Inherent thermal runaway hazard evaluation method of chemical process based on fire and explosion index

Thermal runaway hazard assessment provides the basis for comparing the hazard levels of different chemical processes. To make an overall evaluation, hazard of materials and reactions should be considered. However, most existing methods didn't take the both into account simultaneously, which may lead the assessment to a deviation from the actual hazard. Therefore, an integrated approach called Inherent Thermal-runaway Hazard Index (ITHI) was developed in this paper. Similar to Dow Fire and Explosion Index(F&EI) function, thermal runaway hazard of chemical process in ITHI was the product of material factor (MF) and risk index (RI) of reaction. MF was an indicator of material thermal hazards, which can be determined by initial reaction temperature and maximum power density. RI, which was the product of probability and severity, indicated the risk of thermal runaway during the reaction stage. Time to maximum rate under adiabatic conditions and criticality classes of scenario were used to indicate the runaway probability of the chemical process. Adiabatic temperature rise and heat of the desired reaction and secondary reaction were used to determine the severity of runaway reaction. Finally, predefined hazard classification criteria was used to classify and interpret the results obtained by this method. Moreover, the method was validated by case studies.     

Misoperation monitoring and early warning during startup and shutdown of petrochemical units

Most petrochemical units run under extreme conditions, such as high temperatures, pressures, and speeds. Consequently, the equipment operators may commit errors because the startup and shutdown processes usually involve complicated operation steps; moreover, the operators may lack experience in handling abnormal situations. Misoperation can lead to accidents, including fires and explosions. Thus, risk analysis for process operations and the development of preventive measures have become an effective means of avoiding misoperation-related accidents. However, it is challenging to ensure the comprehensiveness of risk-analysis results. In this paper, we present a method for misoperation monitoring and early warning in the startup and shutdown processes of petrochemical units. The mechanisms of misoperation occurrence are summarized based on investigations of serious accidents in the recent past. Knowledge regarding the mechanisms of misoperation is crucial for the risk analysis of petrochemical units. The potential risk information, such as causes, adverse consequences, key monitoring parameters, and prevention control solutions, should be acquired and be employed to construct an early-warning knowledge database. Furthermore, misoperation judgment rules need to be formulated to identify misoperations. The data obtained from the monitoring module, misoperation judgment rules, and analysis results can aid in developing schemes to avoid possible abnormal situations. This paper reports a misoperation monitoring and early-warning system for a hydrogenation unit. As demonstrated, conducting risk analysis to determine the potential operational risks and formulating misoperation judgment rules to analyze the process data are essential for enabling early warning. The application of this method will contribute to operational guidance, economic loss reduction, and accident avoidance.     

安全信息认知对心理安全感的作用机理研究

为揭示安全信息认知对员工心理安全感的影响，把握信息时代背景下心理安全感的研究趋势。基于安全信息认知的背景与特征，构建心理安全感的安全信息认知流程模型。通过描述安全信息对心理安全感的影响机理，从需要、动机、意识、期望剖析心理安全感的安全信息认知动力，归纳心理安全感的安全信息认知偏好，并从风险管控、安全氛围、安全管理落地、安全防护措施设计、员工安全生产积极性方面论述心理安全感在企业的应用对策。研究表明，员工安全信息认知对其心理安全感具有重要影响，是引起心理安全感波动的关键因素，也为心理安全感在企业的应用提供指导。     

空气污染天气过程与气象要素之间的关联性分析

随着经济和社会的不断发展,地球的环境正在遭受着严重的侵害,关于环境的问题也日益显现出来,比如全球变暖、雾霾等现象。本文分析了空气污染的因素、气象要素对空气质量的影响,并提出了防治空气污染的对策。     

