异戊醇低压热解的同步辐射真空紫外光电离质谱研究

作为新兴生物燃料,大分子醇类燃料在低压下的火灾安全基础迫切需要得到深入研究。热解过程作为火灾过程的初始阶段直接控制着火过程,火灾中碳烟颗粒的产生也依赖于热解反应,因此可燃物的低压热解研究在其低压火灾基础研究中具有重要意义。利用同步辐射真空紫外光电离质谱方法研究了异戊醇在0.2atm下的流动反应器热解,探测到了20余种热解产物,包括烯丙基自由基和C_4H_8O、C_5H_8、C_6H_6等同分异构体,并测量了其摩尔分数。基于实验结果,对燃料分解路径和主要产物的生成及消耗路径进行了探讨。与本组之前正戊醇热解实验的对比表明,由于存在支链结构,异戊醇在热解中比正戊醇更容易产生戊烯、丁烯和丙烯,但更少地产生乙烯。此外,异戊醇在热解中能够生成更多的丙炔和丙二烯等环状化合物前驱体,令其苯和1,3-环戊二烯的生成量更高,表明异戊醇比正戊醇更易于生成多环芳烃和碳烟。     

裂解温度和离子强度对不同来源生物炭胶体释放行为的影响

近年来环境中生物炭胶体形成受到广泛关注,它是生物炭在环境中物理分解作用的重要过程,对污染物迁移有着重要影响.然而,目前对生物炭胶体释放过程和影响因素的研究甚少,人们对生物炭胶体释放机理的认识还很有限.本研究以小麦秸秆和花生壳为生物质来源,系统地探讨了生物炭的裂解温度（300~700 ℃）和溶液离子强度（0.1~10 mmol·L^-1）对生物炭胶体产率的影响.结果表明,随着裂解温度的升高,生物炭的耐磨性增强,且在较高的裂解温度下（≥500 ℃）花生壳生物炭的耐磨性显著强于小麦秸秆生物炭.生物炭的胶体产率受到生物质来源和裂解温度的显著影响,花生壳生物炭的胶体产率低于小麦秸秆生物炭,高温裂解（≥600 ℃）生物炭的胶体产率显著低于中低温裂解生物炭.在相同溶液离子强度下,生物炭胶体产率与其亚微米级碎片率呈显著正相关（p<0.05）,即生物炭中亚微米级碎片率越高,生物炭胶体产率越高.当溶液离子强度从1 mmol·L^-1增加到10 mmol·L^-1时,两种来源生物炭的胶体产率均显著降低,其降低的程度因生物炭裂解温度而异,其中低温裂解（300 ℃）生物炭的胶体产率降低了11.1%~11.2%,中高温裂解（≥ 500 ℃）生物炭的胶体产率降低了60.0%~97.2%.     

Algal toxicity induced by effluents from textile-dyeing wastewater treatment plants

This research aimed to evaluate the alga Scenedesmus obliquus toxicity induced by textiledyeing effluents(TDE).The toxicity indicator of TDE in alga at the physiological(algal growyth),biochemical(chlorophyll-a(Chl-a) synthesis and superoxide dismutase(SOD) activity) and structural(cell membrane integrity) level were investigated.Then we further study the relationship among toxicity indicators at physiological and biochemical level,and supplemented by research on algal biomacromolecules.According to the analysis of various endpoints of the alga,the general sensitivity sequence of toxicity endpoints of Scenedesmus obliquus was:SOD activity Chl-a synthesis algal growth.The stimulation rate of SOD activity increased from day 3(57.25%～83.02%) to day 6(57.25%～103.81%),and then decreased on day 15(-4.23%～-32.96%),which indicated that the antioxidant balance system of the algal cells was destroyed.The rate of Chl-a synthesis inhibition increased gradually,reaching19.70%～79.39% on day 15,while the rate of growth inhibition increased from day 3(-12.90%～10.16%) to day 15(-21.27%～72.46%).Moreover,the algal growth inhibition rate was positively correlated with the inhibition rate of SOD activity or Chl-a synthesis,with the correlation coefficients were 0.6713 and 0.5217,respectively.Algal cells would be stimulating to produce excessive reactive oxygen species,which would cause peroxidation in the cells,thereby destroying chloroplasts,inhibiting chlorophyll synthesis and reducing photosynthesis.With increasing exposure time,irreversible damage to algae can lead to death.This study is expected to enhance our understanding of the ecological risks through algal tests caused by TDE.     

