河北省不同盐渍化土壤类型的微生物多样性与种群结构

为了探索盐渍化土壤中微生物多样性及群落构成，有效筛选盐渍土壤中耐盐微生物菌群.采用高通量测序技术对采集的河北省滨海盐渍土（原生盐渍化）、设施盐渍土（次生盐渍化）和高产粮田（健康土壤）3个生境的耕层土壤样本细菌和真菌多样性、群落结构、网络关系及其影响因子进行测定.结果表明，与大田土壤相比，设施土壤中OM、AP、AK、TS和EC显著升高，滨海盐渍土壤的TS和EC显著升高，其他养分指标则显著降低.细菌α多样性依次为：设施盐渍土>高产粮田>滨海盐渍土，真菌α多样性则为高产粮田显著高于设施盐渍土和滨海盐渍土.在门和属水平上分析盐渍化土壤的菌群结构，细菌群落中绿弯菌门（Chloroflexi）及其菌属和真菌群落中子囊菌门（Ascomycota）及其中有益菌Trichocladium和病原菌Fusarium为盐渍化土壤中的优势微生物类群.土壤EC和TS两个盐分因子是对细菌和真菌菌群分布贡献最大的因子，与绿弯菌门中unclassified_A4b和unclassified_Chloroflexi以及变形菌门中unclassified_α-Proteobacteria等细菌菌属和子囊菌门中Trichocladium、unclassified_Chaetomiaceae、Crassicarpon、Cephaliophora和Sodiomyces等真菌菌属呈显著正相关.研究结果为盐渍化土壤修复所需的微生物资源筛选提供了理论依据.     

建筑安全风险因素分级排序的风险矩阵法

为减少风险分级排序时产生的风险结,在引入施工安全事故频率的基础上,采用单元格细化和Borda序值法改进原有的风险矩阵法。改进后的方法使得风险等级数量增加,风险结数量减少。将该方法应用于脚手架工程的风险因素的分级与排序,风险等级分为6级,且实现了12个因素的明确排序。     

Fatal pedestrian crashes on interstates and other freeways in the United States

Introduction: More than 800 pedestrians die annually in crashes on interstates and other freeways in the United States, but few studies have examined their characteristics. Method: Data from the Fatality Analysis Reporting System on pedestrians fatally injured during 2015–2017 were analyzed. Chi-square tests compared characteristics of pedestrians killed on interstates and other freeways with those that died on other roads, and across crash types among freeway deaths. Land use characteristics of locations where pedestrians were killed while crossing freeways in a large state (California) were identified using Google Earth. Results: A larger proportion of pedestrians killed on freeways died on dark and unlit roads (48% vs. 32%), were male (78% vs. 68%), or were ages 20–44 (55% vs. 32%) compared with pedestrians killed on other roads. Crossing (42%) was the most common crash type among pedestrian deaths on freeways, followed by disabled-vehicle-related crashes (18%). Pedestrians who died while crossing more often had blood alcohol concentrations ≥ 0.08 g/dL (40%) than those in disabled-vehicle-related (22%) or other crashes (34%). Deaths in crossing crashes were more likely than other freeway deaths to occur on urban roads (81%), at speed limits ≤50 mph (13%), or between 18:00 and 23:59 (49%), and 58% of crossing crashes analyzed for land use were located between residential and other (e.g., commercial, recreational) uses. Over a third (37%) of deaths in disabled-vehicle-related crashes occurred at speed limits ≥70 mph. Conclusions: A surprising proportion of pedestrian deaths occur on controlled-access roads not designed for walking. Countermeasures for these crashes need to be implemented to see meaningful reductions in pedestrian fatalities overall. Practical applications: Improving roadway and vehicle lighting, requiring reflective warning devices for marking disabled vehicles, constructing pedestrian overpasses and underpasses in areas frequently crossed, and promoting alternative means of traveling between residential and commercial areas could help.     

燃煤电厂超低排放气态污染物监测技术综述

介绍了燃煤电厂超低排放气态污染物监测系统的采样系统和分析单元,分析了其各自的优缺点。对稀释抽取式、冷干抽取式和热湿抽取式3种采样方法,以及非分散红外吸收法(NDIR)、非分散紫外吸收法(NDUV)、紫外差分吸收法(DOAS)、紫外荧光法(UVF)和化学发光法(CL)5种分析方法进行对比。结果表明,冷干抽取式+紫外差分法以及稀释抽取式+紫外荧光法+化学发光法可以较好地符合燃煤电厂超低排放监测的要求。     

循环载荷下煤裂隙演化试验研究

为了研究循环载荷下的煤体裂隙演化特征，在不同应力水平和不同频率条件下分别进行煤样破坏力学及声发射试验。结果表明:应力-应变曲线呈疏-密-疏的变化特征，对应的振铃数柱状图呈U型；上限应力点的应变值、累积能量、撞击计数均随循环次数增加而上升，曲线呈倒S型；煤裂隙演化经历了原始裂隙闭合、新生裂隙稳定发育和裂纹贯穿破坏等3个不同阶段；循环载荷的应力水平和加载频率对煤体疲劳寿命的影响具有差异性，对煤体裂隙演化和破坏模式均有明显影响。     

