高烈度地震区隧道软硬围岩交接段刚柔并济抗减震技术研究*

为提高高烈度地震区隧道抗震性能，以某铁路隧道为研究背景，分析3种抗减震措施下隧道不同监测点隧道拱顶沉降、边墙收敛、衬砌结构PGA及最小安全系数，通过对比分析得到最优抗减震措施。结果表明:相比于工况1，工况2隧道拱顶沉降减小10.54%~81.10%，边墙收敛减小13.92%~78.77%，衬砌结构PGA减小31.42%~72.02%，最小安全系数增加18.04%~66.13%；相比于工况1，工况3结构拱顶沉降减小3.04%~18.02%，边墙收敛减小4.70%~32.00%，PGA增加13.95%~27.48%，最小安全系数增加7.49%~30.99%；工况4即“减震层+SFRC衬砌”刚柔并济法，相比于工况1，隧道拱顶沉降减小18.46%~83.98%，结构边墙收敛减小17.54%~85.47%，PGA减小30.00%~69.98%，最小安全系数增加47.95%~83.56%；4种工况抗减震性能由高到低依次为:工况4＞工况2＞工况3＞工况1。研究结果可为隧道软硬围岩交接段抗震设防提供理论参考。     

Toward sustainable use of natural resources: Nexus between resource rents,affluence, energy intensity and carbon emissions in developing and transition economies

Sustainable use of natural resources would entail ensuring that derived economic benefits today do not undermine the welfare of generations to come. On this basis, this study examines the nexus between natural resource rents and carbon dioxide (CO₂) emissions disaggregated into production and consumption-based (i.e., trade-adjusted) CO₂ emissions for a selected panel of 45 developing and transition economies over the period 1995–2017. The empirical model also incorporates the impacts of population, affluence, and energy intensity. The results show that affluence increases production-based CO₂ emissions by 1.407%, with the EKC's predicted inverted U-shaped curve only explaining consumption-based CO₂ emissions. Economic reliance on natural resource rents and energy intensification contribute 0.022% and 0.766%, respectively, to CO₂ emissions embedded in territorial production inventories and 0.035% and 0.583%, respectively, to CO₂ emissions embedded in consumption inventories. The bootstrap non-causality test shows that historical data on each variable has significant predictive power for future CO₂ emissions from both sources. The historical information about natural resource rents has significant predictive power over the future levels of affluence and energy intensity. Clearly, the results show that the environmental impact of natural resource rents is stronger when CO₂ emissions are adjusted for trade and varies among the countries, with Bangladesh, Guinea, India, Malaysia, Mexico, Nigeria, Pakistan, Saudi Arabia, Vietnam, and Zimbabwe among the most affected countries. Overall, this study provides motivation for policies to keep the use of natural resources within sustainable limits.     

Safety-related conclusions for the application of ultrasound in explosive atmospheres

International safety regulations such as EN 1127-1 consider ultrasound to be an ignition source. Currently, applications of ultrasound in explosive atmospheres have to comply with a threshold value of 1 mW/mm². However, it is unclear as to how this intensity has to be measured and, therefore, this threshold value is poorly defined. Moreover, it is based on theoretical estimations in analogy to other ignition sources and there are no publications or significant records on these estimations. Within a research project at PTB, it has now been investigated experimentally in relation to worst-case considerations including airborne ultrasound, focused MHz ultrasound in liquids and acoustic cavitation. On the basis of the results of the research it is now possible to revise the current regulations and to specify measures for safe operation of ultrasonic applications in explosive atmospheres. In this context, for ultrasound coupled directly to gaseous atmospheres a new threshold value of 170 dB (re. 20 μPa) can be suggested, and for ultrasonic applications in liquids, an augmentation can be made to the threshold to 400 mW/mm².     

E-bikers’ braking behavior: Results from a naturalistic cycling study

Abstract

Objective: The number of e-bike users has increased significantly over the past few years and with it the associated safety concerns. Because e-bikes are faster than conventional bicycles and more prone to be in conflict with road users, e-bikers may need to perform avoidance maneuvers more frequently. Braking is the most common avoidance maneuver but is also a complex and critical task in emergency situations, because cyclists must reduce speed quickly without losing balance. The aim of this study is to understand the braking strategies of e-bikers in real-world traffic environments and to assess their road safety implications. This article investigates (1) how cyclists on e-bikes use front and rear brakes during routine cycling and (2) whether this behavior changes during unexpected conflicts with other road users.

Methods: Naturalistic data were collected from 6 regular bicycle riders who each rode e-bikes during a period of 2 weeks, for a total of 32.5?h of data. Braking events were identified and characterized through a combined analysis of brake pressure at each wheel, velocity, and longitudinal acceleration. Furthermore, the braking patterns obtained during unexpected events were compared with braking patterns during routine cycling.

Results: In the majority of braking events during routine cycling, cyclists used only one brake at a time, favoring one of the 2 brakes according to a personal pre-established pattern. However, the favored brake varied among cyclists: 66% favored the rear brake and 16% the front brake. Only 16% of the cyclists showed no clear preference, variously using rear brake, front brake, or combined braking (both brakes at the same time), suggesting that the selection of which brake to use depended on the characteristics of the specific scenario experienced by the cyclist rather than on a personal preference. In unexpected conflicts, generally requiring a larger deceleration, combined braking became more prevalent for most of the cyclists; still, when combined braking was not applied, cyclists continued to use the favored brake of routine cycling. Kinematic analysis revealed that, when larger decelerations were required, cyclists more frequently used combined braking instead of single braking.

