土壤监测质量保证与质量控制

质量保证与质量控制措施是土壤监测工作在具体开展过程中确保其监测结果准确性、代表性、全面性的重要措施,同时也是土壤监测工作在具体开展过程中的核心工作内容。在环境保护与可持续发展战略情况下,采取全面有效的质量保证与质量控制措施可以确保并优化土壤监测结果的真实性、准确性和全面性,对促进土壤监测工作的优化发展具有非常重要的意义。基于此,本文针对土壤监测工作开展过程中应当实施的各项质量保证与质量控制措施进行了分析总结。     

考虑儿童运动特性的小学教学楼楼梯间人员疏散研究

为研究小学教学楼楼梯间人员运动行为以及影响人员疏散的因素，开展人员疏散实验并构建疏散模拟场景。基于疏散实验研究不同实验场景的出口流量和人员运动速度，通过疏散仿真模拟，分析不同人员运动速度、人员数量及疏散策略对疏散的影响。结果表明:排队下楼的人员运动速度比紧急疏散人员低22.7%，自由上楼人员运动速度比排队上楼人员高8%；人员总疏散时间随人员运动速度的增加而降低，但总疏散时间随速度增加而降低的幅度变小；加入分层疏散策略会增加人群疏散总时间，但整个疏散过程人员分布均匀，在建筑瓶颈不易产生人员过度拥挤现象，因而在疏散过程中应适当采用分层疏散策略。     

突发事件下安全舆情的传播与演变——以江苏响水天嘉宜化工有限公司“3.21”特别重大爆炸事故为例

为明确突发事件安全舆情传播与演变路径，提高企业防控突发事件安全舆情传播风险能力，降低衍生灾害发生概率，在文献分析及事故致因理论基础上，构建突发事件安全舆情传播与演变过程的系统动力学（SD）模型，并运用Vensim软件对以江苏响水天嘉宜化工有限公司“3.21”特别重大爆炸事故为例进行仿真实验，模拟安全舆情传播与演变动态过程。结果表明:突发事件安全舆情传播与演变主要受事件自身、媒体、相关企业监管层、相关企业执行层4个主体的共同影响，其中事件自身因素起效时间最早，相关企业监管层影响作用最大、维持时间最持久，相关企业执行层影响最直接。     

地铁多线换乘车站火灾模型实验研究—(1)模型装置设计

为研究地铁网络化运营枢纽车站火灾烟气扩散特征和防排烟技术，根据工程资料和标准规范对典型多线换乘车站进行1∶10火灾实验模型设计，并依据设计方案完成车站模型主体结构和通风排烟系统的搭建，同时在各个防烟分区设计安装温度、流速、烟气浓度和热辐射测量装置，可实现对“T”形、“十”形和“L”形换乘等不同换乘形式车站的火灾场景模拟和危险参数测量。研究结果表明:该模型装置能够开展一系列针对不同换乘形式和通风模式的火灾实验，对于全面揭示大型换乘车站火灾烟气运动规律、验证并优化火灾防排烟设计方法、支撑复杂结构枢纽车站火灾烟气控制技术具有重要意义。     

In situ formation of bimetallic FeNi nanoparticles on sand through green technology: Application for tetracycline removal

• In situ preparation of FeNi nanoparticles on the sand via green synthesis approach. • Removal of tetracycline using GS-FeNi in batch and column study. • Both reductive degradation and sorption played crucial role the process. • Reusability of GS-FeNi showed about 77.39±4.3% removal on 4th cycle. • TC by-products after interaction showed less toxic as compared with TC. In this study, FeNi nanoparticles were green synthesized using Punica granatum (pomegranate) peel extract, and these nanoparticles were also formed in situ over quartz sand (GS-FeNi) for removal of tetracycline (TC). Under the optimized operating conditions, (GS-FeNi concentration: 1.5% w/v; concentration of TC: 20 mg/L; interaction period: 180 min), 99±0.2% TC removal was achieved in the batch reactor. The removal capacity was 181±1 mg/g. A detailed characterization of the sorbent and the solution before and after the interaction revealed that the removal mechanism(s) involved both the sorption and degradation of TC. The reusability of reactant was assessed for four cycles of operation, and 77±4% of TC removal was obtained in the cycle. To judge the environmental sustainability of the process, residual toxicity assay of the interacted TC solution was performed with indicator bacteria (Bacillus and Pseudomonas) and algae (Chlorella sp.), which confirmed a substantial decrease in the toxicity. The continuous column studies were undertaken in the packed bed reactors using GS-FeNi. Employing the optimized conditions, quite high removal efficiency (978±5 mg/g) was obtained in the columns. The application of GS-FeNi for antibiotic removal was further evaluated in lake water, tap water, and ground water spiked with TC, and the removal capacity achieved was found to be 781±5, 712±5, and 687±3 mg/g, respectively. This work can pave the way for treatment of antibiotics and other pollutants in the reactors using novel green composites prepared from fruit wastes.     

