Photosynthesis and related metabolic mechanism of promoted rice (Oryza sativa L.) growth by TiO2 nanoparticles

• The rice growth was promoted by nano-TiO₂ of 0.1–100 mg/L. • Nano-TiO₂ enhanced the energy storage in photosynthesis. • Nano-TiO₂ reduced energy consumption in carbohydrate metabolism and TCA cycle. Titanium dioxide nanoparticle (nano-TiO₂), as an excellent UV absorbent and photo-catalyst, has been widely applied in modern industry, thus inevitably discharged into environment. We proposed that nano-TiO₂ in soil can promote crop yield through photosynthetic and metabolic disturbance, therefore, we investigated the effects of nano-TiO₂ exposure on related physiologic-biochemical properties of rice (Oryza sativa L.). Results showed that rice biomass was increased >30% at every applied dosage (0.1–100 mg/L) of nano-TiO₂. The actual photosynthetic rate (Y(II)) significantly increased by 10.0% and 17.2% in the treatments of 10 and 100 mg/L respectively, indicating an increased energy production from photosynthesis. Besides, non-photochemical quenching (Y(NPQ)) significantly decreased by 19.8%–26.0% of the control in all treatments respectively, representing a decline in heat dissipation. Detailed metabolism fingerprinting further revealed that a fortified transformation of monosaccharides (D-fructose, D-galactose, and D-talose) to disaccharides (D-cellobiose, and D-lactose) was accompanied with a weakened citric acid cycle, confirming the decrease of energy consumption in metabolism. All these results elucidated that nano-TiO₂ promoted rice growth through the upregulation of energy storage in photosynthesis and the downregulation of energy consumption in metabolism. This study provides a mechanistic understanding of the stress-response hormesis of rice after exposure to nano-TiO₂, and provides worthy information on the potential application and risk of nanomaterials in agricultural production.     

Study on the dynamic response of polyurea coated steel tank subjected to blast loadings

Steel tanks are widely used in the storage of various chemical liquids, and the blast resistance of the tanks is very important because of the explosiveness of these liquids. To explore a feasible method to improve the blast resistance of steel tanks, the effect of polyurea coating on the blast resistance of steel storage tank is investigated in this paper. The responses of monolithic steel tanks and polyurea coated tanks under blast loads are studied by field blast experiments using TNT explosive, and the results shows that the polyurea layers are effective in reducing the maximum and residual displacements of the tank. Numerical simulations are performed and validated, and the deformation process and stress and strain distribution of the tanks are analyzed accordingly. The increase on the bending moment of the plastic hinge lines of the tanks and the increase of the area density of the cylindrical shell induced by the polyurea layers are believed to be the two main factors contributing to the displacement reduction effect of polyurea in this paper. The validated numerical model is used to study the influence of polyurea layer's thickness on the deflection of the tank, and a nearly inversely proportional relationship between the thickness and the maximum displacement is found. Three deformation modes of the tanks are identified when subjected to blast load with varying intensity and it is found that the displacement reduction effect of polyurea varies in different deformation modes.     

呼和浩特市工业料堆扬尘排放清单研究

颗粒物污染是影响中国城市空气质量的首要因素。工业料堆扬尘是城市大气颗粒物污染的主要来源之一。本文通过对呼和浩特市建成区内典型行业风蚀、作业及交通运输扬尘进行采样分析,应用美国AP-42提供的模型,以2006年作为基准年,建立了呼和浩特市工业料堆排放清单。研究结果表明:呼和浩特市建成区内工业料堆扬尘排放量为TSP:5 305 t/a,PM10:1 012 t/a,PM2.5:267 t/a。从空间分布看玉泉区工业料堆扬尘排放量最大,其次是赛罕区。行业分布上排放最大的行业是建材工业,其次是电力热力工业,最少的是化工工业。在各行业类别的工业料堆排放量中,交通运输扬尘排放量是最大的。     

中国泥炭地有机碳储量与储存特征分析

根据全国泥炭资源调查的结果, 运用有机质含量、干容重、泥炭储量、泥炭地面积等数据估算中国泥炭地有机碳储量,并探讨其碳储存特征.结果表明,我国泥炭地有机碳总储量约15.03亿t.在各省和各气候区分布不均匀,四川省(6.45亿t)和云南省(2.91亿t)泥炭地有机碳储量最丰富,占总储量的62.29%.各气候区中高原湿润区泥炭地有机碳储量最大(7.14亿t),特别是若尔盖高原泥炭地有机碳储量(6.30亿t)占总储量的41.92%.我国泥炭地有机碳密度一般在80~140kg/m3, 最大值为270~360kg/m3,最小值小于80kg/m3,其分布以燕山、太行山至横断山为界,西北部低,东南部高.泥炭地单位面积有机碳储量均值为143.97kg/m2,滇南高原最高,达到637.06kg/m2.区域平均泥炭地有机碳积累强度为208.23 t/km2,若尔盖高原最高达3972.71t/km2.     

