南京市典型地区大气多环芳烃污染特征及健康风险评价

采用气相色谱-质谱法,于2016年9月和12月对南京市2个典型地区大气中16种多环芳烃(PAHs)的质量浓度进行分析,并开展了PAHs组成特征、来源解析及人体健康风险评价研究。结果表明,工业区(六合区)和生活区(江宁区)大气(气态和可吸入颗粒态)中16种PAHs的质量浓度分别为914.82和712.27 ng/m~3,苯并[a]芘毒性等效浓度分别为274.1和309.84 ng/m~3,且呈现冬季高、秋季低的特征。比值法源解析结果表明,燃煤污染是六合区PAHs污染主要来源,而江宁区主要表现为交通污染。人体健康风险评价结果表明,六合区和江宁区人群通过大气吸入PAHs的超额致癌风险分别为5.17×10~(-5)和5.85×10~(-5),均略高于可接受水平10~(-6)。     

海洋风电场水下噪声评估与管理研究

总结了海洋风电场建设中水下噪声的主要类型与声学特性,基于国内外水下噪声对海洋生物影响的最新研究成果,分析了海洋风电场噪声对生态环境的可能影响,尤其是近岸海域海洋风电施工期冲击式打桩噪声对海洋生物的影响。在此基础上,参考《海上风电工程环境影响评价技术规范》的相关内容,提出了海洋风电场水下噪声测量与评估方法,以及控制与降低噪声的措施建议。     

Environmental life cycle assessment of different types of the municipal wastewater pipeline network

With the onset of social life, humans have considered waste disposal as essential, and they have been able to repel it through brick and clay channels. Checking sewage pipes for energy consumption and a longer lifetime than other sewage system components is important. Climate change and exploitation of industrial resources have made environmental impacts, which are important factors in decision making. The purpose of this study was to introduce the most suitable type of sewage pipe considering environmental protection. Therefore, we applied the environmental life cycle assessment (LCA) method, using Sima Pro 8.2.3 software for the one-kilometer length of concrete pipes (300 mm in diameter), Polyvinyl chloride (PVC), and polyethylene (PE) (315 mm in diameter). Also, the BEES method and sensitivity analysis were used to validate the results. The comparison between three types of municipal wastewater pipes indicated that PE pipes are a more environmentally friendly option than PVC, and concrete pipes in pipe recycling, reducing extraction from untapped resources, and inefficient extraction of resources. Electricity, diesel fuel, and sulfate resistance cement consumption for concrete production are the most pollution elements in the LCA of concrete pipes. Usage of PVC granular, sanitary landfill of PVC pipes, and using hydraulic drill in LCA of PVC pipes are the most elements of generating pollution. The usage of PE granules, PE pipes landfilling, hydraulic excavator, and electricity consumption in the LCA of the PE pipes are the greatest polluting parameters.     

基于环境监测实验室的高校实验室安全准入制度信息系统功能优化研究

梳理了高校实验室环境-安全-健康准入制度包含的管理内容,从人员管理、设备管理、试剂管理、实验环境管理角度进行了分析。根据现有实验室安全信息化系统运行情况,探讨了将实验室安全信息化系统与实验室信息化系统、设备管理信息化系统进行数据融合和功能优化的要点,重点分析了设备采购及管理系统、实验室安全教育与考试系统、实验室安全检查系统、试剂管理平台、实验室门禁管理系统在功能上的内在关联,从而通过试剂管理平台、实验室门禁控制系统、设备采购系统实现实验室环境-安全-健康准入制度的强制执行。研究发现,高校与环境监测实验室、院系实验室安全管理部门联合促进实验室安全信息化系统、实验室信息化系统、设备管理信息化系统的数据共享与功能升级,可以丰富实验室安全准入制度的内涵和管理手段,加强实验室安全准入制度的强制执行力,提高实验室安全管理效率。     

