建设用地土壤污染状况调查监管存在的问题及对策探讨

明确了建设用地土壤污染状况调查监管的对象,分析了我国现阶段调查监管存在的监管力量不足、从业门槛不明确、实时监管措施缺乏等问题。结合国内外调查工作监管经验和近年苏州工业园区调查监管的探索实践,提出了鼓励引导相关利益方参与调查监管、建立健全从业人员和机构监管制度、引入监理机制、推进信息化过程管理等对策建议。     

企业建设项目竣工环境保护自主验收工作初探

简述了企业建设项目竣工环境保护自主验收政策的出台背景,介绍了自主验收目前取得的成效。针对现阶段工作中存在的自主验收缺乏有效监管及配套的技术支撑、企业主体责任意识不强等问题,提出了完善监督管理制度、提高企业主体责任意识、加强第三方验收监测机构管理、开展验收技术培训、规范建设项目变动认定管理等建议。     

污染影响型土壤环境影响评价过程中预测和评价方法

随着国民经济的持续发展,建设项目开发过程中可能造成土壤本身或与之相关的环境要素之间在物质、能量转移循环过程中受到不同程度的影响。以《环境影响评价技术导则土壤环境》(HJ 964-2018)为依据,对污染型土壤环境进行环境影响评价,为建设项目土壤环境保护提供科学依据。     

论钢铁企业危险废物专项管理制度建设

简要介绍钢铁企业建立并实施危险废物专项管理制度及其重要性,并结合实际对钢铁企业危险废物专项管理建设提出了建议。     

Fenton试剂氧化法在工业废水处理中的应用研究

Fenton试剂的氧化能力强,反应过程短,降解效果好,本文中介绍了Fenton试剂的特点,并且通过实验得出几种无机离子对Fenton试剂氧化处理工业废水的影响。     

生活垃圾填埋场项目竣工环保验收应注意的问题

生活垃圾填埋场建设项目竣工环境保护验收制度是环境保护工作的重要制度。垃圾填埋场项目竣工环境保护验收情况是环保部门对改项目运行后进行环境管理的主要依据。根据垃圾填埋场项目竣工环境保护验收规范要求和实际工作经验,总结出竣工项目环境保护验收中需要注意的问题,并就问题的原因分析提出注意要点。     

风力发电场施工期环境监理工作内容——以内蒙古阿拉善盟阿右旗风电场为例

本文以阿右旗风电场为例,综述了对风力发电场施工期的环境监理内容,旨在为以后的风力发电场施工期环境监理提供参考。     

公路项目施工期环评要点分析

本文首先介绍公路项目施工期环评的现实意义,之后阐述公路项目施工期环评要点,以此强化公路项目施工期环评水平及其环保效益。     

Time and cost characterisation of emissions from non-road diesel equipment for infrastructure projects

The construction process contributes to pollutant emissions, particularly through the operation of diesel- and gasoline-powered equipment. In the past decade, a series of investigations were undertaken to quantify these emissions for a variety of non-road construction equipment performing different activities and undergoing different duty cycles, and a model to estimate quantities of six types of pollutant was developed. This paper uses that model to estimate emissions for four street and utility construction projects which no one has done previously. We combined information from company records with standard construction industry manuals to estimate total emissions for the projects and to examine the pollution patterns and magnitudes. The street construction projects all had similar emission profiles with a large peak at the beginning and a steady output of emissions throughout the duration of the project. For example, in two of the projects studied, half of all CO₂ emissions were produced before the projects were 40% completed. Results showed that demolition and earthwork are the activities with the largest contribution. The equipment types with the largest contribution are backhoes, front-end loaders, bulldozers and trenchers. Trenchers, for example, produced 30% of all emissions on the projects on which they were used.     

Estimation of building-related construction and demolition waste in Shanghai

One methodology is proposed to estimate the quantification and composition of building-related construction and demolition (C&D) waste in a fast developing region like Shanghai, PR China. The varieties of structure types and building waste intensities due to the requirement of progressive building design and structure codes in different decades are considered in this regional C&D waste estimation study. It is concluded that approximately 13.71 million tons of C&D waste was generated in 2012 in Shanghai, of which more than 80% of this C&D waste was concrete, bricks and blocks. Analysis from this study can be applied to facilitate C&D waste governors and researchers the duty of formulating precise policies and specifications. As a matter of fact, at least a half of the enormous amount of C&D waste could be recycled if implementing proper recycling technologies and measures. The appropriate managements would be economically and environmentally beneficial to Shanghai where the per capita per year output of C&D waste has been as high as 842 kg in 2010.