Coat color polymorphism in populations of the northern mole vole in the Ural Region

Collections made in the course of long-term field studies on ecology of the northern mole vole Ellobius talpinus Pall. in the Ural Region and neighboring areas (more than 2000 individuals from 24 points of the species range) were used to analyze geographic variation in its coat color (color morphs). On the basis of long-term observations (1985–1999) on marked animals from a polymorphic population (Kurtamyshskii raion, Kurgan oblast), the life spans of males and females and the dependence of life span on population density and structure were estimated in animals of different color morphs. Each color morph of E. talpinus was shown to have specific features of the seasonal dynamics of age structure and migrations.     

Fluctuations of Population Size and Structure in the Northern Mole Vole: Preliminary Analysis

Long-term stationary studies on the ecology of the northern mole vole (Ellobius talpinus Pall.), performed by the mark–recapture method from 1985 to 1997, have provided original data on population dynamics and structure. The analysis shows that, to reveal cyclic fluctuations of population size in this species, the period of three years should be taken as a unit of time for estimating the duration of one phase. The 12-year population cycle in E. talpinus has four distinct phases: an increase, a peak, a decline, and a minimum. At each phase, the population is characterized by certain features of family structure, age composition, birth and death rates, and the composition of migrants.     

基于维纳过程的MEMS陀螺仪贮存寿命评估

目的 针对MEMS陀螺仪在步进应力加速试验条件下获取的性能退化数据,提出基于维纳过程的贮存寿命评估方法及其模型准确度检验方法。方法 首先,确定温度为影响MEMS陀螺仪性能退化的主要环境因素,采用步进温度应力加速试验的方式获取其性能退化数据。其次,分析各项性能参数的演变规律,确定标度因数为表征产品性能退化的特征性能参数。最后,采用漂移维纳过程对标度因数退化轨迹进行建模,并外推得到常温条件下的贮存寿命。结果 采用留一法对模型精度进行验证,模型准确度最低为86.44%。可靠度水平为0.95时,常温贮存(25 ℃)条件下的寿命评估结果为50.02 a。结论 基于维纳过程建立的性能退化模型的准确度在85%以上,该模型可应用于指定贮存条件下MEMS陀螺仪的性能退化预测及贮存寿命评估。     

长时间高温热环境考核试验中石英灯阵的破坏及预防

目的 解决220 V-6 kW石英灯管阵列在试件表面1200 ℃持续40 min以上试验过程中的热破坏问题。方法 对灯管破坏形貌进行分析,通过热应力计算找到了爆灯的主要原因。针对现有加热器灯阵中灯头部位的热结构问题设计一套气体强制对流冷却装置,利用流体仿真分析方法获得出气管上不同出气孔孔径在相同间距条件下的气流速度、出气管外空流场状态和有灯阵时的灯头绕流冷却效果,为结构设计提供依据。结果 在相同地面热环境模拟试验中成功进行了考核试验。对比有无冷却装置时的试验结果,对流换热装置能够增加灯管使用寿命,保证试验质量。结论 针对灯头部位进行强制对流保护的方法,能够提高加热器在试验过程中的热环境模拟温度上限和有效试验时间,对高温长时间类热环境试验具有较好的应用和推广价值。     

Law of variation for low density polyethylene dust explosion with different inert gases

To reveal the effects of different inert gases on explosion characteristics during low density polyethylene (LDPE) dust explosion and optimize the explosion-proof process, eight N₂ (CO₂)/air mixed inerting conditions were experimentally studied. Typical inerting conditions with 12 L cylindrical explosive tank were used to study the characteristics on the flame propagation. The thermogravimetric analysis with related theories were used to further explain the mechanism and quantities in low density polyethylene (LDPE) dust explosion with different inert gases. The results showed that the reduction of O₂ concentration could effectively delay the progress of flame growth process and weaken the effect of dust combustion reaction. The flame growth process of condition (N₂/air (18% O₂)) was 2.05 times slower than that of the non-inert condition. The explosion strength was obviously reduced, and the characteristic parameters such as explosion pressure and flame propagation speed were also affected by the decrease of O₂ concentration. For LDPE powder, the smaller the median diameter, the greater the explosion intensity and the lower the limiting oxygen content (LOC). The LOC with CO₂ was usually higher than that with N₂ and the effect of CO₂ was significantly better than N₂ in inerting.     

不同含水率煤尘在瓦斯爆炸诱导下爆炸传播规律研究

为了探究不同含水率煤尘在瓦斯爆炸诱导下的爆炸传播规律,利用自行搭建的直管瓦斯爆炸诱导煤尘二次爆炸实验系统,从冲击波压力和火焰传播速度2个方面,研究了不同含水率沉积煤尘在瓦斯爆炸诱导下的爆炸传播规律和原因。研究结果表明:当煤尘含水率小于40%时,管道内沉积煤尘会在瓦斯爆炸诱导下产生二次爆炸,同时沉积煤尘总量一定时,沉积煤尘二次爆炸产生的冲击波超压峰值和火焰传播速度随着煤尘含水率的增加先增大后减小;当沉积煤尘含水率为20% 时,煤尘二次爆炸产生的冲击波超压峰值、火焰传播速度峰值达到最大值,分别为1.657 MPa和468.060 m/s;当沉积煤尘含水率大于40%时,沉积煤尘无法产生二次爆炸,此时爆炸产生的威力小于单一瓦斯爆炸,火焰传播速度衰减较无煤尘的瓦斯爆炸更快,沉积煤尘起到抑制瓦斯爆炸传播的作用。研究结果可以为防治煤尘二次爆炸提供理论依据。     

开敞空间可燃气云爆炸冲击波超压及灾害动力响应研究评述

为了进一步梳理和分析开敞空间可燃云爆炸冲击波超压传播规律及灾害动力响应方面的各项研究成果,推进可燃气体爆炸安全防控,减少人员伤亡和经济损失。在分析现有研究的基础上,总结开敞空间可燃气云爆炸冲击波超压传播规律及灾害动力响应研究等方面存在的不足,提出开敞空间多元混合气体爆炸冲击波超压传播规律研究、多影响参数下可燃气云爆炸冲击波超压传播规律定量分析、基于可燃气云爆炸冲击波超压作用下的承载体动力响应等未来研究的关键技术问题。     

含热熔孔洞缺陷的埋地聚乙烯管道应力分析及寿命预测

为了研究聚乙烯（PE）管道热熔孔洞缺陷与寿命之间的关系,基于Ansys软件对埋地状态下的含有热熔孔洞缺陷的PE管道进行应力分析,得到了含热熔孔洞缺陷的PE管道在不同内压下的最大Mises应力、环向应力和径向应力的变化数据;依据应力分析数据,使用Matlab编写程序,根据Suleiman双曲本构模型对PE管道进行了寿命预测。研究结果表明:含有热熔孔洞缺陷的PE管道,其最大应力随管道内压的增大而增大,寿命随着管道内压和缺陷体积的增大而减少,含缺陷管道寿命和内压关系可使用双对数函数来进行描述;使用应力分析和寿命预测相结合的方法,可以得到不同缺陷的PE管道寿命-内压关系式。