面向管理的海洋修复工程生态绩效考核指标体系构建研究

目前国内关于海洋修复工程的考核研究多为修复工程的生态效果考核,极少包含成本效益考核,以致无法比较和分析不同类型、不同规模的海洋修复工程的生态绩效,不利于海洋修复工程的考核和验收管理。根据当前自然资源部实施“蓝色海湾”等整治修复工程的检查验收管理的新需求,本文构建了基于海洋生态系统健康恢复、生态系统服务价值增长和单位成本生态效益等理论的海洋修复工程生态绩效考核指标体系。此外,本文以温州海域2014—2016年海洋修复的生态绩效的考核为例,结合考核结果以及直接相关性、独立性、可测量性和业务化等指标选取原则,对指标体系进行了改进。结果表明本指标体系可以在海洋修复工程的检查验收中被用于生态绩效考核,管理部门可根据海洋修复工程的类型和管理需求,有选择性地采纳部分或全部指标进行考核。     

A proactive process risk assessment approach based on job hazard analysis and resilient engineering

Complex systems often experience a long period of incubation before accidents occur. Therefore, a proactive risk assessment is essential for process safety. The conventional job hazard analysis (JHA) method has been an effective tool to conduct a process risk assessment in the high-risk industrial field. However, the conventional JHA is inadequate for the proactive risk assessment since it is usually conducted during and before one specific operation process. Operations such as startup and maintenance are performed repeatedly on the lifecycle of a plant. Therefore, the risk reduction measures for the industrial process should include not only preventive actions obtained from the conventional JHA but also recovery ones. Resilience engineering (RE) has proven to be helpful for the recovery analysis of a complex system. The objective of this paper is to propose a proactive and comprehensive process risk assessment approach based on JHA and RE. The mechanism of applying RE to address operation process risk is illustrated. The integrated approach can provide guidelines to establish proactive risk reduction measures as well as maintain a low-risk level. Finally, a gas transmission startup process risk assessment case is presented to demonstrate its applicability.     

典型产业承接区土壤砷含量的空间分布特征及影响因素

本文以揭阳市为研究区域,采集了1330个表层土壤(0—20 cm)样品和331个深层土壤(150—200 cm)样品,利用富集因子法分析了表层土壤中As的污染状况,通过GIS空间分析技术以及单因素分析法探究了土壤As的空间分布特征以及影响因素.结果表明,研究区表层土壤As含量的均值为6.03 mg·kg^-1,低于该区土壤背景值(7.16 mg·kg^-1)及农用地土壤污染风险管控值(20 mg·kg^-1),大部分土壤为轻微污染和中度污染.揭阳市表层土壤As含量高值区分布于揭阳市东北部、中部和西南部地区,低值区分布于西北部和东南部地区.土壤类型、成土母质和土地利用类型是影响表层土壤As含量的重要因素,在不同土壤类型中,黄壤和赤红壤As含量相对较高;不同成土母质中,粉砂岩母质土壤As含量显著高于其他母质;在不同土地利用类型中,农用地土壤As含量最高.     

Toward harmonizing prospective effectiveness assessment for road safety: Comparing tools in standard test case simulations

Abstract

Objective: With the overall goal to harmonize prospective effectiveness assessment of active safety systems, the specific objective of this study is to identify and evaluate sources of variation in virtual precrash simulations and to suggest topics for harmonization resulting in increased comparability and thus trustworthiness of virtual simulation-based prospective effectiveness assessment.

Methods: A round-robin assessment of the effectiveness of advanced driver assistance systems was performed using an array of state-of-the-art virtual simulation tools on a set of standard test cases. The results were analyzed to examine reasons for deviations in order to identify and assess aspects that need to be harmonized and standardized. Deviations between results calculated by independent engineering teams using their own tools should be minimized if the research question is precisely formulated regarding input data, models, and postprocessing steps.

Results: Two groups of sources of variations were identified; one group (mostly related to the implementation of the system under test) can be eliminated by using a more accurately formulated research question, whereas the other group highlights further harmonization needs because it addresses specific differences in simulation tool setups. Time-to-collision calculations, vehicle dynamics, especially braking behavior, and hit-point position specification were found to be the main sources of variation.

Conclusions: The study identified variations that can arise from the use of different simulation setups in assessment of the effectiveness of active safety systems. The research presented is a first of its kind and provides significant input to the overall goal of harmonization by identifying specific items for standardization. Future activities aim at further specification of methods for prospective assessments of the effectiveness of active safety, which will enhance comparability and trustworthiness in this kind of studies and thus contribute to increased traffic safety.     

