Hydrochemistry of drinking water sources and water purifiers in relation to epidemiological study in Hisar,North-West India

The concern related to the drinking of reverse osmosis (RO) water containing low levels of minerals is growing day by day. This study involves the analysis of water samples from various drinking water sources in a rural site, Mirchpur village, an Indus Valley civilization site (grid location: 29° 18′ 42.3″ N, 76° 10′ 33.0″ E) of Hisar, India, along with the health survey of human subjects. The hydrochemistry of water collected from hand pumps, river canals, tube wells, submersibles, and the RO systems installed in various homes was explored for pH, EC, TH, TDS, turbidity, cations (Na⁺, Ca²⁺, Mg²⁺), anions (CO₃²⁻, HCO₃⁻, Cl⁻, SO₄²⁻, NO₃⁻, F⁻), and elements (Fe, Pb, Se) employing the ion chromatography, flame photometry, and ICP-AES techniques. Lead (Pb) and Selenium (Se) were detected in trace amounts (0.30–2.6 μg L⁻¹; 0.10–4.1 μg L⁻¹, respectively) in all the samples, including the samples collected from RO purifiers, but Iron (Fe) was not detected in RO samples even in trace amounts. The F-levels in hand pump water (HPW) and submersible water (SW) (1.9  and 1.7 mg L⁻¹, respectively) and TDS levels in SW (3048 mg L⁻¹) were found to be above WHO and BIS safe limits. TDS levels in the river canal (900 mg L⁻¹), tube well (1104 mg L⁻¹), hand pump (1170 mg L⁻¹), and submersible samples (3048 mg L⁻¹) were found significantly higher as compared to the RO personal water (ROPW; 216 mg L⁻¹) and RO supply water (ROSW; 90 mg L⁻¹). The collected epidemiological data reveals that 21%, 19%, 13%, and 12% of natives reported skin, kidney, hair fall, liver, and stomach issues, respectively, suspecting the crucial role of high TDS and fluoride levels in the area. This study also provides a comparison between the quality of RO and the direct supply water, along with correlation matrices for different parameters, which gives a rationale for the limitations of drinking direct supply water without any purification and RO water containing low mineral content.     

水中总氮测定方法存在问题的研究及改进

碱性过硫酸钾消解紫外分光光度法测定水中总氮采用的消解器皿是玻璃比色管,易造成空白偏高、结果偏低等问题。采用双圆柱状的消解杯对水样进行消解。结果表明,消解杯消解水中总氮,线性相关系数均大于0.999,检出限为0.05 mg/L,相对标准偏差小于5%,相对误差为0.88%~1.00%;改进后的消解器皿具有较好的精密度和准确度,能够更加准确测定水中总氮的含量。     

淮河支流污染物综合降解系数动态测算

确定河流污染物综合降解系数动态变化规律对提高水环境容量测算精度和水环境管理具有重要意义。通过现场模拟法,采用一维稳态模型测算了淮河支流洪河五沟营-塔桥乡河段COD、氨氮和总磷在枯水期、平水期和丰水期的综合降解系数,COD、氨氮和总磷降解系数在各水期的关系为枯水期平水期丰水期,提出了建议值并利用实测浓度对计算结果进行了检验,结果表明,不同水期综合降解系数吻合情况较好。     

基于3S技术对太湖底质及水质总磷的研究

应用3S技术研究了太湖底质与水质总磷(TP)的分布情况,并结合水华频次分析了其相关性。结果表明:2016—2018年,太湖底质TP年均值在433~537 mg/kg波动,水质TP年均值从0.064 mg/L上升至0.087 mg/L。从空间分布来看,底质TP、水质TP和水华频次均呈现“西高东低”的规律,太湖西部区尤其是竺山湖区是需要开展治理的重点区域。3年间,太湖西部区水质TP上升,而底质TP与入湖河流TP下降,说明内源磷污染是太湖西部区水质TP升高的主要原因,须加强科学清淤。     

都匀毛尖茶土壤中总磷含量的调查研究

目的:调查都匀毛尖茶土壤中总磷的含量;方法:以贵州省都匀市毛尖茶产地--螺丝壳山的土壤为研究对象,采用酸法消解,用钼酸铵分光光度法于700 nm波长处测定土壤中总磷含量;结果:都匀螺丝壳山中土壤中总磷含量在177.58 mg·kg-1~353.92 mg·kg-1之间;结论:都匀毛尖茶土壤中的总磷含量在全国基本水平范围以内,总磷含量与土壤的类型、土壤所处海拔高度无明显关系。     

塑料管材输配水过程中有机物释放规律研究

研究了目前给水管网中常用的3种塑料管材,未增塑聚氯乙烯(uPVC),聚乙烯(PE)和无规共聚聚丙烯(PPR)管在输配水过程中有机物的释放规律.通过静态管段实验模拟给水管网中不同输配水状态,选取总有机碳(TOC)为综合评价指标,考察了不同塑料管材中有机物随时间的迁移释放特性,并分析了管材有机物释放对管网水中余氯消耗的影响.随着管材输配水次数的增加,uPVC管释放至水中的TOC浓度和TOC释放速率分别在0.03mg/L和0.04μg/(d?cm2)以下,而PE管和PPR管在输配水过程中TOC的释放浓度和释放速率在初期最大[PE: 0.19mg/L,0.25μg/(d?cm2);PPR:0.07mg/L,0.09μg/(d?cm2)],且后期递减并趋于平稳[PE:0.03~0.08mg/L,0.05~0.10μg/(d?cm2);PPR:0.01~0.03mg/L, 0.01~0.04μg/(d?cm2)].随着水力停留时间的增加,不同管材释放的有机物浓度持续升高.不同管材有机物的释放能力排序为:PE>PPR>uPVC.各管材的有机物释放特性直接影响管网水的余氯消耗特性,且管材的有机物释放量越多,管网水的余氯消耗越快.PE管的使用易引起水体有机污染问题.本研究明确了3种常用塑料管材的有机物释放规律,将进一步为与塑料管材安全性能评价相关的国家标准的修订提供理论依据.     