氧基氯化铁非均相活化过一硫酸盐降解金橙Ⅱ

采用部分热分解法制备了氧基氯化铁（FeOCl）,用于活化过一硫酸盐（PMS）降解难降解偶氮染料金橙Ⅱ（AO7）.利用X射线光电子能谱分析（XPS）、扫描电镜（SEM）和X射线衍射光谱（XRD）对其进行了表征;通过实验评估FeOCl/PMS体系对AO7的降解效果并分析了影响AO7去除率的各种因素.结果表明：FeOCl活化PMS降解AO7效果良好,矿化率达44%.在中性条件下,当FeOCl投加量50mg/L、PMS浓度1.0mmol/L、AO7浓度0.05mmol/L时,AO7可在30min内完全降解.随PMS投加量、FeOCl投加量、Cl^-浓度和反应初始pH值的增大,AO7的脱色效果提高.FeOCl还具有良好的重复利用性.此外,通过自由基淬灭实验、EPR测试和XPS分析了反应的主要活性物种和反应机理：由PMS活化产生的SO₄^-·和·OH对污染物进行降解,其中主要活性物种为SO₄^-·.     

Pyrolysis of rice husk and sawdust for liquid fuel

The paper is focused on studying how to convert rice husk and sawdust into liquid fuel. Rice husk, sawdust and their mixture were pyrolyzed at the temperature between 420℃ and 540℃, and the main product of liquid fuel was obtained. The experimental result showed that the yield of liquid fuel heavily depended on the kind of feedstock and pyrolysis temperature. In the experiments, the maximum liquid yields for rice husk, sawdust and their mixture were 56% at 465 ℃, 61% at 490℃ and 60% at 475℃ respectively. Analysis with GC-MS and other apparatus indicated that the liquid fuel is a complicated organic compound with low caloric value and can be directly used as fuel oil without any up-grading. As a crude oil, the liquid fuel can be refined to be vehicle oil.     

四氟乙烯清洁生产工艺和污染控制

分析了传统空管裂解生产四氟乙烯工艺存在的污染问题 ,介绍了水蒸汽稀释裂解生产四氟乙烯工艺的污染控制情况。     

Cobalt in alluvial Egyptian soils as affected by industrial activities

ＩｎｔｒｏｄｕｃｔｉｏｎＩｎｎａｔｕｒｅＣｏｏｃｃｕｒｓｉｎｔｗｏｏｘｉｄａｔｉｏｎｓｔａｔｅｓ ,Ｃｏ2 + ａｎｄＣｏ3+ ,ａｎｄｆｏｒｍａｔｉｏｎｏｆｔｈｅｃｏｍｐｌｅｘａｎｉｏｎＣｏ(ＯＨ) - 3 ｉｓａｌｓｏｐｏｓｓｉｂｌｅ .ＤｕｒｉｎｇｗｅａｔｈｅｒｉｎｇＣｏｉｓｒｅｌａｔｉｖｅｌｙｍｏｂｉｌｅｉｎｏｘｉｄｉｚｉｎｇａｃｉｄｅｎｖｉｒｏｎｍｅｎｔ,ｂｕｔｄｕｅｔｏａｈｉｇｈｓｏｒｐｔｉｏｎｂｙＦｅａｎｄＭｎｏｘｉｄｅｓ,ａｓｗｅｌｌａｓｂｙｃｌａｙｍｉｎｅｒａｌｓ,ｔｈｉｓｍｅｔａｌｄｏｅｓｎｏｔｍ…     

石英表面配合物与溶解动力学模型

阐述了石英表面配合物和溶解动力学机理之间的关系，指出了石英的反应性主要受负电性表面物种的控制，从而导致电解质、离子强度、pH等因素对石英溶解的催化效应．溶解达率的提高与反应活化能的降低成活化熵的增大有关。最后，介绍了在过渡态理论和表面反应模型基础上建立的石英溶解速率方程。     

城市生活垃圾热解产气特性的试验研究

在外热式固定床试验台上,针对城市生活垃圾中的典型组分,进行了不同条件下的热解试验研究。试验测量不同条件下产物的产气量和产气速率,分析了热解气的组分和气体热值。分析发现,物料的挥发分、加热方式以及热解终温等对产气影响大,随温度的增加产气中H2含量逐渐增多,C2H4和C2H6的含量逐渐下降,气体热值有一个最大值。     

模拟医疗废物在管式电阻炉上的热解特性研究

在管式电阻炉上对由聚丙烯、面巾纸、纱布、医用脱脂棉、一次性口罩、医用乳胶手套等按一定比例组成的模拟医疗废物在氮气气氛进行了热解研究。重点探讨了10K／min，20K／min，30K／min和40K／min等不同升温速率对热解产物分布、产气特性和热解过程的影响。结果表明，随着温度升高，模拟废物的热解产生气体的主要成分逐渐由CO2和CO转变为C3H6、CH4、C2H6、C2H4和C3H8。同时，热解处理对模拟废物的减量化效果比较明显，固体残留率仅为5．61％～7．02％。而且，加热速率对模拟医疗废物热解过程的影响较大。