Emerging applications of green coconut: A promising lignocellulosic biomass

Waste accumulation is a grave concern and becoming a transboundary challenge for environment. During Covid-19 pandemic, diverse type of waste were collected due to different practices employed in order to fight back the transmission rate of the virus. Covid-19 was proved to be capricious catastrophe of this 20th century and even not completely eradicated from the world. The havoc created by this imperceptible quick witted, pleomorphic deadly virus can't be ignored. Though a number of vaccines have been developed by the scientists but there is a fear of getting this virus again in our life. Medical studies prove that immunity drinks will help to reduce its reoccurrences. Coconut water is widely used among all drinks available globally. Its massive consumption created an incalculable pile of green coconut shells around the different corners of the world. This practice generating enormous problem of space acquisition for the environment. Both the environment and public health will benefit from an evaluation of quantity of coconut waste that is being thrown and its potential to generate value added products. With this context, present article has been planned to study different aspects like, coconut waste generation, its biological properties and environmental hazards associated with its accumulation. Additionally, this review illustrates, green technologies for production of different value added products from coconut waste.     

Racemic,R-, and S-tebuconazole altered chitinase and chitobiase activity of Daphnia magna

Tebuconazole is a chiral trizole fungicide and widely used in many crops for controlling disease. Tebuconazole is potential toxic to some aquatic organisms but relative information of its isomers is scarce. To detect the endocrine disrupting effects and difference of rac-, R-, and S-tebuconazole, the chitinase activity in Daphnia magna and chitobiase activity in each test medium were used as biomonitors after a 14-day exposure. Results showed that chitinase activity was significantly reduced by rac-, R-, and S-tebuconazole. The chitobiase activity in the test medium was reduced by rac- and R-tebuconazole before day 10, and only one peak was observed at day 10 or day 12 compared with two obvious peaks in the control group (days 6 and 12). S-tebuconazole delayed and reduced the reproduction of D. magna, but did not delay the first chitobiase activity peak, whereas the second peak could not be characterized as the exposure concentration and time increased. Compared with chitinase activity, chitobiase activity can still be used as a rudimentary model for identifying molt-interfering xenobiotics, and further studies should focus on the analysis of correlations between these parameters.     

Factors associated with driving under the influence of alcohol

Objective: This study examined the risk factors of driving under the influence of alcohol (DUI) among drivers of specific vehicle categories (DSC). On the basis of this research, the variables related to DUI and involvement in traffic crashes were defined. The analysis was conducted for car drivers, bicyclists, motorcyclists, bus drivers, and truck drivers.

Method: The research sample included drivers involved in traffic crashes on the territory of Serbia in 2016 (60,666). Two types of analyses were conducted in this study. Logistic regression established the correlation between DUI and DSC and the The Technique for Order of Preference by Similarity to Ideal Solution (Multi-criteria decision making) method was applied to consider the scoring and explore the potential for the prevalence of DUI on the basis of 2 data sets (DUI and non DUI).

Results: The study results showed that driver error and male drivers were the 2 most significant risk factors for DUI, with the highest scores and potential for prevalence. The nonuse of restraint systems, driver experience, and driver age are the factors with a significant prediction of involvement in an accident and an insignificant prediction of DUI.

Conclusions: Following the development of the logistic prediction models for DUI drivers, testing of the model was conducted for 3 control driver groups: Car, motorcycle, and bicycle. The prediction model with a probability greater than 50% showed that 77% of car drivers were under the influence of alcohol. Similarly, the prediction percentage for motorcyclists and bicyclists amounted to 71 and 67%, respectively. The recommendation of the study is that drivers whose DUI probability is above 50% should be potentially suspected of DUI. The results of this study can help to understand the problem of DUI among specific driver categories and detect DUI drivers, with the aim of creating successful traffic safety policy.     

SMBBR-AF-SMBBR组合工艺处理高氨氮农药废水

采用特异性移动床生物膜反应器(SMBBR)和厌氧生物滤池(AF)组合工艺处理高氨氮农药废水。考察了HRT、pH和DO等工艺条件对SMBBR-AF-SMBBR组合工艺运行稳定期COD和氨氮去除率的影响。试验结果表明,在进水COD为2 408~7 440 mg/L、ρ(NH_4~+-N)为160.21~433.84 mg/L、TN为208.27~537.65 mg/L、HRT为8d、pH为8.0、DO为4 mg/L的条件下,处理后出水平均COD为342 mg/L,COD去除率达92.3%;ρ(NH_4~+-N)小于4.0mg/L,氨氮平均去除率为89.2%;TN小于50 mg/L,平均TN去除达83.0%。出水各指标均优于原A2O工艺出水。     

中国大气中重金属钒的排放特征

化石燃料原油和原煤的燃烧、含钒矿石的开采和冶炼是大气中重金属钒的主要来源。文章利用重金属钒的排放系数分析了中国1978-2010年人为过程释放到大气中重金属钒的总量和行业重金属钒的排放,预测了2020年和2030年中国大气中重金属钒的排放量。结果表明,自1978年以来,中国钒的排放量增加了4倍,中国2010年人类活动向大气排放的重金属钒总量达3.18万吨,约占世界总量的12%。原油燃烧释放到大气中的钒约占总量的85%,煤炭燃烧的排放量占10.5%,其中工业耗油向大气中释放重金属钒的比例从1980的71%下降到2008年的42%,总量从3 721 t增加至9 361 t;交通运输行业从10%上升到36%,总量从547 t增加至7 967 t;其它行业(农林牧渔水利业、批发零售业和住宿餐饮业、生活消费)基本维持在20%左右,总量从986 t增加至5 052 t。因此,应加强大气中钒的监测和管理,预防大气钒污染事件的发生。     