Hydrochemistry of drinking water sources and water purifiers in relation to epidemiological study in Hisar,North-West India

The concern related to the drinking of reverse osmosis (RO) water containing low levels of minerals is growing day by day. This study involves the analysis of water samples from various drinking water sources in a rural site, Mirchpur village, an Indus Valley civilization site (grid location: 29° 18′ 42.3″ N, 76° 10′ 33.0″ E) of Hisar, India, along with the health survey of human subjects. The hydrochemistry of water collected from hand pumps, river canals, tube wells, submersibles, and the RO systems installed in various homes was explored for pH, EC, TH, TDS, turbidity, cations (Na⁺, Ca²⁺, Mg²⁺), anions (CO₃²⁻, HCO₃⁻, Cl⁻, SO₄²⁻, NO₃⁻, F⁻), and elements (Fe, Pb, Se) employing the ion chromatography, flame photometry, and ICP-AES techniques. Lead (Pb) and Selenium (Se) were detected in trace amounts (0.30–2.6 μg L⁻¹; 0.10–4.1 μg L⁻¹, respectively) in all the samples, including the samples collected from RO purifiers, but Iron (Fe) was not detected in RO samples even in trace amounts. The F-levels in hand pump water (HPW) and submersible water (SW) (1.9  and 1.7 mg L⁻¹, respectively) and TDS levels in SW (3048 mg L⁻¹) were found to be above WHO and BIS safe limits. TDS levels in the river canal (900 mg L⁻¹), tube well (1104 mg L⁻¹), hand pump (1170 mg L⁻¹), and submersible samples (3048 mg L⁻¹) were found significantly higher as compared to the RO personal water (ROPW; 216 mg L⁻¹) and RO supply water (ROSW; 90 mg L⁻¹). The collected epidemiological data reveals that 21%, 19%, 13%, and 12% of natives reported skin, kidney, hair fall, liver, and stomach issues, respectively, suspecting the crucial role of high TDS and fluoride levels in the area. This study also provides a comparison between the quality of RO and the direct supply water, along with correlation matrices for different parameters, which gives a rationale for the limitations of drinking direct supply water without any purification and RO water containing low mineral content.     

Assessment of deep aquifer groundwater quality in a geographically unique climatic region of Southern Western Ghats,India using water quality indices

Water quality index (WQI) models are generally used in hydrochemical studies to simplify complex data into single values to reflect the overall quality. In this study, deep groundwater quality in the Chittur and Palakkad Taluks of the Bharathapuzha river basin of Kerala, India, was assessed by employing the WQI method developed by the Canadian Council of Ministers of the Environment (CCME). The assessment of overall water quality is indispensable due to the specific characteristics of the study area, such as geography, climate, over-drafting, and prevalent agricultural practices. Forty representative samples were collected from the study area for monsoon (MON) and pre-monsoon (PRM) seasons. The results showed a general increase of contents from MON to PRM. The major cations were spread in the order Ca²⁺>Na+>Mg²⁺>K⁺ and the anions HCO₃⁻>Cl⁻>CO₃²⁻ based on their relative abundance. Among various parameters analysed, alkalinity and bicarbonate levels during MON were comparatively high, which is indicative of carbonate weathering, and 90% of the samples failed to meet the World Health Organization (WHO, 2017)/Bureau of Indian Standards (BIS, 2012) drinking water guidelines. The CCME WQI analysis revealed that nearly 50% of the samples during each season represented good and excellent categories. The samples in the poor category comprised 10% in MON and 15% in PRM. The overall WQI exhibited 15% of poor category samples as well. The spatial depiction of CCME WQI classes helped to expose zones of degraded quality in the centre to eastward parts. The spatial and temporal variations of CCME WQI classes and different physicochemical attributes indicated the influence of common factors attributing to the deep groundwater quality. The study also revealed inland salinity at Kolluparamba and Peruvamba stations, where agricultural activities were rampant with poor surface water irrigation.