Photocatalytic degradation of the acetaminophen by nanocrystal-engineered TiO2 thin film in batch and continuous system

• Photocatalytic activity was improved in TiO₂ thin film by rapid thermal annealing. • Photoreactor was designed for TiO₂ thin film. • Considerable reusability and durability of prepared photocatalysts were studied. Un-biodegradable pharmaceuticals are one of the major growing threats in the wastewaters. In the current study, TiO₂ thin film photocatalysts were designed by nanocrystal engineering and fabricated for degradation of the acetaminophen (ACE) in a photocatalytic reaction under UV light irradiation in batch and continuous systems. The photocatalyst was prepared by sputtering and then engineered by thermal treatment (annealing at 300℃ (T300) and 650℃ (T650)). The annealing effects on the crystallinity and photocatalytic activity of the TiO₂ film were completely studied; it was found that annealing at higher temperatures increases the surface roughness and grain size which are favorable for photocatalytic activity due to the reduction in the recombination rate of photo-generated electron-hole pairs. For the continuous system, a flat plate reactor (FPR) was designed and manufactured. The photocatalytic performance was decreased with the increase of flow rate because the higher flow rate caused to form the thicker film of the liquid in the reactor and reduced the UV light received by photocatalyst. The reusability and durability of the samples after 6 h of photocatalytic reaction showed promising performance for the T650 sample (annealed samples in higher temperatures).     

环保型塑料产业进展

本文在持续跟踪环保型塑料产业动态的基础上,从原料开发、产品设计、废弃物回收利用等方面,综述了生物基和石油基环保型塑料产业的最新进展,旨在为塑料研发人员和相关产业工作者开拓思路。指出:环保型塑料是未来塑料产业发展的重要方向,非环保型塑料的市场份额将逐步被环保型塑料占据,最后稳定在较低的水平上。     

CS/PEG/PFT膜制备及对含铜废水的处理

实验将溶胶凝胶法和高分子辅助倒相法结合,制备出一种新型的壳聚糖/聚乙二醇/亚铁氰化钾钛(CS/PEG/PFT)复合膜,通过FT-IR和SEM对膜进行表征后,将其用于模拟铜废水的吸附和脱附实验,并探究出膜吸附的最佳工艺条件为:p H 5.50、实验温度55℃、实验时间2 h,该条件下,膜对铜离子最大吸附量为9.85 mg/g,去除率达到95%以上。CS/PEG/PFT膜的除铜过程符合Langmuir等温吸附方程(y=0.0597x+0.0168),线性相关度达到0.9917。     

废弃电子塑料在超临界异丙醇中的液化特性

研究了废弃含溴化阻燃剂的电子塑料在超临界异丙醇中的液化特性.研究结果表明塑料在超临界异丙醇中发生了解聚,产生油、气以及固体残渣,塑料中的溴化阻燃剂发生了脱溴降解.反应时间、固/液比、溶剂填充度对塑料解聚及阻燃剂脱溴降解影响较大,在最佳工艺条件(温度:400℃,反应时间:60min,固/液比:1/10,溶剂填充度:50%)下获得60%的产油率及95.3%的脱溴率.油以苯系物及酚类物质为主要组成物质,其热值为37.5MJ/kg.超临界异丙醇处理含溴化阻燃剂塑料主要包括溴化阻燃剂的萃取、脱溴降解和塑料高温解聚等过程.     

日用塑料制品中PBDEs的污染特征及其人体健康暴露风险

采用气相色谱/质谱联用仪和健康风险评价模型,研究了北京居民日常接触的典型日用塑料制品中PBDEs(多溴二苯醚)的赋存特征及其人体健康暴露风险.结果表明:1塑料盆、垃圾桶、塑料垫、塑料板凳、拖把、热水壶壳、给水管、采暖管、排水管、拖鞋、收纳箱、文件框等12种日用塑料制品中w(∑21PBDEs)为0.45~21.30 mg/kg,平均值为5.98 mg/kg.2日用塑料制品中十溴二苯醚是主要的PBDEs同系物,w(十溴二苯醚)平均占w(∑21PBDEs)的82.51%;九溴二苯醚是次要PBDEs同系物,平均占9.76%;三溴~六溴二苯醚质量分数较低,平均占1.77%,日用塑料制品生产过程中添加含十溴二苯醚的废弃阻燃塑料是引起PBDEs污染的主要原因.3成人通过呼吸吸入、皮肤接触和手-口3种途径摄入的PBDEs暴露量分别为295.77、44.29、0.00pg/(kg·d),儿童通过3种途径的PBDEs暴露量分别为769.55、40.83、1.91 pg/(kg·d)表明呼吸吸入是主要暴露途径.4日用塑料制品中PBDEs对成人和儿童的释放暴露非致癌危害熵分别为2.28×10-4和5.46×10-4,低于美国标准中可接受风险熵(1.0),表明日用塑料制品中PBDEs对人体的健康风险影响很小.     

