Climate readiness of recovery plans for threatened Australian species

The rapidly changing climate is posing growing threats for all species, but particularly for those already considered threatened. We reviewed 100 recovery plans for Australian terrestrial threatened species (50 fauna and 50 flora plans) written from 1997 to 2017. We recorded the number of plans that acknowledged climate change as a threat and of these how many proposed specific actions to ameliorate the threat. We classified these actions along a continuum from passive or incremental to active or interventionist. Overall, just under 60% of the sampled recovery plans listed climate change as a current or potential threat to the threatened taxa, and the likelihood of this acknowledgment increased over time. A far smaller proportion of the plans, however, identified specific actions associated with ameliorating climate risk (22%) and even fewer (9%) recommended any interventionist action in response to a climate-change-associated threat. Our results point to a disconnect between the knowledge generated on climate-change-related risk and potential adaptation strategies and the extent to which this knowledge has been incorporated into an important instrument of conservation action.     

采油作业“三废”控制技术研究与应用

针对采油作业产生的废酸、固废、废水处理成本高、技术不成熟等问题,研发改性废酸降压增注、深部调剖技术;高比重污泥悬浮研磨后的固废处理技术;低耗水打塞、原井液+CaCl2压井、原井液处理再利用技术,减少了"三废"的产生,解决了"三废"环保处理费高等问题,消除了环保隐患,实现了清洁生产,环境效益显著。     

应用高频气力分选机分选电子废料碎片的研究

进行了实验室高频气力分选机分选3～0.3 mm印刷电(线)路板模拟物料的研究.结果表明,在振频为1 621次/min,上升风量为120 m3/h,95 m3/h,60 m3/h,床面横向倾角6.64°,纵向倾角为1.07°时,金属回收率达93.95%;重产物金属品位为89.19%;轻产物中非金属的品位达99.33%.0.5～0.3 mm细粒物料的分选效果也是令人满意的.     

中国矿山地质环境恢复治理激励机制探索研究

目前,中国矿山地质环境恢复治理形势依然严峻,国家高度重视矿山地质环境恢复与治理工作,财政部、国土资源部不断加大矿山地质环境治理资金,但目前资金缺口仍然很大。文章通过梳理中国矿山地质环境恢复治理激励机制建设创新做法,总结各省开展矿山地质环境恢复治理"五结合"激励模式实践探索,并针对我们矿山地质环境治理目前存在的主要困难和问题提出了引入市场机制出台土地使用权,及尽快出台国家层面的鼓励政策等多方面的优惠政策等建议。     

王坡井田煤层气井采出水处理方法研究

针对王坡井田煤层气井采出水中污染物含量低,仅CODcr超出国家一级排放标准(GB 8978-1996)的特点,采用活性炭吸附处理,然后通过絮凝沉降迅速回收采出水中悬浮活性炭。结果表明:活性炭投加量为3g/L、吸附时间为40 min,PAM投加量为2 mg/L,沉降时间为5 min,活性炭回收率为98.35%,处理后采出水CODcr为45.45 mg/L、SS为7 mg/L,达到国家一级排放标准(GB 8978-1996)。     

Microbial community functional structure in response to micro-aerobic conditions in sulfate-reducing sulfur-producing bioreactor

Limited oxygen supply to anaerobic wastewater treatment systems had been demonstrated as an effective strategy to improve elemental sulfur(S0) recovery, coupling sulfate reduction and sulfide oxidation. However, little is known about the impact of dissolved oxygen(DO) on the microbial functional structures in these systems. We used a high throughput tool(GeoChip) to evaluate the microbial community structures in a biological desulfurization reactor under micro-aerobic conditions(DO: 0.02–0.33 mg/L). The results indicated that the microbial community functional compositions and structures were dramatically altered with elevated DO levels. The abundances of dsrA/B genes involved in sulfate reduction processes significantly decreased(p 0.05, LSD test) at relatively high DO concentration(DO: 0.33 mg/L). The abundances of sox and fccA/B genes involved in sulfur/sulfide oxidation processes significantly increased(p 0.05, LSD test) in low DO concentration conditions(DO: 0.09 mg/L) and then gradually decreased with continuously elevated DO levels. Their abundances coincided with the change of sulfate removal efficiencies and elemental sulfur(S0) conversion efficiencies in the bioreactor. In addition, the abundance of carbon degradation genes increased with the raising of DO levels, showing that the heterotrophic microorganisms(e.g., fermentative microorganisms) were thriving under micro-aerobic condition. This study provides new insights into the impacts of micro-aerobic conditions on the microbial functional structure of sulfatereducing sulfur-producing bioreactors, and revealed the potential linkage between functional microbial communities and reactor performance.     

