, death, and financial loss. This article discusses various aspects of assessments for building structures.     

AQ标准《油漆与粉刷作业安全规范》编制要点

从行业安全现状以及行业安全标准化两方面介绍AQ标准《油漆与粉刷作业安全规范》编制背景;分析油漆与粉刷作业特点、危害来源及作业事故类型;对标准编制方法与思路、用词技巧、重点内容、章节划分等进行讨论;同时对高空吊板的使用以及缺氧危险作业与有限空间作业问题进行探析。针对该标准的讨论有助于标准的贯彻执行,对安全技术类标准的编制也具有参考价值。     

Conceptual issues in designing a policy to phase out metal-based antifouling paints on recreational boats in San Diego Bay

In marine areas throughout the world where recreational boats are densely located, concentrations of copper in the water are being found to be in excess of government standards, due to the hull coatings used on these boats. Copper-based hull coatings are intended to be antifouling in that they retard the growth of algae, barnacles and tubeworms; but alternatives exist that can eliminate the harm that copper contamination does to marine organisms. A variety of policy options are available to mandate or provide economic incentives to switch to these less harmful alternatives. This paper puts forth a conceptual framework for thinking about how to design and evaluate alternative policies to transition to nontoxic boat hulls, drawing from the authors' experience designing a policy for use in San Diego Bay. Many of the issues raised are broadly applicable to environmental problems where the solution involves a large-scale replacement of durable consumer goods.     

油漆挥发分爆炸特性及浓度检测装置设计研究

为了实现对喷涂车间内挥发分浓度的检测，进行20 L球形爆炸特性测试实验，分析了油漆挥发分主成分及爆炸特性，根据油漆挥发分受热易挥发遇冷易凝结的物理特性、采样器采样原理、滤膜增重法测量原理以及基于单机片C++软件程序编写的电路智能控制技术，设计1种喷涂车间挥发分浓度检测装置。研究结果表明:油漆挥发分主成分具有爆炸性，且随着油漆颗粒物浓度增大，爆炸压力也增加。设计的装置对挥发分的采集率都在90%以上，总采集率为93.1%~98.9%，装置能够较为准确地检测挥发分浓度。     

基于数值模拟的细水雾在汽车涂装车间喷漆室的应用研究

采用FDS软件对细水雾扑救汽车涂装车间喷漆室火灾的灭火效能进行数值模拟分析,着重探讨了喷漆室纵向通风、细水雾雾滴粒径、雾滴喷射速度、汽车障碍物等对扑灭油漆火的影响。模拟结果表明:在细水雾与油漆火的相互作用过程中,细水雾对火源的表面冷却和隔氧窒息作用显著;为了防止室内氧气得到补充,在开启细水雾灭火的同时应当联动控制关闭纵向通风系统;在模拟工况条件下雾滴粒径为100μm~300μm的细水雾灭火效果优于粒径为400μm、500μm的细水雾;雾滴在一定喷射速度范围内速度越大灭火效果越好,喷射速度为10m/s的雾滴灭火效果明显优于3m/s和5m/s的雾滴,但是为了防止火焰横向蔓延,喷射速度不宜过高;在汽车障碍物火灾中部分微小的细水雾雾滴受到火焰的卷吸作用,可以绕过障碍物进入火区发挥冷却作用,细水雾灭火系统能够有效控制障碍物火灾,可以应用于汽车涂装车间喷漆室。     

可剥性气相防锈涂料在海洋环境中的防锈实验研究

研制了一种可剥性气相防锈涂料，主要以乙烯基高分子树脂和环氧树脂为成膜物质，另还有复合型油溶性气相缓蚀剂、稳定剂、增韧剂、抗氧剂和混合有机溶剂等。该涂料能够在常温下快速成膜，所形成的涂层具有优良的柔韧性能、耐冲击强度、气相防锈性能和可大面积地进行剥离性能。针对4种不同的海洋环境进行了实际的防锈性能实验，结果表明该涂料短期内可以在海洋环境下对金属进行防锈。