报废汽车拆解工艺的比对与研究

报废汽车具有良好的资源属性,处理企业选取合理的处理工艺对其进行处置,不仅能够提高经济效益,也可以有效保护生态环境。通过对当前报废汽车处理工艺技术进行分析比对,针对不同拆解企业提出相应的工艺选取建议,为产业发展提供帮助。     

高效率颗粒物微物理模型简介与重污染过程应用分析

中国细颗粒物(PM2.5)导致的空气污染和雾霾天气问题越来越突出,在低层对流层中很多地方都有显著的二次颗粒物生成过程,因此对颗粒物物理化学转化过程的研究具有重要意义,其转化过程对空气质量模式模拟和预报的准确性有重要影响。高效率颗粒物微物理(APM)模型经过近20多年的研究和发展,在全球化学传输模型(GEOS-Chem)、区域性气象和化学预报模型(WRF-Chem)通用地球系统模型(CESM-CAM5)等气象及环境空气质量预报模型中取得了很好的应用验证,能够在全球/区域等不同尺度对粒子生成、长大、凝聚、消除等微物理过程以及气溶胶光学厚度(AOD)、直接/间接辐射强迫等进行模拟。应用GEOS-Chem-APM模式模拟了2014年2月京津冀区域的重污染过程。结果显示,湿度模拟的准确性对其他物理和污染物浓度等模拟结果有重要作用;2月20—26日的重污染过程模拟结果与实际观测较为吻合,主要污染特点是较高的湿度(90%以上),同时,二次颗粒物和包裹了二次物种的一次颗粒物(黑碳/有机碳)是低能见度的最大贡献者。     

钙钛矿型La_(0.8)Ce_(0.2)Fe_(1-x)Co_xO_3催化剂的制备及其三效催化活性

采用自燃烧法制备了一组钙钛矿型复合氧化物La_(0.8)Ce_(0.2)Fe_(1-x)Co_xO_3(x=0.9,0.7,0.5,0.3,0.1),并考察了其对CO、C_3H_6和NO的三效催化活性。XRD和SEM表征结果显示,La_(0.8)Ce_(0.2)Fe_(1-x)Co_xO_3具有良好的钙钛矿型晶体结构,晶粒大小为纳米级并自组装成片状结构。催化剂的比表面积为14.73~22.43 m~2/g,含有微孔和介孔结构。催化活性评价结果表明:La_(0.8)Ce_(0.2)Fe_(0.1)Co_(0.9)O_3具有很好的三效催化活性,在理论空燃比的条件下,CO、C_3H_6和NO的起燃温度分别为195℃、264℃和290℃,完全转化温度分别为239℃、418℃和415℃,低温三效催化活性良好;Fe和Co的掺杂量同时影响着La_(0.8)Ce_(0.2)Fe_(1-x)Co_xO_3的催化效果。     

Optimal Absorbent Evaluation for the CO2 Separating Process by Absorption Loading,Desorption Efficiency,Cost, and Environmental Tolerance

The CO₂ absorption capacities of potassium glycinate, potassium sarcosinate (choline, proline), mono-ethanolamine (MEA), and tri-ethanolamine were evaluated to find the optimal absorbent for separating CO₂ from gaseous products by a CO₂ purification process. The absorption loading, desorption efficiency, cost, and environmental tolerance were assessed to select the optimal absorbent. MEA was found to be the optimum absorbent for separating the CO₂ and H₂ mixture in gaseous product. The maximum absorption loading rate was 0.77 mol CO₂ per mol MEA at temperature of 20°C and absorbent concentration of 2.5 mol/L, whereas desorption efficiency was 90% by heating for 3 h at 130°C. MEA was found to be an optimal absorbent for the purification process of CO₂ during gaseous production.     

