Optimization of the O3/H2O2 process with response surface methodology for pretreatment of mother liquor of gas field wastewater

• Real ML-GFW with high salinity and high organics was degraded by O₃/H₂O₂ process. • Successful optimization of operation conditions was attained using RSM based on CCD. • Single-factor experiments in advance ensured optimal experimental conditions. • The satisfactory removal efficiency of TOC was achieved in spite of high salinity. • The initial pH plays the most significant role in the degradation of ML-GFW. The present study reports the use of the O₃/H₂O₂ process in the pretreatment of the mother liquor of gas field wastewater (ML-GFW), obtained from the multi-effect distillation treatment of the gas field wastewater. The range of optimal operation conditions was obtained by single-factor experiments. Response surface methodology (RSM) based on the central composite design (CCD) was used for the optimization procedure. A regression model with Total organic carbon (TOC) removal efficiency as the response value was established (R² = 0.9865). The three key factors were arranged according to their significance as: pH>H₂O₂ dosage>ozone flow rate. The model predicted that the best operation conditions could be obtained at a pH of 10.9, an ozone flow rate of 0.8 L/min, and H₂O₂ dosage of 6.2 mL. The dosing ratio of ozone was calculated to be 9.84 mg O₃/mg TOC. The maximum removal efficiency predicted was 75.9%, while the measured value was 72.3%. The relative deviation was found to be in an acceptable range. The ozone utilization and free radical quenching experiments showed that the addition of H₂O₂ promoted the decomposition of ozone to produce hydroxyl radicals (·OH). This also improved the ozone utilization efficiency. Gas chromatography-mass spectrometry (GC-MS) analysis showed that most of the organic matters in ML-GFW were degraded, while some residuals needed further treatment. This study provided the data and the necessary technical supports for further research on the treatment of ML-GFW.     

高氯酸铁可见分光光度法测定水中叠氮化物研究

基于Fe~(3+)显色技术,建立了测定地表水、地下水、生活污水和工业废水中叠氮化物的高氯酸铁分光光度法。研究结果表明:N_3~-与Fe~(3+)反应生成的棕红色络合物的特征吸收峰为454 nm;氨基磺酸铵可有效掩蔽NO_2~-的干扰,蒸馏能消除色度、CN~-、SCN~-硫化物等对测定的影响;当取样体积为150 mL、蒸馏定容体积为100 mL、使用10 mm比色皿时,方法检出限为0.08 mg/L(以N_3~-计),测定下限为0.32 mg/L;平均回收率为88.0%~104%,相对标准偏差(n=6)为0.3%～5.6%。对实际工业废水样品进行了测定,结果为1.37 mg/L。该方法准确度高、精密度好、操作简单,能够满足水污染物排放标准中叠氮化物的测定要求。     

两性磁化炭添加比例对河流沿岸土吸附Cu2+的影响

将两性(十二烷基二甲基甜菜碱)修饰磁化炭分别以质量分数0、1%和2%加入嘉陵江流域(川渝段)内苍溪(CX)、南部(NB)、嘉陵(JL)和合川(HC)沿岸土中,考察各混合土样对Cu^2+的等温吸附和热力学特征。结果表明:混合土样对Cu^2+的最大吸附量为58.36 mmol/kg~366.85 mmol/kg,添加等量两性磁化炭时各混合土样对Cu^2+吸附量表现为JL>NB>CX>HC的趋势,且添加比越高吸附能力越强。各混合土样对Cu^2+的吸附为自发、吸热和熵增的反应过程,对Cu^2+的吸附量与温度和pH值均呈正相关关系。当离子强度为0.1 mol/L时,各混合土样(除HC外)对Cu^2+的吸附量最大。     

Potential energy production from organic waste and its environmental and economic impacts at a tertiary institution in Palestine