环氧化PVA载体固定漆酶的最佳工艺条件研究

在T=35℃,HAc-NaAc缓冲溶液pH为4的条件下,用环氧化PVA载体对漆酶进行固定化,固定后酶活为游离酶活的95%。用该固定化漆酶处理制浆造纸废水,反复使用6次后,酶活仍保持为初始酶活的45%,且每次COD去除率在40%以上,处理后的废水BOD增大了50%,废水可生化性得到很大提高。     

离子液体1-丁基-3-甲基咪唑氯盐对斜生栅藻的毒性效应

按照毒性试验标准方法研究了不同浓度离子液体1-丁基-3-甲基咪唑氯盐([BMIM]Cl)对斜生栅藻的影响,测定了半数抑制浓度(IC50)、叶绿素含量、超氧化物歧化酶(SOD)活性、过氧化氢酶(CAT)活性以及藻细胞通透性的变化,观察了80mg/L[BMIM]Cl处理96h对藻细胞的影响.结果表明:[BMIM]Cl对斜生栅藻生长具有抑制作用,随着浓度的增大抑制率增加,叶绿素含量下降, 48h IC50、72h IC50和96h IC50分别为103.77、76.44和68.49mg/L.藻细胞对[BMIM]Cl有一定的氧化应激反应,CAT和SOD活性随[BMIM]Cl浓度升高而降低.[BMIM]Cl对藻细胞的细胞膜有一定程度的破坏作用,藻细胞通透性随浓度升高而增大,同时藻细胞的超微结构受到了[BMIM]Cl的影响,造成质壁分离,叶绿体片层断裂,线粒体嵴数量减少.     

非离子表面活性剂对污泥调理脱水效果的影响

现有污泥脱水技术仅使污泥含水率降到80%左右,难以满足日益严格的污泥处置要求.以污泥比阻（SRF）、脱水率为考察指标,比较了两大类非离子型表面活性剂（辛基酚聚氧乙烯醚OPEO型和烷基糖苷APG）对剩余污泥的脱水效果,并对原泥及调理后污泥进行了显微观察.结果表明,非离子表面活性剂可使污泥絮体粒径变小,不规则程度降低,改善了污泥的脱水性能,而且烷基糖苷APG脱水效果优于OPEO型.APG投加量为0.05%干固体时,污泥比阻即可降低到原泥的42%,脱水率可达到93%.以烷基糖苷APG为调理剂进行板框脱水实验,结果表明,当APG投加量为0.05%干固体时,脱水泥饼含水率比原泥脱水泥饼含水率低约10%,脱水率可达到97%.本研究为APG应用于污泥脱水,改善污泥脱水性能提供一些参考.     

高效木薯渣分解复合菌群RXS的构建及其发酵特性研究

从富含腐烂纤维质的环境中取样,通过以木薯渣及滤纸为碳源的蛋白胨纤维素培养基不断地富集培养,构建了一组高效稳定的纤维质分解复合菌群.考察了该复合菌群对不同纤维质底物的分解性能及其在木薯渣水解过程中主要参数的变化.研究发现该复合菌群对滤纸、脱脂棉、微晶纤维素、麦秸秆和木薯渣等原料均能够进行有效的降解.在该复合菌群应用于木薯渣的水解过程中,监测发现纤维素酶、半纤维素酶、果胶酶等关键酶的酶活力分别在第2～3 d达到最大值34.4、90.5和15.8U;经过10 d的发酵后,木薯渣中的纤维素、半纤维素及木质素分别降解了79.8%、85.9%和19.4%,且木薯渣的失重高达61.5%;此外,代谢产物主要是乙酸、丁酸、己酸和甘油;而溶解性COD、总糖和总挥发酸的变化表明第2 d时木薯渣的水解率最高.上述结果表明,该复合菌群能够有效地水解木薯燃料酒精生产过程中的废弃物木薯渣,并有望用于木薯渣高效沼气发酵的前处理中.     

Modelling sulphate-enhanced cadmium uptake by Zea mays from nutrient solution under conditions of constant free Cd2+ ion activity

A controlled hydroponic experiment was undertaken to investigate Cd uptake in relation to the activity of Cd species in solution other than the free ion (Cd²⁺) by maintaining a constant Cd²⁺ activity under variable SO₄₂⁻ and Cl⁻ concentrations exposed to maize (Zea mays var. Cameron) plants. The objectives of these experiments were: (1) to distinguish and quantify the different uptake rates of free and inorganic-complexed Cd from nutrient solution, and (2) to model the uptake of Cd by maize with a Biotic Ligand Model (BLM) in a system which facilitates the close examination of root characteristics. Results of the current experiments suggest that, in addition to the free ion, CdSO₄⁰ complexes are important factors in determining Cd uptake in nutrient solution by maize plants. Higher nominal SO₄²⁻ concentrations in solution generally resulted in a greater Cd accumulation by maize plants than predicted by the Cd²⁺ activity. A better integration of the complete dataset for the 3 harvest times (6, 9 and 11 days after treatment) was achieved by including consideration of both the duration of Cd exposure and especially the root surface area to express Cd uptake. Similarly, the fit of the BLM was also improved when taking into account exposure time and expressing uptake in terms of root morphological parameters.