Conclusions: The results provide new insights into the behavior of cyclists on e-bikes and may provide support in the development of safety measures including guidelines and best practices for optimal brake use. The results may also inform the design of braking systems intended to reduce the complexity of the braking operation.     

壳体缓释技术对带壳装药慢速烤燃反应烈度的缓解作用研究*

为了研究2种典型壳体缓释技术对弹药慢速烤燃响应烈度的缓解作用,基于试验条件分别建立无缓释设计、侧壁加工应力槽和端盖加工泄压孔的带壳PBX装药慢速烤燃仿真模型,提出使用热分解反应动力学模型和燃烧反应模型模拟计算不同约束条件下带壳PBX装药从开始加热发生热分解反应到点火燃烧以及炸药与壳体耦合作用的烤燃过程的计算方法。研究结果表明:通过侧壁加工应力槽以及端盖加工泄压孔的缓释结构设计,可以有效地降低壳体破裂时炸药内部的压力及反应度,以达到缓解反应烈度的目的。     

公路项目环评中低时速单车噪声源强研究

由于缺乏低时速单车噪声源强估算模式,低等级公路项目噪声预测结果常与实际监测结果存在较大偏差。文中通过实测各车型车辆在低时速条件下时速和单车辐射声级(Lmax)数据,运用统计软件分析两者间的关系,并通过实测过往车辆数据进行验证。结果显示沿用《公路建设项目环境影响评价规范》(以下简称《06规范》)中的公式计算低车速源强可能会造成结果偏低,建议采用下列式子估算低车速单车噪声源强:小型车L=21.5 lgV+34.96(15≤V≤63),中型车L=10.4 lgV+59.29(15≤V≤53),大型车15≤V≤48(15≤V≤48)。     

1990年以来长江三角洲耕地资源变化及驱动因子研究

长江三角洲地区是中国经济发展最为快速的地区之一,虽耕地资源秉赋较好,但在经济快速发展的背景下,耕地问题显得十分严峻。以长江三角洲地区16个地级市为研究对象,利用1990~2012年相关数据,以市域为单元分析了耕地资源变化和实际利用强度的时空演变过程。结果表明:(1)1990~2012年,长三角地区的耕地总面积和人均耕地面积呈现周期性的下降趋势,以"快-慢-快-慢-慢"的循环模式逐步降低;(2)长三角地区耕地实际利用强度大体呈现"北强南弱"分布规律,在空间表现上,原来集中连片的 "高-高"、"低-低"格局正逐渐破碎化,开始出现斑点镶嵌式格局;(3)长三角地区的人口、二三产业比重和城市化水平均对耕地面积变化起到显著作用,其弹性系数分别为-0.216、-0.194和-0.203,而人均GDP与耕地面积则没有显著相关性。     

需求视角的中国能源消费氮氧化物排放研究

基于经济投入产出生命周期评价(EIO-LCA)模型构建了中国1990—2010年能源消费氮氧化物完全排放矩阵,从需求的角度分析了氮氧化物排放在部门和不同需求间的分布结构,并通过情景模拟深入探讨了最终需求结构变化对氮氧化物排放的综合影响和拉动效应,以期探索中国氮氧化物减排的多元化途径.研究结果显示,1990—2010年中国氮氧化物排放总量从878万t上升到2398万t,历年来由工业部门拉动产生的氮氧化物占总量的比重高达70%左右;由最终消费拉动的氮氧化物排放比重逐年下降,资本形成和出口拉动的氮氧化物排放比重逐年上升.氮氧化物排放强度则从47.0 kg·万元-1降至6.0 kg·万元-1,其中,能源和交通部门的排放强度最高.通过情景模拟可以看出,提高最终消费比重,扩大内需有利于氮氧化物总量减排,尤其是对工业部门的减排效果显著.实现氮氧化物总量减排目标,要求在技术进步之外,积极寻求多元减排措施,以强化减排效果,突出能源和交通等重点部门的氮氧化物防治体系建设,并通过扩大内需优化最终需求结构以促进工业部门氮氧化物减排.     

基于标准化降水蒸散指数的陕西省近50 a干旱特征分析

基于陕西省18 个气象站点1961-2010 年实测气象资料,利用标准化降水蒸散指数(SPEI),通过计算各站历年逐月的SPEI 指数值,统计近50 a 各站点出现的干旱过程,分析了陕西省历年、历年各季及月尺度上的干旱发生频率、覆盖面积和干旱发生强度,揭示了陕西省干旱发生的时空和强度演变特征。研究结果表明,近50 a 来陕西省干旱发生频率呈明显的增长趋势,尤其是1990 年以来的近20 a;陕西省在年、春、夏、秋、冬及月尺度上均有干旱发生。其中,秋季干旱最为严重,春季次之。在年代际变化方面,全省以20 世纪90 年代干旱最为严重,2000 年以来的干旱次之;干旱出现既有全省性的大范围干旱,也有区域性的局部干旱,分布极不均匀,总体分布特征是北多南少;干旱发生强度分布呈现出关中最强、陕南次之、陕北最弱的特点。     

恶臭污染评价方法及来源识别研究

随着经济的发展,人们的环境意识不断增强,恶臭作为一种环境污染已越来越受到人们的重视.文章概述了恶臭评价的主要影响因素,以及目前常用的评价方法如臭气强度评价法、臭气浓度(或臭气指数)评价法、臭气扩散模型预测评价法,同时从谱图恶臭污染源识别和源解析模型识别技术两方面介绍了恶臭污染物源解析技术,为恶臭污染事故诊断分析、定性恶臭污染物来源提供了一种新的途径和方法.最后通过分析目前尚未解决的科学问题,指出了今后的研究方向.