南京地区污水厂、自来水厂及长江水域MCR-1和NDM-1携带菌耐药特征

为了研究以多粘菌素耐药基因(MCR-1)和新德里金属β-内酰胺酶-1基因(NDM-1)携带菌为代表的"超级细菌"在地表水中的环境行为,以长江南京段典型水域及邻近城市污水厂和自来水厂为研究对象,考察了MCR-1和NDM-1携带菌的耐药特性及其变化特征。结果发现,污水厂进水和生物处理单元2种细菌耐药能力均处于较高水平,随处理流程呈降低趋势,至消毒出水中不再被检出。长江中MCR-1携带菌耐粘菌素的半抑制浓度(EC50)较高,平均达37.89 mg·L-1,顺水流方向无显著降低。仅在下游朱家山河汇入口和长江大桥附近滨江公园检出较高耐药水平的NDM-1携带菌。2种细菌耐药水平受水体污染程度和人类活动影响较明显。自来水厂MCR-1携带菌数目较少,但其EC50平均可达32.75 mg·L~(-1),常规处理单元中未检出NDM-1携带菌。水处理工艺显著降低了细菌耐药水平,但排泥水中2种细菌均检出,且耐药水平相比进水显著提高。本研究可为评价水介质中超级抗性基因及其携带菌的环境风险提供参考。     

Factors contributing to US chemical plant process safety incidents from 2010 to 2020

Process safety incidents can result in injuries, fatalities, environmental impacts, facility damage, downtime & lost production, as well as impacts on a company's and industry's reputation. This study is focused on an analysis of the most commonly reported contributing factors to process safety incidents in the US chemical manufacturing industry. The database for the study contained 79 incidents from 2010 to 2019, partly investigated by the Chemical Safety Board (CSB). To be included in the study, the CSB archive of incident investigations were parsed to include only incidents which occurred at a company classified as 325 in the North American Industry Classification System (NAICS), assigned to businesses that participate in chemical manufacturing. For each incident, all of the identified contributing factors were catalogued in the database. From this list of identified contributing factors, it was possible to name the ‘top three’ contributing factors. The top three contributing factors cited for the chemical manufacturing industry were found to be: design; preventive maintenance; and safeguards, controls & layers of protection. The relationship between these top contributing factors and the most common OSHA citations was investigated as well. The investigation and citation history for NAICS 325 companies in the Occupational Safety & Health Administration (OSHA) citations database was then analysed to assess whether there was any overlap between the top reported contributing factors to process safety events and the top OSHA citations recorded for the industry. A database consisting of the inspection and citation history for the chemical manufacturing industry identified by NAICS code 325 was assembled for inspections occurring between 2010 and 2020 (August). The analysis of the citation history for the chemical manufacturing industry specifically, identified that the list of the top contributing factors to process safety incidents overlapped with the most common OSHA violations. This finding is relevant to industry stakeholders who are considering how to strategically invest resources for achieving maximum benefit – reducing process safety risk and simultaneously improving OSHA citation history.     

北京地区PM10与秸秆燃烧排放单颗粒对比分析

采用场发射带能谱扫描电镜(FESEM/EDS)法分析北京怀柔地区PM₁₀与秸秆燃烧排放颗粒的形貌特征和成分差异。结果显示:秸秆燃烧后排放颗粒物多为大粒径颗粒,成分上都含S、Cl和K元素。含有生物质燃烧标志元素K的PM₁₀颗粒物多为含Si、Al和Na元素的燃煤飞灰和矿物颗粒,与秸秆燃烧排放颗粒组成化学元素差异明显。据此推断,北京区域PM₁₀受秸秆燃烧排放影响相对较弱,化石燃料燃烧来源影响仍然显著。     

应对气候变化法的立法探究

为了实现碳排放达峰目标和碳中和愿景,明确应对气候变化的法律地位、工作目标和法律要求,规定部门职责及温室气体排放权的法律属性与交易机制,分解工作目标并开展评价考核,彰显国家应对气候的法治决心,亟须制定综合性基础法律——应对气候变化法。该法的制定已具备充足的研究起草基础和下位法支撑,建议尽快纳入全国人大常委会立法计划,并启动《环境保护法》等相关法律的修改。本文建议,将低碳发展和碳排放达峰、碳中和等纳入立法目的,设立总则、规划与标准、气候变化减缓、气候变化适应、管理和监督、国际合作、法律责任、附则八章,合理设立规范重点。健全统一监管与部门分工负责的体制和基金筹集、市场交易、社会共治等机制,全面构建国内应对气候变化管理制度体系,部署国际协商与合作措施,设置地方政府工作目标责任,对违法行为规定罚则。     

北京首都机场绿色滑行时间估算

采用北京首都机场2014年实际CDM地面放行数据确定航空器的污染物排放量与离场排队飞机数量和落地滑入飞机数量的强关联性,构建包含这两个解释变量为影响因素的多元线性回归模型,用以估算几种常见机型在首都机场地面运行时的最小污染物排放量和绿色滑行时间。对比实际污染物排放量与最小污染物排放量,得出首都机场离场地面污染物排放量远远超过最小污染物排放量。