污水处理厂设备维护管理优化研究

以JL污水处理厂设备管理优化过程为例,充分吸取LCC,TPM中的先进思想,以设备运行可靠性及设备维护经济性为追求目标,建立了设备管理优化体系。流程体系上,通过建立作业指导文件,建立标准化维修程序,对于操作过程及时进行记录,建立可视化、可追溯的管理方法;指标体系上,根据设备重要性及运行状况,确定设备风险指数,分级管理;建立控制指标,并动态调整;管控体系上,建立设备“户口”,对设备的维护、保养、使用等信息进行全面登记;考核设备维护的全面性、及时性、可靠性、合规性;重视设备维护的预计与预警;技术体系上,通过设备监测仪器的使用,对设备运行状况定量化。通过不断推进设备预防性维护工作,设备完好率不断提升,仪表完好率从2016年的97.34%,96.55%水平,分别提升至99.08%,98.72%;维护费用也保持在较低水平,检修费与资产比例在实施的前两年分别降至1.49%,0.85%,实现了污水处理厂节能降耗及运行可靠性的强化。     

走向工作面贯通上山与支架快速回撤技术

针对走向工作面停采线与上山之间的护巷煤柱造成煤炭损失，支架回撤工艺复杂、巷道掘进量大等问题，提出走向工作面贯通上山与支架快速回撤技术。工作面贯通采区上山，利用上山回撤支架。在贯通前，利用压力拱模型分析剩余煤柱应力变化规律，并结合极限平衡区公式，确定让压煤柱为8 m；对贯通前基本顶合理断裂位置、让压调节机制、末采阶段采高进行了分析确定，并采取上山巷内补强支护及挂绳铺网措施。贯通上山后，首先利用支架对上山留巷，完成留巷后，利用上山回撤支架，先将上部端头3架逆时针旋转90°作为掩护架，在对剩余支架逐架回撤时，3个掩护架呈现台阶型。提出的技术取消了护巷煤柱及回撤通道，提高了煤炭采出率，减少了巷道掘进量，简化了回撤工艺。     

农村生活污水深度处理适用技术

农村污水治理是改善农村人居环境的重要内容之一,介绍了3种适用于农村水质敏感地区的污水处理技术:间歇曝气活性污泥法、生态处理技术、膜生物法,并对3种污水处理技术的优缺点进行了比较分析。     

江苏省水质全要素代表性监测体系的设计

为了评价并进行城市水环境质量考核排名,介绍了江苏省组织开展涵盖地表水、饮用水、地下水、近岸海域和城市内河5种类型"全要素、代表性"水质监测断面(点位)体系建设工作的情况以及全要素断面设置的基本原则和做法。分苏南、苏北、苏中3个区域,对全省地表水监测代表性进行了量化计算,结果表明,调整后全省水质综合指数极差从41.07降至7.17,标准差从3.16降为0.49;采用德尔斐层次分析法分析,设计了水质代表性指数,含1项一级指标、5项二级指标、12项三级指标,计算表明,调整前全省水质代表性指数得分为69.1分,调整后为88.7分。将调整结果进行论证后再与各市环保主管部门交换意见,取得最终一致后正式实施。     

基于平衡计分卡的大气环境监测数据共享网站绩效评估研究

基于平衡计分卡原理,结合网站特点,建立了大气环境监测数据共享网站绩效评估模型。以共享网站的战略愿景为模型框架的中心,以财务、顾客、内部程序、学习与成长等4个基本维度为一级指标,构建了绩效评估指标体系,并采用层次分析法确定了各指标的权重。利用该模型对长三角区域空气质量预测预报系统和宁波市空气质量预报预警平台的大气数据共享模块进行实证研究,绩效评估结果均为良好。     

Laboratory investigation of Waelz slag stabilization

Electric Arc Furnace dusts are considered hazardous waste due to their high heavy metals content (zinc, lead, etc.). The Waelz process is one of the most efficient technologies, in terms of capacity and quality, able to recover nearly the 90% of zinc contained in such EAF dusts. Unfortunately, the resulting slag still has eco-compatibility problems, although its mechanical and chemical properties are suitable for civil engineering applications. Stabilization tests, by quartz addition, were performed on EAF dusts in a laboratory furnace. Temperature, treatment time and cooling rate were varied in order to define the best conditions for regulating the formation of a stable microstructure able to hinder the release of substances. Microstructural characterization was carried-out using SEM and XRD analysis. Leaching tests were performed according to EN 12457-2 standards and water analyses were performed using ICP-OES. The best chemical stability was achieved when dust powders were mixed with 20% of silica and water-cooled.