Novel Co-Mg-Al-Ti-O catalyst derived from hydrotalcite-like compound for NO storage/decomposition

Catalysts of Co_1.5Mg_1.5/Al_0.9Ti_0.1O and Co_1.5Mg_1.5/AlO were successfully prepared by calcinations of corresponding hydrotalcite-like compounds at 800℃ for 4 hr. The derived oxides were of spinel phase and a small quantity of Ti substitution did not change the crystal purity. Their catalytic performance for the NO storage/decomposition was investigated. Ti incorporation enhanced the NO decomposition activity while has an opposite effect on the storage capacity of catalyst. In situ FT-IR spectra of the catalysts showed that the final adsorption species on the catalysts was coordinated nitrates/nitrites. In addition, NO storage/decomposition mechanism has been discussed on the basis of these observations.     

Review of hydrogen safety during storage,transmission, and applications processes

Hydrogen is considered an excellent clean fuel with potential applications in several fields. There are serious safety concerns associated with the hydrogen process. These concerns need to be thoroughly understood and addressed to ensure its safe operation. To better understand the safety challenges of hydrogen use, application, and process, it is essential to undertake a detailed risk analysis. This can be achieved by performing detailed consequence modellings and assessing risk using the computational fluid dynamics (CFD) approach. This study comprehensively reviews and analyses safety challenges related to hydrogen, focusing on hydrogen storage, transmission, and application processes. Range of release and dispersion scenarios are investigated to analyse associated hazards. Approaches to quantitative risk assessment are also briefly discussed.     

FPSO泡沫灭火系统的有效性研究

从泡沫灭火剂的选择、种类特性、取样送检要求、兼容性等几方面对FPSD泡沫灭火系统的有效性进行了研究,旨在从泡沫灭火系统的设计、采办、布局、安装、调试、操作及日常维护等整个生产周期出发,确保FPSO泡沫灭火系统的完整、可用和有效,以期为油田的安全开发提供参考。     

野战弹药储存防热现状及温度指标论证

分析了野战弹药的储存防热现状,论证了野战弹药储存防热的温度指标。通过对火炸药储存性能参数的计算并结合我国的实际气候状况,确定了野战弹药的储存防热指标为环境温度应控制在40℃以下。最后,提出了今后野战弹药储存防热的研究方向。     

长期施肥对红壤稻田耕层土壤碳储量的影响

以红壤性稻田土壤为对象,研究了长期施肥（1990～2006年）对稻田表层土壤碳储量及固碳潜力的影响,讨论了耕层厚度变化对碳储量估算及处理间差异的影响.研究发现,与长期施用化肥相比,有机物的循环利用能显著提高红壤性稻田土壤碳储量,其碳储量为57.7～66.2 t/hm²,比试验前高出18.7～27.2 t/hm²,而长期施用化肥碳储量提高幅度平均为5.4 t/hm².红壤性稻田土壤饱和固碳量为84.0 t/hm²,与目前碳储量相比还有17.8～43.7 t/hm²的固碳潜力.研究证实,土壤碳储量与土壤容重和表层土壤厚度的变化密切相关,以20 cm或23 cm作为统计厚度估算表层土壤的碳储量将分别低估20.6％和11.3％,其中有机物施用处理碳储量低估幅度最大（分别为26.8％和18.9％）;另外,用相同统计厚度进行碳储量估算减小了不同施肥处理间的差异.从稻田土壤碳储量及固碳潜力来考虑,有机物配合化肥施用是红壤稻田较优的施肥方式.     

某型固体继电器储存性能退化规律研究

选用某型固体继电器在A、B、c、D等4地开展了为期131个月的库房储存试验,跟踪测试了其性能参数。应用F-检验和T-检验对其性能参数的测试数据进行了分析研究,结果表明储存131个月后,输入电流和输出接通电阻在4地有显著性的变化。通过研究4地试验样品性能参数的退化量,结果表明所有性能参数中输出接通电阻的退化量最大;4地相比,C地试验样品的输出接通电阻的退化量是最大的,A地试验样品的输出接通电阻的退化量是最小的。因此,A地最适合该型固体继电器的储存。