消费电子产品生产过程中挥发性有机物(VOCs)排放特征的研究

选取塑胶零件、印刷线路板及主板3类消费电子产品部件为研究对象,利用活性炭管采样,样品溶剂解吸后采用GC/MS分析,获得了各排气筒及车间内VOCs含量水平与组分特征.通过计算排放量,得出了分物种VOCs排放系数.结果表明,塑胶零件生产线排气筒总挥发性有机物(TVOCs)浓度为48.01~115.05 mg·m-3,印刷线路板为6.08~11.36 mg·m-3,主板为29.81~30.21 mg·m-3.塑胶零件生产车间内TVOCs浓度为4.23~120.58 mg·m-3,印刷线路板为1.50~2.02 mg·m-3,主板为7.01~9.93 mg·m-3.环烷烃类、酯类、苯类为主要排放物质.对于不同产品生产线的排气筒及车间废气,浓度和物种均有很大差异;对于相同产品,浓度有差异但物种基本相同.按产品分类,共计算得出了36个分物种VOCs排放系数,其中,塑胶零件、印刷线路板及主板TVOCs排放系数分别为0.626 kg·kg-1涂料用量、0.123 kg·kg-1油墨用量、0.028 kg·kg-1印刷线路板用量.通过排放量计算结果分析,3种产品中,塑胶零件生产为VOCs主要排放源,车间内无组织排放为主要排放方式.     

降膜对喷淋塔吸收特性的影响

吸收液在喷淋塔内以液滴和降膜两种形式存在,为了深入考察降膜对喷淋塔吸收特性的影响,以多孔分布板代替传统的压力式喷嘴,实现了降膜和液滴流量的可控调节,结合喷淋塔流体力学特性和双膜理论,建立了液滴及降膜的传质模型,并进行了试验验证,通过定量计算,分别考察了喷淋量及空塔气速对降膜吸收速率分率的影响.结果表明:所建模型可以较好地模拟喷淋塔脱氨过程,相对误差小于4％;降膜吸收速率分率几乎不随空塔气速而变化,但随喷淋量增大而减小;当大量吸收液在塔内壁形成降膜时,要达到相同吸收率所需喷淋液量将更大.     

地表载荷对硬岩区埋地管道应力应变影响分析

为研究地表载荷对硬岩区埋地管道力学性能的影响,建立了管-土耦合三维数值模型,分析了地表载荷大小、作用面积、管道压力、管道径厚比及回填土弹性模量对管道应力分布、塑性应变、椭圆度的影响。结果表明:地表压载作用下,高应力区首先出现在管道顶部且呈椭圆形;随着地表载荷及其作用面积的增大,管道高应力区逐渐扩大,管道截面左右两侧也出现应力集中;随着回填土弹性模量、管道壁厚及内压的增加,管道顶部高应力区及最大等效应力均减小。塑性应变首先出现在管顶,且塑性区随地表载荷、载荷作用长度增加而增大,随回填土体弹性模量及管道壁厚增大而逐渐减小;当内压为0~4MPa时,管道塑性应变及塑性区随内压的增大而减小。管道椭圆度随回填土体弹性模量、管道内压、壁厚增加而逐渐减小,随地表压载增大而增大。     

Climate change,adaptation and Eco-Art in Singapore

Eco-Art has recently emerged as a potential means to place emphasis on environmental issues such as climate change, recycling and the metabolism of the city experienced both materially and conceptually within local, regional and global contexts. Such art presents the possibility of shaping civic practices in arenas beyond those of traditional planning domains. Adopting a pragmatic approach, which recognises the contextual pluralism that exists in debates regarding climate change, this paper is interested in how Eco-Art projects encourage the re-imagining of urban spaces within the context of sustainability, and flows of materials and the recycling of plastic in art specifically.     

Green Screen or Smokescreen? Hollywood's Messages about Nature and the Environment

This paper examines ideologies about nature and the environment in popular, animated Hollywood films—including The Lorax, Wall-E, and Ice Age 2—through a symptomatic reading. The primary goal of the analysis is to elucidate key omissions in these texts through an assessment of the problematic—defined in this research as an a-priori answer to perceived audience concerns regarding the role of consumerism and corporate culture in environmental problems. Silences in the films revolve around: how environmental problems are defined; what the consequences are; who the responsible parties are; and what potential solutions exist to mitigate them. The significance of the research is underscored by the formation of an increasingly intimate relationship between children, consumer culture, and commercial media in the USA, as well as the increasingly dire information emerging about global environmental issues. This analysis reveals the dual, often conflicting, messages that commercial film provides for its young audiences about pivotal environmental problems and their potential resolution.