考虑保护层响应的炼化过程系统风险动态转移模型

为适时、有效地控制炼化过程系统风险,以模糊Petri网(FPN)为基础,针对炼化系统动态退化性和系统中保护层对风险转移的干预性,建立考虑保护层响应的炼化过程系统风险动态转移模型。描述基于FPN的保护层作用动态机制,分析炼化系统在保护层干预下,从非正常干扰触发开始至炼化系统退化过程的风险变化趋势。最后通过正己烷缓冲罐案例分析验证模型。结果表明:正己烷缓冲罐在开始运行的30 000 h内,系统风险等级呈阶段性变化,在工作的前16 800 h,风险为Ⅰ级;第16 800~27 600 h,风险为Ⅱ级;第27 600~30 000 h,风险为Ⅲ级。     

Laboratory investigation of Waelz slag stabilization

Electric Arc Furnace dusts are considered hazardous waste due to their high heavy metals content (zinc, lead, etc.). The Waelz process is one of the most efficient technologies, in terms of capacity and quality, able to recover nearly the 90% of zinc contained in such EAF dusts. Unfortunately, the resulting slag still has eco-compatibility problems, although its mechanical and chemical properties are suitable for civil engineering applications. Stabilization tests, by quartz addition, were performed on EAF dusts in a laboratory furnace. Temperature, treatment time and cooling rate were varied in order to define the best conditions for regulating the formation of a stable microstructure able to hinder the release of substances. Microstructural characterization was carried-out using SEM and XRD analysis. Leaching tests were performed according to EN 12457-2 standards and water analyses were performed using ICP-OES. The best chemical stability was achieved when dust powders were mixed with 20% of silica and water-cooled.     

A study of the precursors leading to ‘organisational’ accidents in complex industrial settings

This study aggregates the narrative findings from the investigation of 12 accidents or ‘near hits’ across a wide range of industrial settings to build a catalogue of organisational and cultural precursors to accidents. It was found that many were important factors in multiple events. It is argued that by addressing these potential vulnerabilities using the findings and proposed tools based upon them, organisations undertaking safety related activities will not only develop greater awareness of these deeper-lying issues but should be able to better control the risks associated with them.The precursors have been classified under eight headings and examples of key findings from three of these are presented. Statements providing potential defences against the identified vulnerabilities have been developed which should enable organisations to scrutinise the adequacy of existing expectations or requirements within their business. Probing questions have been developed based on the statements which should allow an assessment to be made as to whether these have been ‘embedded’ in the organisation.It is argued that organisational vulnerability tools should be developed to enable a systematic approach to ‘diagnosing’ incubating precursors. It is also argued that there is the potential for further resilience to be achieved through the use of models of the complex dynamics of socio-technical processes within organisations.     

综合拉底、扩漏和出矿全过程的底部结构安全性颗粒流模拟技术研究

为探明自然崩落法从拉底崩落至出矿全过程中底部结构节理连续扩展过程与破坏过程规律，采用PFC2D软件，结合RocLab软件反演节理岩体参数，建立229 m×129 m的岩体扩大模型，对拉底崩落至出矿过程进行连续综合计算。研究结果表明:模拟结果及破坏现象与现场监测结果相近，建模与细观参数反演方法适用于该类岩体工程研究；裂纹扩展贯通导致岩体失稳破坏，破坏过程与裂纹扩展具有相对应的阶段特征，裂纹扩展分为崩落前稳定扩展期，崩落与聚矿槽开挖过程加速扩展期和后续持续扩展期；结构破坏分为蕴育过程，扰动失稳过程和宏观破坏过程；较大范围的宏观破坏主要在出矿阶段。该模拟方法与结果可为底部结构维护以及节理岩体长期稳定性研究提供参考。     

二氧化碳资源化技术研究进展

过量的二氧化碳(CO2)排放可导致温室效应的不断加剧,因此CO2减排受到越来越多的关注,其中将CO2转化为附加值较高的化工产品,即CO2资源化利用技术不仅可实现CO2减排,同时具有一定的经济效益。CO2资源化利用技术主要包括光化学还原法、电化学还原法和催化转移氢化法等。重点介绍并总结了以上3种方法的特点、优势和不足,指出未来需研究解决的关键问题和研究方向,为实现高效的CO2资源化利用提供借鉴和参考。     

交联剂TAIC反应风险评估分析

利用全自动反应量热仪和绝热加速量热仪等相关实验仪器检测出TAIC(三烯丙基异氰尿酸酯)合成反应的反应热、比热容及热稳定性等数据,依据绝热温升、工艺温度、技术最高温度、最大反应速率到达时间及失控体系可能达到的最高温度这5个温度参数按照评估标准从分解热、严重度、可能性、矩阵、工艺危险度这5个方面分别进行评估。通过对热参数及实验过程进行分析提出降低工艺危险等级的工艺优化方法。根据最终评估结果对TAIC生产装置的安全性进行评价,提出相应的整改措施及建议。