A 1-dodecanethiol-based phase transfer protocol for the highly efficient extraction of noble metal ions from aqueous phase

A 1-dodecanethiol-based phase-transfer protocol is developed for the extraction of noble metal ions from aqueous solution to a hydrocarbon phase, which calls for first mixing the aqueous metal ion solution with an ethanolic solution of 1-dodecanethiol, and then extracting the coordination compounds formed between noble metal ions and 1-dodecanethiol into a non-polar organic solvent. A number of characterization techniques, including inductively coupled plasma atomic emission spectroscopy, Fourier transform infrared spectroscopy, and thermogravimetric analysis demonstrate that this protocol could be applied to extract a wide variety of noble metal ions from water to dichloromethane with an efficiency of >96%, and has high selectivity for the separation of the noble metal ions from other transition metals. It is therefore an attractive alternative for the extraction of noble metals from water, soil, or waste printed circuit boards.     

Efficient removal of naphthalene-2-ol from aqueous solutions by solvent extraction

Naphthalene-2-ol is a typical biologically recalcitrant pollutant in dye wastewater.Solvent extraction of naphthalene-2-ol from aqueous solutions using mixed solvents was investigated.Various extractants and diluents were evaluated,and the effects of volume ratio of extractant to diluent,initial p H,initial concentration of naphthalene-2-ol in aqueous solution,extraction time,temperature,volume ratio of organic phase to aqueous phase(O/A),stirring rate and extraction stages,on extraction efficiency were examined separately.Regeneration and reuse of the spent extractant were also investigated.Results showed that tributyl phosphate(TBP) achieved 98% extraction efficiency for naphthalene-2-ol in a single stage extraction,the highest among the 12 extractants evaluated.Extraction efficiency was optimized when cyclohexane and n-octane were used as diluents.The solvent combination of 20% TBP,20% n-octanol and 60% cyclohexane(V/V) obtained the maximum extraction efficiency for naphthalene-2-ol,99.3%,within 20 min using three cross-current extraction stages under the following extraction conditions:O/A ratio of 1:1,initial p H of 3,25°C and stirring rate of 150 r/min.Recovery of mixed solvents was achieved by using 15%(W/W) Na OH solution at an O:A ratio of 1:1 and a contact time of 15 min.The mixed solvents achieved an extraction capacity for naphthalene-2-ol stably higher than90% during five cycles after regeneration.     

超临界态二氧化碳再生活性炭法治理甲苯废气

制鞋业产生的含甲苯，苯和二甲苯废气的治理大多采用活性炭吸附法。该课题提出以压缩二经碳为脱剂，采用超临界流本萃取技术再生活性炭及回收苛形式工节。     

气相色谱法测定饮水中1,2,3-三氯苯的方法研究

建立了液液萃取-气相色谱法测定饮用水1,2,3-三氯苯的方法。根据测定研究,得出其方法检出限为0.05ug/L,建立的曲线回归系数高于0.995,回收率在91.17%-106.25%之间,符合要求。     

PERCOLATION OF LEAD(II) AND CADMIUM(II) THROUGH TWO BENTONITES USED AS LANDFILL LINER

In order to prevent contamination of subsoil and groundwater by leachates containing heavy metals, montmorillonite linings are used on landfill bottoms. It is therefore important to understand ion uptake by this clay. In this study we have performed percolation of lead(II) and cadmium(II) through columns filled firstly with a technical bentonite and then with a reference bentonite. Elution curves provide an evaluation of metals retention. After the percolation step, columns are cut and metal ions are extracted to evaluate influence of side effects and soil depth on metal uptake. Moreover retentions of lead(II) and cadmium(II) are compared.     

Fractionation of Cd,Cr, Pb and Ni in roadside soils of Uyo,Niger Delta Region: Nigeria using the optimized BCR sequential extraction technique

The optimized BCR sequential extraction procedure was applied to nine roadside soil samples for the determination of Cd, Cr, Pb and Ni. The extractable metals were isolated into three operationally defined fractions viz: acid extractable, reducible and oxidizable. The residue was treated with aqua regia solution. Metal analysis was done using flame atomic absorption spectrophotometry with air–acetylene flame. Results obtained showed the concentrations of the metals as relative abundance in the mobile phases of the samples (based on the sum of the first three fractions) are in the following order: Cd(91.9) > Pb(82.8) > Ni(49.5) > Cr(39.0). The most non-mobilizable metals were Cr and Ni which are generally lithogenic, associated with the silicate matrix, and the order is as follows: Cr(61.0) > Ni(50.5) > Pb(17.2) > Cd(8.1). The recovery of all the metals expressed as the ratio of total metal concentration to fractional sum of the optimized BCR sequential extraction procedure was of the order: Cr(95.6) > Pb(95.0) > Ni(94.8) > Cd(92.4).     

Evaluation of the optimal washing conditions for dioxin-contaminated soils from the circumference of an incinerator

 The optimal soil-washing conditions for dioxins were estimated on a soil sample from the circumference of an incinerator in Nose City, Osaka, Japan. The solvents ethanol, methanol, and acetone, together with a surfactant (100% of each) could extract 40% of the dioxins from contaminated soil at room temperature. From among these solvents, ethanol was chosen for a study on how to optimize the extraction conditions because of its low toxicity and its economic advantages. The time-course of the agitation showed that the extraction rate increased for 1 min, and thereafter the rate decreased. Therefore, the agitation time was fixed at 1 min. To estimate the effect of temperature on the extraction rate, the extraction temperature was changed. The amount of dioxins extracted was largest at the boiling point of ethanol (78.3°C), giving about 76% extraction. Furthermore, at this temperature, almost 100% of the dioxins in the contaminated soil were extracted when the ratio of water to ethanol was 20%. Received: March 6, 2002 / Accepted: September 9, 2002     

萃取法由废催化剂制取钼酸铵

用季胺盐作萃取剂，采用一级萃取回收废催化剂中的钼，其钼回收率可达９０％，反萃液可直接得到四钼酸铵，工艺简单，操作方便，具有显著的经济效益和一定的环境效益。     

Genotoxicity of substances extracted from construction materials

Construction waste such as road pavement and concrete is estimated to constitute about 50% of the total industrial waste in Japan, and the recycling of such material has recently become a prominent topic among construction engineers. It has also been suggested that various types of industrial waste be utilized as components of construction materials. This paper investigates the environmental safety of certain materials in terms of the elutions and genotoxicities of these substances. The substances extracted from some materials, such as emulsifier, ash, and sediment, were found to have genotoxic characteristics. The dose-related responses of the various materials and their genotoxic strengths are shown. Received: June 16, 1998 / Accepted: September 7, 1999     

萃取富集—火焰原子吸收法测定环境水中痕量砷

联合应用高效雾化器、缝式石英管火焰原子吸收法，采用萃取富集技术测定砷，使砷的灵敏度改善267倍，同时消除了大量盐类的干扰，避免了钠、铝等对石英管的损坏。考察了溶液酸度、碘化钾用量、共存离子等因素对实验的影响。该方法的线性范围为0～25μg／L，检出限为。3μg／L，相对标准偏差为3．2％，回收率为97．8％～101．0％，用于环境水样中痕量砷的监测，结果令人满意。