Animal agency in wildlife conservation and management

Wildlife conservation and management (WCM) practices have been historically drawn from a wide variety of academic fields, yet practitioners have been slow to engage with emerging conversations about animals as complex beings, whose individuality and sociality influence their relationships with humans. We propose an explicit acknowledgement of wild, nonhuman animals as active participants in WCM. We examined 190 studies of WCM interventions and outcomes to highlight 3 common assumptions that underpin many present approaches to WCM: animal behaviors are rigid and homogeneous; wildlife exhibit idealized wild behavior and prefer pristine habitats; and human–wildlife relationships are of marginal or secondary importance relative to nonhuman interactions. We found that these management interventions insufficiently considered animal learning, decision-making, individuality, sociality, and relationships with humans and led to unanticipated detrimental outcomes. To address these shortcomings, we synthesized theoretical advances in animal behavioral sciences, animal geographies, and animal legal theory that may help conservation professionals reconceptualize animals and their relationships with humans. Based on advances in these fields, we constructed the concept of animal agency, which we define as the ability of animals to actively influence conservation and management outcomes through their adaptive, context-specific, and complex behaviors that are predicated on their sentience, individuality, lived experiences, cognition, sociality, and cultures in ways that shape and reshape shared human–wildlife cultures, spaces, and histories. Conservation practices, such as compassionate conservation, convivial conservation, and ecological justice, incorporate facets of animal agency. Animal agency can be incorporated in conservation problem-solving by assessing the ways in which agency contributes to species’ survival and by encouraging more adaptive and collaborative decision-making among human and nonhuman stakeholders.     

A new approach to spatial source apportionment of haze pollution in large scale and its application in China

Long-lasting expansion of haze pollution in China has already presented a stern challenge to regional joint prevention and control. There is an urgent need to enlarge and reconstruct the coverage of joint prevention and control of air pollution in key area. Air quality models can identify and quantify the regional contribution of haze pollution and its key components with the help of numerical simulation, but it is difficult to be applied to larger spatial scale due to the complexity of model parameters. The time series analysis can recognize the existence of spatial interaction of haze pollution between cities, but it has not yet been used to further identify the spatial sources of haze pollution in large scale. Using econometric framework of time series analysis, this paper developed a new approach to perform spatial source apportionment. We applied this approach to calculate the contribution from spatial sources of haze pollution in China, using the monitoring data of particulate matter (PM_2.5) across 161 Chinese cities. This approach overcame the limitation of numerical simulation that the model complexity increases at excess with the expansion of sample range, and could effectively deal with severe large-scale haze episodes.     

微塑料与污染物相互作用的研究进展

微塑料广泛存在于环境中,其比表面积大、吸附性强,可吸附环境中的重金属、有机物、微生物等污染物,并改变它们在环境中的归趋;同时,这些污染物也会影响微塑料的性质及其在环境中的吸附、迁移、降解等行为,进而对生态环境产生潜在风险.开展微塑料与污染物的相互作用研究是进行微塑料环境风险评价的基础.当前相关研究多集中于微塑料的分布及其对不同污染物的吸附作用等方面,而污染物对微塑料性质的影响研究及吸附后它们性质变化的研究相对较少.据此本文总结了微塑料在环境中的分布情况;以吸附为例,梳理了相互作用过程的影响因素和机理;综述了微塑料与污染物相互作用的研究现状;最后基于此展望日后的研究方向,以期对未来微塑料的相关研究提供参考和帮助.     

萃取法分离回收不锈钢酸洗污泥硫酸浸出液中的重金属

采用非皂化P204和皂化P204萃取剂对不锈钢酸洗污泥的硫酸浸出液进行萃取。在浸出液pH为0.80、非皂化P204体积分数为25%、萃取剂与浸出液体积比为1∶2、萃取时间为5 min的条件下,Fe~(3+)萃取率达99.64%,Cr~(3+)和Ni~(2+)萃取率为3.98%和6.99%,一次萃余液pH为0.64。采用皂化P204对除Fe~(3+)后的一次萃余液进行萃取,在P204体积分数为25%、萃取剂与浸出液体积比为1∶2、萃取剂皂化率为60%、一次萃余液pH为1.50、萃取时间为5 min的条件下,Ni~(2+)萃取率为93.12%,Cr~(3+)萃取率为20.69%,二次萃余液pH为2.63。     

Catalytic oxidation of CO over Pt/Fe3O4 catalysts: Tuning O2 activation and CO adsorption

• Strong metal-support interaction exists on Pt/Fe₃O₄ catalysts. • Pt metal particles facilitate the formation of oxygen vacancies on Fe₃O₄. • Fe₃O₄ supports enhance the strength of CO adsorption on Pt metal particles. The self-inhibition behavior due to CO poisoning on Pt metal particles strongly impairs the performance of CO oxidation. It is an effective method to use reducible metal oxides for supporting Pt metal particles to avoid self-inhibition and to improve catalytic performance. In this work, we used in situ reductions of chloroplatinic acid on commercial Fe₃O₄ powder to prepare heterogeneous-structured Pt/Fe₃O₄ catalysts in the solution of ethylene glycol. The heterogeneous Pt/Fe₃O₄ catalysts achieved a better catalytic performance of CO oxidation compared with the Fe₃O₄ powder. The temperatures of 50% and 90% CO conversion were achieved above 260°C and 290°C at Pt/Fe₃O₄, respectively. However, they are accomplished on Fe₃O₄ at temperatures higher than 310°C. XRD, XPS, and H₂-TPR results confirmed that the metallic Pt atoms have a strong synergistic interaction with the Fe₃O₄ supports. TGA results and transient DRIFTS results proved that the Pt metal particles facilitate the release of lattice oxygen and the formation of oxygen vacancies on Fe₃O₄. The combined results of O₂-TPD and DRIFTS indicated that the activation step of oxygen molecules at surface oxygen vacancies could potentially be the rate-determining step of the catalytic CO oxidation at Pt/Fe₃O₄ catalysts. The reaction pathway involves a Pt-assisted Mars-van Krevelen (MvK) mechanism.     

