Analysis of crater formation in buried NG pipelines: A survey based on past accidents and evaluation of domino effect

The formation of a crater by the abrupt and catastrophic rupture of a high-pressure pipeline can be highly relevant, especially when the crater uncovers other pipelines, which could undergo a domino effect with a significant increase of the consequences on people or on the environment. However, this scenario has been only partially studied in the literature. To assess the influence of the pipeline parameters on the dimensions of the resulting crater, a statistical analysis of accidental ruptures of buried natural gas pipelines that have involved the formation of a crater was carried out. Mathematical expressions are proposed to describe the proportionality relationships found, which can be very useful to support adequate separation distances in the design and construction of parallel corridors of pipelines after appropriate escalating effects are considered. Finally, detailed event trees were developed to calculate the probability of occurrence of the final outcomes, as well as the identified domino sequences, based on a qualitative and quantitative analysis of the data. The study of these accident scenarios, based on actual cases, represents a useful and needed advance in risk analysis of natural gas transportation through pipelines.     

北京市典型废弃物焚烧源2010—2017年二NFDA1英排放特征和减排效果分析

分析2010—2017年北京市三类典型废弃物焚烧源的废气二NFDA1英排放监测数据,计算排放因子和排放量,评估减排政策成效,并分析不同排放源达标排放时同类物分布特征异同和变化规律,探讨影响排放的重要因素。结果表明: 5家焚烧源平均排放浓度为 0.008～0.069 ng/m³(以TEQ计,下同),废气二NFDA1英排放因子为 0.027～1.7 μg/t,2016年向空气中排放的二NFDA1英量为 0.002 5～0.058 g；生活垃圾、危险废物和医疗废物焚烧源的低、高氯代同类物质量分数比的平均值分别为接近于 0.5、大于0.5和小于0.5,危险废物焚烧源的 ∑PCDFs、∑PCDDs质量分数比的平均值大于2； 123478-HxCDF和123678-HxCDF质量浓度接近且线性相关,具有相近的生成机理和去除效率； I-TEQ变化趋势与∑PCDFs质量分数的变化趋势基本一致,活性炭喷射和布袋除尘的去除效率是影响二NFDA1英排放的重要因素之一；危险废物焚烧源HWI1随运行时间增加排放浓度增加,而及时更换烟道管壁有助于消除“记忆效应”的不良影响。     

重金属汞对海洋底栖动物毛蚶和紫贻贝毒性效应研究

本文基于我国近海典型底栖双壳类生物毛蚶、紫贻贝急性和慢性毒性效应实验数据，分析了重金属汞对受试生物体质量、体长及消化腺超氧化物歧化酶(superoxide dismutase, SOD)酶活力的影响，获取了无观察效应浓度(No Observed Effect Concentration, NOEC)，并以生存率为反应终点分析计算了重金属汞的非检测毒性效应浓度及半致死浓度。结果表明，各实验组SOD酶活力的组内方差与组间方差的差异整体上并不显著(P > 0.05)，实验周期内仅在个别时间处理组间存在显著性差异(P < 0.05)；实验周期内毛蚶和紫贻贝体质量、体长的组内方差与组间方差并没有显著性差异(P > 0.1)，体长及体质量不适合作为毒性效应的评价终点。重金属汞对毛蚶、紫贻贝的非检测毒性效应浓度分别为23.7 μg·L-1、87.8 μg·L-1，半致死浓度分别为683.4 μg·L-1、773.2 μg·L-1。     

4种营养元素对水华鱼腥藻和四尾栅藻增殖的影响

以水华鱼腥藻和四尾栅藻分别作为蓝藻,绿藻代表藻种,采用均匀设计实验方法(uniform design experimentation,UDE)设计藻类AGP实验。采用通径分析法(Path Analysis,PA)对氮、磷、铁和锰在不同藻种增殖过程中的影响程度进行分析。结果表明,4种营养元素对水华鱼腥藻增殖影响的决策排序为FeTNTPMn,微量金属元素铁是影响水华鱼腥藻(蓝藻)增殖的主要因素;对四尾栅藻增殖影响的决策排序为TNTPFeMn,常量元素是影响四尾栅藻(绿藻)增殖的主要因素。联合通径分析法和逐步二次方回归分析法(QRA)建立的数学模型,可用于预判藻增殖。     

聚硅酸钛制备及其助凝特性

采用在活化硅酸制备过程中加入适量Ti Cl4的方法,试制了一种新型无机高分子助凝剂—聚硅酸钛。研究了不同[Si]/[Ti]条件下制备的聚硅酸钛在固定p H值的水中分散物的粒径和Zeta电位随着活化时间的变化趋势,并与活化硅酸作比较。结果表明,在Si/Ti=20,活化48 h的条件下能制备出较为稳定的聚硅酸钛。与活化硅酸相比,聚硅酸钛在水中的分散物具有较大的粒径和更高的Zeta电位。通过对比制备的活化硅酸和聚硅酸钛的红外图谱发现,聚硅酸钛中有TiO-Si键,证明钛离子参与了聚合反应,新生成的化学键提高了它的聚合度和稳定性。采用硫酸铝为混凝剂,聚硅酸钛为助凝剂进行混凝除浊实验。测定了絮凝体的Zeta电位和混凝沉淀后的上清液浊度,研究了硫酸铝投加量和混凝p H对聚硅酸钛助凝效果的影响。结果表明,投加适量的聚硅酸钛助凝剂,明显提高了混凝除浊效果且拓宽了有效混凝p H值的范围。     

