Identification and characterization of extracted microplastics from agricultural soil near industrial area: FTIR and X-ray diffraction method

Microplastics have been found in large quantities in agricultural soil and now become a major global issue. Different types of microplastic have adverse effects on agricultural soil. The most widely used method for the extraction of microplastics in agricultural soil is the density floatation method by using saturated NaCl solution. This method includes the pre-digestion of soil samples with H₂O₂ to remove all the organic matter present in the soil. Different types of microplastic particles were extracted and identified by using ATR-FTIR viz polypropylene, polybutylene tetrapthalate, polyethylene, polystyrene, and polyethylene tetrapthalate. The crystalline nature of extracted microplastic was checked by employing XRD analytical technique. Floatation with higher density saturated sodium chloride (NaCl) solution recovered approximately 80% MPs from soil. Floatation methods were found to be effective for extracting microplastics from soils.     

Flotability and flotation separation of polymer materials modulated by wetting agents

The surface free energy, surface tension and contact angles were performed to investigate the properties of wetting agents. Adsorption of wetting agents changes wetting behavior of polymer resins. Flotability of polymer materials modulated by wetting agents was studied, and wetting agents change significantly flotability of polymer materials. The flotability decreases with increasing the concentration of wetting agents, and the wetting ability is lignin sulfonate (LS) > tannic acid (TA) > methylcellulose (MC) > triton X-100 (TX-100) (from strong to weak). There is significant difference in the flotability between polymer resins and plastics due to the presence of additives in the plastics. Flotation separation of two-component and multicomponent plastics was conducted based on the flotability modulated by wetting agents. The two-component mixtures can be efficiently separated using proper wetting agent through simple flotation flowsheet. The multicomponent plastic mixtures can be separated efficiently through multi-stage flotation using TA and LS as wetting agents, and the purity of separated component was above 94%, and the recovery was more than 93%.     

固相萃取-GC/MS法测定地表水中3-甲基吲哚

采用微球硅胶键合C_(18)固相萃取柱萃取水样中的3-甲基吲哚,并用气质联用法测定,方法在0 mg/L~10.0 mg/L范围内线性良好,方法检出限为0.2μg/L。空白水样3个质量浓度水平的加标回收率为89%~94%,7次测定结果的RSD为2.3%~6.9%。用该方法测定7个实际地表水样品,其中4个地表水样品检出3-甲基吲哚,地表水样的加标回收率为81.5%~97.0%。     

混凝一气浮控制三卤甲烷生成势的研究

研究了混凝一气浮工艺对不同分子量区间三卤甲烷生成势（trihalomethanes formation potential，THMFP）的去除效果及絮体形态对THMFP去除效果的影响。结果表明，混凝一气浮工艺以去除大分子量区间THMFP为主，对小分子量区间THMFP的去除效果较差。UV254值与THMFP值的线性相关系数为0．9449，UV254值可以较好地反映THMFP的含量。絮体的分形维数为1．17～1．2时，孔隙率较大，可增加絮体对THMFP的活性吸附空间，且絮体相对密度较小，可增强同向絮凝作用，增加絮体和THMFP的接触概率，有利于气浮对THMFP的去除。     

低温低浊微污染水源水预氧化处理工艺设计

选用预氧化处理工艺以提高混凝絮凝效果,减少停留时间从而实现在小型设备中较高的处理量;占地面积小且速度快的气浮池代替了普通的沉淀池,并在混凝沉淀处理药剂和消毒处理药剂上选择了在低温条件下效果好的.     

A metal-free composite photocatalyst of graphene quantum dots deposited on red phosphorus

A simple approach to enhance the photocatalytic activity of red phosphorus(P) was developed.A mechanical ball milling method was applied to reduce the size of red P and to deposit graphene quantum dots onto red P. The product was characterized by scanning electron microscopy, transmission electron microscopy, contact angle measurements, zeta-potential measurements, X-ray diffraction and UV–vis absorption spectroscopy. The product exhibited high visible-light-driven photocatalytic performance in the photodegradation of rhodamine B.     

低纬高原大气电场特征及其在预警中的应用

通过对2006年7月- 2007年6月云南地闪定位网探测资料和玉溪大气电场仪资料分析,研究了高原晴天大气电场和雷暴天气过程的电场演变特征.结果表明:高原晴天大气电场具有明显的日变化和月变化特征.低纬高原地区雷暴云具有偶极性和三极性两种结构,但大多数雷暴具有偶极性电荷结构,不同电荷结构的雷暴云的放电特征不同,偶极性时主要为负地闪,地闪活动较活跃；三极性时主要是正地闪,地闪活动较少.根据雷暴云近地面电场变化特征,探讨了大气电场仪预警地闪的方法,首次提出极性变化预警法,其命中率和提前预警时间都明显优于阈值预警法.     

含泥钾矿浮选分离技术研究

从钾矿性质和浮选技术2个方面对盐湖含泥钾矿进行资源化利用研究,首先运用X射线荧光光谱、X射线衍射和扫描电镜对含泥钾矿的矿泥化学组成及其结构特征进行了分析,其次选用盐酸十八胺和煤油为浮选药剂,对浮选法脱除钾矿中泥进行了研究.结果表明,盐湖矿泥中70%以上为以长石、粘土和粉砂等为主的硅铝酸盐;矿泥多充填包裹于盐类矿物粒晶间...     

Co-composting of Paper Mill Sludge and Hardwood Sawdust Under Two Types of In-Vessel Processes

Abstract

Recycling of organic residues by composting is becoming an acceptable practice in our society. Co-composting dewatered paper mill sludge (PMS) and hardwood sawdust, two readily available materials in Canada, was investigated using uncontrolled and controlled in-vessel processes. The composted materials were characterized for total C and N, water-soluble, acid-hydrolyzable, and non-hydrolyzable N, extractable lipids, and by Fourier Transform Infrared (FT-IR) spectrophotometry. In the controlled scale process, the loss of organic matter was approximately 65% higher than in the uncontrolled process. After undergoing initial fluctuations in N fractions during the first two days of composting, by the end of the process, concentrations of water-soluble N decreased while those of acid-hydrolyzable and nonhydrolyzable N increased in the controlled process, whereas in the uncontrolled process, water-soluble N increased, but N in the other two fractions decreased continuously, indicating that the biochemical transformations of organic matter were not completed. Data on extractable lipids and FT-IR spectra suggest that the compost produced from the controlled process was bio-stable after 14 days, while the uncontrolled process was not stabilized after 18 days. In addition, FT-IR data suggest the biological activity during composting centered mainly on the degradation of aliphatic structures while aromatic structures were preserved. The co-composting of the PMS and hardwood sawdust can be successfully achieved if aeration, moisture, and bio-available C/N ratios are optimized to reduce losses of N.     

典型气浮净水设备评述

文章主要从气浮设备的原理与结构、优缺点、应用情况等方面评述了加压溶气气浮设备、涡凹气浮设备、浅层气浮设备、电气浮设备、充气水力旋流器、多段环流气浮塔和旋流-充气气浮系统等气浮设备,并讨论了气浮设备的研究和应用发展趋势。