基于吸附质-分子探针的新型交联壳聚糖的吸附特性

研究了CCTS对低浓度游离酸的吸附特性,基于吸附质-分子探针电位法,考察了吸附剂活性中心数目、游离酸种类和温度对吸附行为的影响。结果表明,在30℃时,CCTS吸附游离酸的过程,遵循单分子层机理进行吸附。吸附剂―吸附质相互作用能U制约表观吸附速率常数K,K、U大小分别为2.519×10-2,4.084×10-2,9.398×10-2L/min和7.264,7.420,7.926 kJ/mol,两者存在线性相关性,呈逐渐增大趋势。K、U大小随着活性中心数目G的增加而增大。CCTS吸附游离酸为吸热过程,吸附表观活化能Ea为33.98 kJ/mol。3种类型游离酸K、U的大小顺序为:HClO4>HNO3>H2SO4,吸附分维数Dw分别为1.384、1.567、1.911,Dw值越大,导致表观吸附速率常数降低。     

Risk and characteristics analysis of the flow-induced vibration of the dip tube in opposed multi-burner gasifier

The vibration of dip tube in multi-burner gasifier changes the stress at the connection, causing flange seal failures and high temperature gas erosions with heavy economic losses and industrial accidents. This work aims to reveal the dip tube vibration mechanism, with special focus on obtaining the effect of operational parameters on the fatigue damage and long-term stable operation of gasifiers. A three-dimensional numerical simulation of the water-scrubbing cooling chamber was conducted to obtain the excitation source in the flow field. Then a FSI (fluid-structure interaction) transient dynamics simulation was carried out to investigate the vibration characteristics. Two major flow forms were found: a vertical annular flow near the dip tube outlet in the water-scrubbing cooling chamber; and a gas-liquid coupled flow caused by the syngas entrained the liquid. These two unstable multiphase flow forms exerted an energy excitation on the dip tube, resulting in a self-excited flutter. The dip tube vibration was similar to the first mode of a cantilever beam. The peak frequency was less affected by the initial liquid level and the syngas stream inlet velocity, which was close to its own first natural frequency. Note that, the alternating load generated by vibration may cause fatigue damage, which needs to be specifically considered in the design and manufacturing process of opposed multi-burner gasifier.     

Selective sorption of perfluorooctane sulfonate on molecularly imprinted polymer adsorbents

Perfluorooctane sulfonate (PFOS), as a potential persistent organic pollutant, has been widely detected in water environments, and has become a great concern in recent years. PFOS is very stable and difficult to decompose using conventional techniques. Sorption may be an attractive method to remove it from water. In this study, the molecularly imprinted polymer (MIP) adsorbents were prepared through the polymerization of 4-vinylpyridine under different preparation conditions in order to remove perfluorooctane sulfonate (PFOS) from water. The MIP adsorbents using perfluorooctanoic acid (PFOA) as the template had good imprinting effects and could selectively remove PFOS from aqueous solution. The sorption behaviors including sorption kinetics, isotherms, and effect of pH, salt, and competitive anions were investigated. Experimental results showed that the sorption of PFOS on the MIP adsorbents was very fast, pH-dependent, and highly selective. The achieved fast sorption equilibrium within 1 h was attributed to the surface sorption on the fine adsorbents. The sorption isotherms showed that the sorption selectivity of PFOS on the MIP adsorbents decreased at high PFOS concentrations, which may be due to the double-layer sorption and the formation of PFOS micelles on the sorbent surface. The sorption of PFOS on the MIP adsorbents was mainly dominated by the electrostatic interaction between the protonated vinylpyridine on the adsorbent surface and the anionic PFOS. The prepared MIP adsorbents can potentially be applied in water and wastewater treatment for selective removal of PFOS.     

新型氨化菌丝体吸附剂的制备及吸附典型内分泌干扰物的研究

以产黄青霉(Penicillium chrysogenum)菌丝体为原料,通过2步化学反应将含有大量氨基的聚乙烯亚胺(PEI)嫁接到菌丝体表面,优化反应条件,得到最佳的氨化菌丝体吸附剂.该氨化吸附剂的等电点为pH 10.2,是一种表面带正电荷的菌丝体吸附剂,能有效吸附水中的阴离子内分泌干扰物五氯酚钠(PCP)、2,4二氯苯氧乙酸(2,4-D)和全氟辛烷磺酸钾(PFOS).3种污染物的吸附等温线符合Langmuir方程,15℃时最大吸附量分别为342.9、234.1、1725.6 mg/g.热力学计算表明,3种污染物的吸附均是自发发生的,2,4-D和PFOS的吸附是吸热反应,而PCP是放热反应.     

氧活性粒子氧化NO生成HNO_3

采用强电离介质阻挡放电方法制取高浓度氧活性粒子(O+2、O3)并注入气体外排烟道中,实现O+2、O3氧化NO转化成资源酸(HNO3)的等离子化学反应。描述强电离放电的氧活性粒子产生器,讨论烟道中O+2、O3氧化NO成HNO3等离子体反应机制,分析回收酸液的NO-2、NO-3离子种类及浓度。考察强电离放电等离子体源的输入功率、水体积百分比、气体温度、气体流速对NOx氧化率的影响。氧化率为97.2%的最佳实验条件是:O+2浓度为1.38×1010个/cm3,O3浓度为210 mg/L,烟气温度为65℃,H2O体积浓度为5.6%,停留时间为0.94 s。