Study on the dynamic response of polyurea coated steel tank subjected to blast loadings

Steel tanks are widely used in the storage of various chemical liquids, and the blast resistance of the tanks is very important because of the explosiveness of these liquids. To explore a feasible method to improve the blast resistance of steel tanks, the effect of polyurea coating on the blast resistance of steel storage tank is investigated in this paper. The responses of monolithic steel tanks and polyurea coated tanks under blast loads are studied by field blast experiments using TNT explosive, and the results shows that the polyurea layers are effective in reducing the maximum and residual displacements of the tank. Numerical simulations are performed and validated, and the deformation process and stress and strain distribution of the tanks are analyzed accordingly. The increase on the bending moment of the plastic hinge lines of the tanks and the increase of the area density of the cylindrical shell induced by the polyurea layers are believed to be the two main factors contributing to the displacement reduction effect of polyurea in this paper. The validated numerical model is used to study the influence of polyurea layer's thickness on the deflection of the tank, and a nearly inversely proportional relationship between the thickness and the maximum displacement is found. Three deformation modes of the tanks are identified when subjected to blast load with varying intensity and it is found that the displacement reduction effect of polyurea varies in different deformation modes.     

添加H2O2加速低合金钢海水腐蚀的主要影响因素研究

采用极化曲线、旋转圆盘电极试验和失重（质量损失）法研究了低合金钢在添加了H。o：的海水中腐蚀加速的主要影响因素。结果发现低合金钢在添加H2O2的海水中腐蚀加速主要受到了H2O2浓度、温度、搅拌速度和H2O2添加周期的影响。研究表明,搅拌速度不变、H2O2添加周期相同的条件下,在H2O2浓度为0．8mol／L的70℃海水中,低合金铜的腐蚀加速最显著;在试验的转速范围内,加速作用随搅拌速度增大变得更为显著;H2O2加入后350min内加速作用较明显。     

电催化氧化法处理阳离子染料废水的试验研究

以结晶紫作为阳离子染料,采用电催化氧化法对阳离子染料溶液进行了电解脱色处理试验,研究了电流密度、电解质种类、电解质浓度、pH值等对该溶液脱色率的影响,测定了电解时溶液中生成的余氯浓度和溶液的紫外-可见吸收光谱曲线,并对不同电解时间的溶液的吸光度进行了归一化计算。结果表明:随着电解时间的延长,水溶液中活性氯浓度不断上升,经一定时间后达到最大值;在电催化和活性氯的协同作用下,阳离子染料结晶紫分子中的大π共轭体系被破坏、苯环结构基本瓦解,溶液快速脱色;在电流密度为5.1mA/cm2、NaCl浓度为4g/L、pH值为9.41的条件下,初始浓度为100mg/L的结晶紫溶液经过20min的电解,其脱色率可高达98.31%。     

内循环活性炭生物流化床处理农药生产废水的试验研究

采用内循环活性炭生物流化床反应器处理某农药厂生产废水,通过试验研究了该反应器在室温条件下处理农药生产废水的性能.结果表明:当进水pH值控制在7.0～7.5、水力停留时间为6h、曝气量控制在使活性炭处于流化状态时,CODcr的去除率为50％,总氮的去除率为32.33％,同时可生化性明显提高,生物毒性有所降低.     

芬顿氧化试验中残余双氧水对CODcr测定的影响研究

在采用Fenton高级氧化技术对垃圾压滤液进行处理时,作为氧化剂的双氧水经常不能完全消耗。而使用重铬酸钾法进行CODcr测定时,待测水体中残余的双氧水会表现出还原性而消耗重铬酸钾,对最终CODcr测定结果产生影响。本文分析了在垃圾压滤液中不同浓度双氧水对CODcr测定的影响大小,得出双氧水浓度对CODcr影响曲线,同时为消除双氧水对CODcr测定结果影响,在试验中投加过量硫酸亚铁与双氧水反应,当投加量达到理论反应量的1.0～1.2倍时,对双氧水去除效果最好,使后续的CODcr测定试验更加准确。