Ultrasonic preparation of nano-nickel/activated carbon composite using spent electroless nickel plating bath and application in degradation of 2,6-dichlorophenol

Ni was effectively recovered from spent electroless nickel （EN） plating baths by forming a nano-nickel coated activated carbon composite. With the aid of ultrasonication, melamine- formaldehyde-tetraoxalyl-ethylenediamine chelating resins were grafted on activated carbon （MFT/AG）. PdC12 sol was adsorbed on MFT/AC, which was then immersed in spent electroless nickel plating bath; then nano-nickel could be reduced by ascorbic acid to form a nano-nickel coating on the activated carbon composite （Ni/AC） in situ. The materials present were carefully examined by Fourier transform infrared spectroscopy, X-ray diffraction, field emission scanning electron microscopy, X-ray photoelectron spectroscopy and electro- chemistry techniques. The resins were well distributed on the inside and outside surfaces of activated carbon with a size of 120 ± 30 nm in MFT/AC, and a great deal of nano-nickel particles were evenly deposited with a size of 3.8 ± 1.1 nm in Ni/MFT. Moreover, Ni/AC was successfully used as a catalyst for ultrasonic degradation of 2.6-dichloronhenol.     

Enhanced struvite recovery from wastewater using a novel cone-inserted fluidized bed reactor

The feasibility of struvite recovery at low （12.5 mg/L） and high （120 mg[L） phosphorus concentrations was studied by constructing a novel fluidized bed reactor with cones （FBRwc） and without cones （FBRwoc）. The crystallization process was continuously operated for 133 days under different hydraulic retention times （HRT = 1-10 hr）, pH （7.5-10）, and molar ratios of Mg/P （0.75-1.75）, N/P （1-10） and Ca/Mg （0-2）. The optimum operating conditions of HRT, pH, Mg/P and N/P molar ratios were found to be 2 hr, 9, 1.25, and 7.5, respectively. Under these optimum conditions, the phosphorus precipitation efficiencies of FBRwc were 93% for low and 98% for high phosphorus influent; however, the efficiencies were 78% and 81% for FBRwoc, respectively. Due to crystal losses at each junction （17%-31%）, the crystal recovery efficiency of FBRwoc was relatively low （47%-65%） for both influent concentrations. However, the losses were minimal in FBRwc, which showed 75% and 92% crystal recovery for low and high phosphorus concentrations, respectively. At low calcium concentration, crystal chemical analysis showed the product to be pure struvite （〉 99%）. The scanning electron microscope and X-ray diffraction results further confirmed that the crystal recovered from FBRwc contained pure struvite, which could be considered a high quality fertilizer. Except HRT, all parameters （pH, Mg/P, N/P and Ca/Mg） were found to be influencing factors for FBRwc performance. Overall, inserting cones in each part of the reactor played a significant role in enhancing struvite recovery from a wide range of phosphorus-containing wastewater.     

磷回收对厌氧/好氧交替式生物滤池蓄磷/除磷的影响

为能提高生物除磷系统的除磷/回收磷效率,研究采用厌氧/好氧交替式生物滤池(AABF)处理低碳磷比废水,观察利用周期性扩增进水碳源进行磷回收时,生物滤池除磷效率及生物膜内微生物特性的变化.通过分析生物滤池除磷效率变化,生物膜多聚物染色、扫描电镜(SEM)观察以及荧光原位杂交(FISH)技术分析生物滤池系统实施周期性磷回收对生物膜内微生物菌群形态与组成的影响.结果发现,生物滤池在先后经历3次生物蓄磷-磷回收(PB-PR)的运行操作过程中,生物滤池除磷效率分别由磷回收前的60.3%、82.9%、86.6%提高到磷回收后的87.2%、91.2%、93.5%;生物滤池生物膜内优势菌群形态逐渐由大球菌演变为小球菌、杆菌与丝状菌;经过连续3个周期的PB-PR操作,生物滤池底部生物膜中聚磷菌所占比例由43%提高至70%;聚磷菌群在生物膜内混合菌群中的比例随着上流式生物滤池高度的增加而不断提高.结果表明,采用周期性的碳源扩增与回收磷的操作,可以提高生物滤池除磷效率;引起生物滤池生物膜内微生物菌群形态与组成发生变化,促进聚磷菌成为优势菌群.     

基于灰色理论的废弃电路板金属回收模型研究

电子废弃物的资源化既能实现资源的二次利用,又能防止环境污染,具有重要的理论意义和应用价值.运用灰色理论对离心复合力场回收废弃电路板金属过程中反冲水、转速和浓度等操作参数对分选效果(精矿品位和精矿的回收率)的影响进行了研究,建立了基于GM(0,N)灰色模型的离心复合力场回收废弃电路板分选模型.经验证模型精度较高.