Municipal solid waste (MSW) is one of the most well-known biomass resources that can be utilized to produce renewable energy. Numerous countries are plagued by the proliferation of waste, particularly organic waste that can be utilized for energy recovery. Palestine suffers from inefficient solid waste management, and only recently have a few projects focused on bioenergy production been implemented. Throughout the years, the city of Tulkarm experiences power outages which cause a challenge to the Palestine Technical University-Kadoorie campus in Tulkarm. Thus, the possibility of energy recovery from the organic portion in Palestine Technical University-Kadoorie was evaluated. The analysis of an economic impact included discussions of a number of economic aspects, including Levelized cost of energy, internal rate of return, present worth, annual worth, and payback period. On the other hand, a carbon dioxide savings analysis and gas emission were evaluated. The outcomes of the energy optimization demonstrated that the suggested system could supply the institution with an average of roughly 7 MWh of electrical energy. According to the economic study, this project offers 0.25 million dollars in present value, 0.144 million dollars in annual value, a 13 percent internal rate of return, a payback period of 6 years, and a levelized cost of energy of 0.11 dollars for each kWh generated. Additionally, the environmental assessment revealed that this system might reduce CO₂ emissions by around 8,343,778 tons. For effective waste management, energy recovery, and emission reduction, it is advised to implement anaerobic digestion technology.     

Toward sustainable use of natural resources: Nexus between resource rents,affluence, energy intensity and carbon emissions in developing and transition economies

Sustainable use of natural resources would entail ensuring that derived economic benefits today do not undermine the welfare of generations to come. On this basis, this study examines the nexus between natural resource rents and carbon dioxide (CO₂) emissions disaggregated into production and consumption-based (i.e., trade-adjusted) CO₂ emissions for a selected panel of 45 developing and transition economies over the period 1995–2017. The empirical model also incorporates the impacts of population, affluence, and energy intensity. The results show that affluence increases production-based CO₂ emissions by 1.407%, with the EKC's predicted inverted U-shaped curve only explaining consumption-based CO₂ emissions. Economic reliance on natural resource rents and energy intensification contribute 0.022% and 0.766%, respectively, to CO₂ emissions embedded in territorial production inventories and 0.035% and 0.583%, respectively, to CO₂ emissions embedded in consumption inventories. The bootstrap non-causality test shows that historical data on each variable has significant predictive power for future CO₂ emissions from both sources. The historical information about natural resource rents has significant predictive power over the future levels of affluence and energy intensity. Clearly, the results show that the environmental impact of natural resource rents is stronger when CO₂ emissions are adjusted for trade and varies among the countries, with Bangladesh, Guinea, India, Malaysia, Mexico, Nigeria, Pakistan, Saudi Arabia, Vietnam, and Zimbabwe among the most affected countries. Overall, this study provides motivation for policies to keep the use of natural resources within sustainable limits.     

How does eliminating mercury from artisanal and small-scale gold mining lead to achieving sustainable development goals?

Artisanal and small-scale gold mining (ASGM) is the principal anthropogenic activity that globally contributes to overloading our environment with mercury. Although the Minamata Convention, led by the United Nations, is a crucial instrument to eliminate its use progressively, novel approaches to accelerate this difficult transition are welcome. This article proposes a framework for policy-making or improvement, fostering the enforcement of mercury elimination through the lens of the 17 Sustainable Development Goals (SDGs), focusing on the excluded artisanal and small-scale gold miners and their dependents. We move forward with a literature review of the Artisanal and Small Mining topic, taking each SDG as a unit of analysis. Understanding the problem as a puzzle of four sets of pieces, namely: (1) social, (2) environmental, (3) economic, and (4) institutional, the paper offers potential opportunities for the decision-makers and practitioners to accelerate the substitution of this heavy metal and develop sustainable futures for the ASGM communities. We conclude by proposing a pragmatic framework that synthesizes the means, actions, and ends to accelerate a sustainable transition.     