基于情感思维的安全管理模式研究

为促进安全管理，提高效率与效果，对基于情感思维的安全管理进行研究，将情感思维融于安全管理，基于情感思维的定义、内涵及功能，具体分析安全管理中情感思维的功能及其功能综合作用，建立安全管理中情感思维功能作用理论模型；根据该理论模型分析情感思维驱动力及强化作用及其对安全目标实现的影响；建立基于情感思维的安全管理设计模式，最后提出优化安全管理的措施与方法，以促进安全管理的实施。研究表明:基于情感思维的安全管理研究，能较好地体现安全管理人本原理，发挥情感的能动作用，将理性融入其中与情感进行平衡，实现安全管理的优化。     

化学环境下的应力-渗流耦合对尾 矿库稳定性影响试验

通过扫描电镜（FE-SEM）、能谱分析（EDX）、X射线衍射（XRD）、LMS-30激光粒度分析等室内试验探究了尾矿库内存在的酸、碱离子对尾矿颗粒的沉降、微观形貌、物质组成以及粒径级配的影响；建立酸、碱影响下的孔隙比与渗透系数的数学关系模型，并将建立的模型用来表征尾矿库内的应力渗-流场两场耦合机制，实现代入有限元计算软件的目的。结果表明:化学因素的存在影响着尾矿颗粒的多项性状，酸性环境下尾矿颗粒发生溶蚀，部分金属元素流失；碱性环境下尾矿颗粒间生成胶结物质，孔隙出现以含氢氧化铁为主的絮状、团簇状堵塞物，改变了渗流速度；尾矿库内浸润线高度在碱性、中性、酸性环境下依次降低，而渗流速度依次升高。     

石墨相氮化碳协同UV-H_2O_2光催化降解亚甲基蓝

以三聚氰胺为前驱体,经热解—回流法制备了石墨相氮化碳(g-C3N4),采用XRD、FTIR、SEM、EDS、PL等技术对g-C_3N_4进行了表征。研究了g-C_3N_4在UV-H_2O_2体系中对废水中亚甲基蓝(MB)的光降解效果。实验结果表明,UV+g-C_3N_4催化剂+H_2O_2体系能协同降解MB,在初始MB质量浓度为20 mg/L、初始废水p H为5、废水体积为250 mL、g-C_3N_4加入量为0.10 g、H_2O_2浓度为0.4 mmol/L、反应温度为25℃的优化工艺条件下,紫外光照射70 min时MB脱色率达98.32%。g-C_3N_4催化剂具有较好的重复使用性能,使用5次后MB脱色率仍保持在95.10%。     

提高电捕焦油器安全生产运行的措施

简要叙述了电捕焦油器开工以来存在的问题,对电捕捕焦油器不能安全稳定运行的原因进行了分析,并采取改进措施。实践证明,改进工艺技术合理,方法可行,电捕焦油器运行效果达到指标要求。     

Usage of polystyrene disposable food dishes in the lightweight concrete making

The increasing use and subsequent accumulation of polystyrene containers has triggered a substantial environmental problem. This study investigated using varied percentages of solid waste polystyrene disposable food dishes in the production of lightweight concrete samples with 350 kilograms per cubic meter (kg/m³) of cement and a density of 1,300 kg/m³. The polystyrene disposable dishes were ground into beads of 0–3 millimeters (mm) and 3–6 mm in size. First, the characteristics of Type II Portland cement, polystyrene, and aggregates were examined. The following characteristics of concrete using ASTM International and British Standards Institution standards were tested: slump, compressive strength, ability to resist chloride ion penetration, and resistance of concrete to rapid freezing and thawing cycles. Scanning electron microscopy (SEM) and energy dispersive X‐ray spectroscopy analytical techniques were also used. The slump of samples varied between 40 and 70 mm and was not dependent on either the polystyrene percentage or the size of the polystyrene beads in the concrete samples (p‐value > .05). The compressive strength of the concrete samples after 90 days of curing, and using different percentages of polystyrene, varied between 96 and 113 kilograms per square centimeter (kg/cm²). The resistance of the samples to the freezing and thawing cycle and chloride ion penetration were affected unfavorably by the presence of the polystyrene. The SEM technique indicated that concrete samples containing 15% and 25% polystyrene had denser crystals and less void than concrete samples with 40% and 55% polystyrene.