Evaluation of accuracy of linear regression models in predicting urban stormwater discharge characteristics

Stormwater runoff has been identified as a source of pollution for the environment, especially for receiving waters. In order to quantify and manage the impacts of stormwater runoff on the environment, predictive models and mathematical models have been developed. Predictive tools such as regression models have been widely used to predict stormwater discharge characteristics. Storm event characteristics, such as antecedent dry days （ADD）, have been related to response variables, such as pollutant loads and concentrations. However it has been a controversial issue among many studies to consider ADD as an important variable in predicting stormwater discharge characteristics. In this study, we examined the accuracy of general linear regression models in predicting discharge characteristics of roadway runoff. A total of 17 storm events were monitored in two highway segments, located in Gwangju, Korea. Data from the monitoring were used to calibrate United States Environmental Protection Agency＇s Storm Water Management Model （SWMM）. The calibrated SWMM was simulated for 55 storm events, and the results of total suspended solid （TSS） discharge loads and event mean concentrations （EMC） were extracted. From these data, linear regression models were developed. R2 and p-values of the regression of ADD for both TSS loads and EMCs were investigated. Results showed that pollutant loads were better predicted than pollutant EMC in the multiple regression models. Regression may not provide the true effect of site-specific characteristics, due to uncertainty in the data.     

中国污染物总量减排数据核算体系研究

"十一五"期间,中国对COD和SO2两种污染物开展总量减排工作,预期指标超额完成。"十一五"期间构建起来的总量减排数据核算体系为中央政府提供了相对准确的减排数据,是减排取得成功的基础。本文通过研究减排数据核算体系来对总量减排的成功进行制度性解释。本文采用文本分析和实地调研的方法,描述了中国减排数据核算体系的组织机构及其基本职责,整理出了自下而上的数据生成、流动机制和自上而下的数据核查、反馈机制,归纳出总量减排数据核算体系相较于传统环境统计的基本特征:一是设立了区域督查中心和各级总量控制部门等专门的组织机构;二是数据的双向流动机制,中央拥有对减排数据的审核权和最终确定权,并且会将正式确定后的数据逐级反馈给地方政府并应用于上级政府对下级政府的行政考核当中去;三是在数据核算中采用环境监测数据,并因此进行了全国范围的环境监测能力建设;四是减排工作全过程数据核算。这些新特征使得中国减排数据核算体系得以提升减排数据质量,对地方政府可能的违规行为进行约束;将减排绩效与地方政府考核相结合,通过政治激励促进地方政府开展减排工作;加强地方政府环境监管能力,保障减排工作的开展和完成。但现有数据核算体系仍然存在监测数据利用不到位而导致行政成本较高、减排量核算细则"一刀切"导致政策公平性缺失等亟需改进完善的问题。     

需求视角的中国能源消费氮氧化物排放研究

基于经济投入产出生命周期评价(EIO-LCA)模型构建了中国1990—2010年能源消费氮氧化物完全排放矩阵,从需求的角度分析了氮氧化物排放在部门和不同需求间的分布结构,并通过情景模拟深入探讨了最终需求结构变化对氮氧化物排放的综合影响和拉动效应,以期探索中国氮氧化物减排的多元化途径.研究结果显示,1990—2010年中国氮氧化物排放总量从878万t上升到2398万t,历年来由工业部门拉动产生的氮氧化物占总量的比重高达70%左右;由最终消费拉动的氮氧化物排放比重逐年下降,资本形成和出口拉动的氮氧化物排放比重逐年上升.氮氧化物排放强度则从47.0 kg·万元-1降至6.0 kg·万元-1,其中,能源和交通部门的排放强度最高.通过情景模拟可以看出,提高最终消费比重,扩大内需有利于氮氧化物总量减排,尤其是对工业部门的减排效果显著.实现氮氧化物总量减排目标,要求在技术进步之外,积极寻求多元减排措施,以强化减排效果,突出能源和交通等重点部门的氮氧化物防治体系建设,并通过扩大内需优化最终需求结构以促进工业部门氮氧化物减排.     

周期换向电絮凝法用于处理含铬废水研究

以铁作为极板,采用周期换向电絮凝法处理含铬废水,考察了初始pH值,电流密度,处理时间,初始质量浓度及周期换向时间等因素的影响.结果表明,在初始pH值为8.0~9.0,电流密度为16.37A/m2,处理时间为3.0min,初始浓度为40mg/l时,总铬和六价铬的去除效果理想,去除率均在99.5%以上;10~15min的换向周期在一定程度上解决了极板钝化问题,可降低10%~20%的能耗.实验结果表明周期换向电絮凝法处理含铬废水效果好,且可降低能耗.