Identification and characterization of extracted microplastics from agricultural soil near industrial area: FTIR and X-ray diffraction method

Microplastics have been found in large quantities in agricultural soil and now become a major global issue. Different types of microplastic have adverse effects on agricultural soil. The most widely used method for the extraction of microplastics in agricultural soil is the density floatation method by using saturated NaCl solution. This method includes the pre-digestion of soil samples with H₂O₂ to remove all the organic matter present in the soil. Different types of microplastic particles were extracted and identified by using ATR-FTIR viz polypropylene, polybutylene tetrapthalate, polyethylene, polystyrene, and polyethylene tetrapthalate. The crystalline nature of extracted microplastic was checked by employing XRD analytical technique. Floatation with higher density saturated sodium chloride (NaCl) solution recovered approximately 80% MPs from soil. Floatation methods were found to be effective for extracting microplastics from soils.     

Spatial analysis of resources and environmental carrying capacity in Iran

Urbanization and mass movement of the population from rural areas and small cities to megacities have led to environmental, economic, and social problems in Iran. In dealing with these challenges, assessing resource and environmental carrying capacity (RECC) is considered an effective method to leverage space and capital to achieve sustainable development. This study aimed to rank the provincial RECC in Iran. Toward this purpose, environmental indices were generated from remotely sensed and statistical census data. Then, the provinces were scored in terms of environmental, economic, and infrastructural carrying capacities, and RECC using the mean variance analysis method. Results demonstrated that in most areas, there is no relationship between economic and infrastructural capacities and development. Statistically, a correlation coefficient of −0.53 between economic and environmental carrying capacities indicated excessive use of environmental capacities. Moreover, the spatial distribution pattern of environmental, economic, and infrastructural carrying capacity was entirely heterogeneous between the provinces; there was a northeast–southwest pattern in terms of infrastructural capacity and an economic pattern from north to south. The distribution pattern of RECC is most consistent with the environmental capacity, pointing at the high weight of the indicators of the RECC model. In conclusion, this research offers a new vision for policymakers and provides a theoretical and applicable framework for implementing sustainable strategies in land-use planning. It is recommended that the RECC concept and tools can be used not only for planning but also for measuring the efficiency of spatial development programs and establishing land balances in the region.     

Influence of pore structure on biologically activated carbon performance and biofilm microbial characteristics

• Pore structure affects biologically activated carbon performance. • Pore structure determines organic matter (OM) removal mechanism. • Microbial community structure is related to pore structure and OM removal. Optimizing the characteristics of granular activated carbon (GAC) can improve the performance of biologically activated carbon (BAC) filters, and iodine value has always been the principal index for GAC selection. However, in this study, among three types of GAC treating the same humic acid-contaminated water, one had an iodine value 35% lower than the other two, but the dissolved organic carbon removal efficiency of its BAC was less than 5% away from the others. Iodine value was found to influence the removal of different organic fractions instead of the total removal efficiency. Based on the removal and biological characteristics, two possible mechanisms of organic matter removal during steady-state were suggested. For GAC with poor micropore volume and iodine value, high molecular weight substances (3500–9000 Da) were removed mainly through degradation by microorganisms, and the biodegraded organics (soluble microbial by-products,<3500 Da) were released because of the low adsorption capacity of activated carbon. For GAC with higher micropore volume and iodine value, organics with low molecular weight (<3500 Da) were more easily removed, first being adsorbed by micropores and then biodegraded by the biofilm. The biomass was determined by the pore volume with pore diameters greater than 100 μm, but did not correspond to the removal efficiency. Nevertheless, the microbial community structure was coordinate with both the pore structure and the organic removal characteristics. The findings provide a theoretical basis for selecting GAC for the BAC process based on its pore structure.     

液液萃取-气相色谱/串联质谱法测定水中五氯酚及其钠盐

采用液液萃取处理水样,用气相色谱-串联质谱法测定样品中五氯酚及其钠盐,通过优化测定条件,使方法在1.00μg/L~500μg/L范围内线性良好。检出限和定量限分别为1.00μg/L和5.00μg/L,空白水样五氯酚钠3个质量浓度水平的加标回收率为89.8%~98.4%,5次平行试验测定结果的RSD为5.5%~10.7%。