高中速过滤器的选择

介绍了高中速过滤器的应用环境、工作原理和结构组成,并从结构组成及工艺环境和实际应用性价比方面,提出实际工作时选择高中速过滤器的注意事项。     

袋式除尘器和静电除尘器在电厂除尘系统中运用的性能对比分析

针对目前火电厂除尘系统应用现状和当前环保要求,通过对袋式除尘器和静电除尘器在火电厂燃煤锅炉除尘系统中的应用,对袋式除尘器和静电除尘器在技术性能上的差异作了简单的对比分析,以指导除尘器在目前火电厂燃煤锅炉除尘系统中的具体应用。     

Window Sensitivity Functions for Line Transect Sampling

L and width 2w, then by a selection of viewing window is meant a choice of w, with the intent being to search for optimal viewing windows, with the goal in mind of improving variances of estimators of population density, reducing sampling effort, while maintaining the property of unbiasedness. The notions of increasing window sensitivity (IWS) and decreasing window sensitivity (DWS) are introduced, and a method of deriving confidence intervals is discussed.     

超滤膜处理火电厂废水的工业性试验研究

结合现场中试探讨了超滤作为反渗透预处理工艺的可行性，确定了超滤工艺处理某火电厂废水的基本参数，研究了超滤膜的恢复及效果，并且提出了系统设计的相关建议，对工业系统设计具有指导意义。     

燃煤电厂袋式除尘器滤料耐氧化性能试验研究

燃煤电厂锅炉烟气中含有SOx和NOx,会氧化腐蚀滤料。试验研究了燃煤电厂布袋除尘器滤料断裂强力与运行时间的关系。结果表明,滤料在酸性环境中会被氧化同时断裂强力下降,但断裂强力下降后均会出现反弹,后处理工艺可提高滤料的抗氧化性能,但会降低滤料的断裂强力。     

脉冲袋式除尘器过滤风速的确定

过滤风速的选择是设计布袋除尘器的关键。本文在对工程应用中的脉冲袋式除尘器相关参数测定后,采用数学拟合法,得出了过滤风速与烟粉尘粒径的对数成正比、与废气含尘浓度和废气温度成反比的数学关系,并建立了具体的数学模型。     

Testing hypotheses about management to enhance habitat for feeding birds in a freshwater wetland

The level of water was manipulated in a freshwater wetland, with the aim of enhancing abundances of benthic animals and, ultimately, improving habitat for feeding birds (Japanese Snipe, Gallinago hardwickii). We tested whether these actions had the predicted and desired effects on benthic animals, by contrasting changes in two managed locations to one control location which was left unmanipulated. The number of taxa and abundances of chironomids decreased strongly and significantly in the manipulated locations, while the abundance of oligochaetes appeared to vary in a seasonal manner. Temporal variability of the structure and composition of assemblages was also increased in manipulated locations. Such effects have previously been suggested to indicate stress in benthic assemblages. Therefore, in contrast to what was predicted, managerial actions made benthic fauna less abundant and thus, less suitable as habitat for feeding birds. Several general lessons can be learned from these results. (1) Effects of managerial actions like these are difficult to predict a priori and can only be reliably evaluated with an experimental framework. (2) Because abundances of animals vary naturally, evaluations of managerial actions must include appropriate spatial replication. (3) Sampling at hierarchical temporal scales is important, because abundances of animals may vary in an unpredictable manner at short temporal scales and because changes in temporal variability may be a symptom of stress. (4) Combined use of uni- and multivariate techniques provides a comprehensive set of tools to assess the effects of restoration and creation of new habitats. Finally, these results emphasise the need for clear predictions about desired outcomes and specific experimental plans about how to test whether the desired results were achieved, before managerial actions are taken. Although this is often very difficult to achieve in real situations, it is necessary for practices of management to evolve on the basis of sound empirical experience.     

试论煤矿井下快速断电安全技术

论述了煤矿井下漏电保护和短路保护装置的现状和实施快速断电安全技术的必要性;介绍了煤矿快速断电安全技术的发展水平;对快速断电安全技术中的几个问题进行了探讨;提出了可行的缩短故障取样时间技术方案     

Collecting representative dust samples: A comparison of various sampling methods in underground coal mines

Former methods used in the U.S. to assess hazardous and explosible coal dust date back to the 1950s. As mining technologies advanced, so too have the hazards. Given the results of the recent coal dust particle size survey and full-scale experimental mine explosion tests, the National Institute for Occupational Safety and Health (NIOSH) recommended a new minimum standard, in the absence of background methane, of 80% total incombustible content (TIC) be required in the intake airways of bituminous coal mines, replacing the previous 65% TIC requirement. Most important to monitoring and maintaining the 80% TIC is the ability to effectively collect and analyze representative dust samples that would likely disperse and participate in dust explosion propagation. Research has shown that dust suspended on elevated surfaces is usually finer, more reactive, and more readily dispersible while floor deposits of dust are generally coarser and more difficult to disperse given the same blast of air. The roof, rib, and floor portions of the dust samples were collected and analyzed for incombustible content separately and the results were compared to a band sample of the roof, rib, and floor components. Results indicate that the roof and rib dust samples should be kept separate from floor dust samples and considered individually for analyses. The various experimental collection methods are detailed along with preferred sampling approaches that improve the detectability of potentially hazardous accumulations of explosible dust.