Emerging applications of green coconut: A promising lignocellulosic biomass

Waste accumulation is a grave concern and becoming a transboundary challenge for environment. During Covid-19 pandemic, diverse type of waste were collected due to different practices employed in order to fight back the transmission rate of the virus. Covid-19 was proved to be capricious catastrophe of this 20th century and even not completely eradicated from the world. The havoc created by this imperceptible quick witted, pleomorphic deadly virus can't be ignored. Though a number of vaccines have been developed by the scientists but there is a fear of getting this virus again in our life. Medical studies prove that immunity drinks will help to reduce its reoccurrences. Coconut water is widely used among all drinks available globally. Its massive consumption created an incalculable pile of green coconut shells around the different corners of the world. This practice generating enormous problem of space acquisition for the environment. Both the environment and public health will benefit from an evaluation of quantity of coconut waste that is being thrown and its potential to generate value added products. With this context, present article has been planned to study different aspects like, coconut waste generation, its biological properties and environmental hazards associated with its accumulation. Additionally, this review illustrates, green technologies for production of different value added products from coconut waste.     

Racemic,R-, and S-tebuconazole altered chitinase and chitobiase activity of Daphnia magna

Tebuconazole is a chiral trizole fungicide and widely used in many crops for controlling disease. Tebuconazole is potential toxic to some aquatic organisms but relative information of its isomers is scarce. To detect the endocrine disrupting effects and difference of rac-, R-, and S-tebuconazole, the chitinase activity in Daphnia magna and chitobiase activity in each test medium were used as biomonitors after a 14-day exposure. Results showed that chitinase activity was significantly reduced by rac-, R-, and S-tebuconazole. The chitobiase activity in the test medium was reduced by rac- and R-tebuconazole before day 10, and only one peak was observed at day 10 or day 12 compared with two obvious peaks in the control group (days 6 and 12). S-tebuconazole delayed and reduced the reproduction of D. magna, but did not delay the first chitobiase activity peak, whereas the second peak could not be characterized as the exposure concentration and time increased. Compared with chitinase activity, chitobiase activity can still be used as a rudimentary model for identifying molt-interfering xenobiotics, and further studies should focus on the analysis of correlations between these parameters.     

基于高通量分析方法的长江干流重庆段抗生素种类特征及来源初探

采用高通量分析方法对长江干流重庆段11个流域断面、2个市政污水处理厂进水和6个养殖场废水的潜在抗生素进行筛查,并结合抗生素使用调查探讨其来源。结果表明,(1)共检出83种抗生素,其中流域内检出36种,污水处理厂和养殖场废水中检出70种;磺胺间甲氧嘧啶检出率最高,在流域水体和废水的检出率分别为91%和55%,喹诺酮类是检出抗生素的主要类型;(2)长江干流重庆段下游检出抗生素数量高于上游检出抗生素;(3)有20种抗生素可能由上游携带和重庆市内排放2种方式进入流域,7种抗生素可能由上游携带入境,9种抗生素可能由重庆市内排放引入长江。     

分子识别作用下光催化降解偶氮染料酸性红GR

合成了β-环糊精(β-CD)与偶氮染料酸性红GR(ARGR)的包结物,并采用红外光谱仪对ARGR、β-CD及β-CD与ARGR的包结物进行了表征,表征结果显示,β-CD与ARGR的包结物的特征峰的峰形和强度与β-CD相似,但峰位有明显的偏移,说明ARGR进入了β-CD空腔与β-CD发生了分子识别作用。采用TiO2作为催化剂,研究了β-CD分子识别后ARGR的光催化降解行为,实验结果表明,在ARGR质量浓度为20.0 mg/L、β-CD浓度为1.8×10-5 mol/L、体系pH为4.0、TiO2加入量为1.0 g/L、光催化反应时间为60 min的条件下,经β-CD分子识别后ARGR的光催化降解率可达100%。     

电路板的高加速应力筛选仿真设计技术研究

针对某型电路板高加速应力筛选剖面设计中耗费大量人力物力的实际情况,结合目前计算机辅助及仿真技术所具有的成本低、周期短、精度高等特点,将高加速应力筛选及计算机仿真技术融合,提出了运用计算机仿真手段来研究产品的高加速应力筛选剖面的方法及基本思路。对剩余有效寿命的预计、缺陷影响以及应力影响等方面进行了研究分析。从而在高加速应力筛选剖面设计信息量的扩充、成本的节省、周期的缩短等方面起到了一定的促进作用。     

中国大气中重金属钒的排放特征

化石燃料原油和原煤的燃烧、含钒矿石的开采和冶炼是大气中重金属钒的主要来源。文章利用重金属钒的排放系数分析了中国1978-2010年人为过程释放到大气中重金属钒的总量和行业重金属钒的排放,预测了2020年和2030年中国大气中重金属钒的排放量。结果表明,自1978年以来,中国钒的排放量增加了4倍,中国2010年人类活动向大气排放的重金属钒总量达3.18万吨,约占世界总量的12%。原油燃烧释放到大气中的钒约占总量的85%,煤炭燃烧的排放量占10.5%,其中工业耗油向大气中释放重金属钒的比例从1980的71%下降到2008年的42%,总量从3 721 t增加至9 361 t;交通运输行业从10%上升到36%,总量从547 t增加至7 967 t;其它行业(农林牧渔水利业、批发零售业和住宿餐饮业、生活消费)基本维持在20%左右,总量从986 t增加至5 052 t。因此,应加强大气中钒的监测和管理,预防大气钒污染事件的发生。     

环氧化PVA载体固定漆酶的最佳工艺条件研究

在T=35℃,HAc-NaAc缓冲溶液pH为4的条件下,用环氧化PVA载体对漆酶进行固定化,固定后酶活为游离酶活的95%。用该固定化漆酶处理制浆造纸废水,反复使用6次后,酶活仍保持为初始酶活的45%,且每次COD去除率在40%以上,处理后的废水BOD增大了50%,废水可生化性得到很大提高。     

厌氧/好氧交替快速筛选聚磷菌及其生理特性的研究

通过厌氧/好氧交替的平板筛选方法,快速的筛选出除磷率高于60%的高效聚磷菌15株,并对其进行16S rDNA和生理生化测定,除2株为芽孢杆菌外,其余均为γ变形菌纲,主要以Klebsiella sp.和Pseudomonas sp.为主.菌种除磷实验表明,聚磷菌除磷能力越高,发酵终点pH值越高.聚磷菌反投加实验表明,与活性污泥52%的除磷率相比,投加后除磷率可达到73.3%,可以有效提高活性污泥的除磷能力.     

离子液体1-丁基-3-甲基咪唑氯盐对斜生栅藻的毒性效应

按照毒性试验标准方法研究了不同浓度离子液体1-丁基-3-甲基咪唑氯盐([BMIM]Cl)对斜生栅藻的影响,测定了半数抑制浓度(IC50)、叶绿素含量、超氧化物歧化酶(SOD)活性、过氧化氢酶(CAT)活性以及藻细胞通透性的变化,观察了80mg/L[BMIM]Cl处理96h对藻细胞的影响.结果表明:[BMIM]Cl对斜生栅藻生长具有抑制作用,随着浓度的增大抑制率增加,叶绿素含量下降, 48h IC50、72h IC50和96h IC50分别为103.77、76.44和68.49mg/L.藻细胞对[BMIM]Cl有一定的氧化应激反应,CAT和SOD活性随[BMIM]Cl浓度升高而降低.[BMIM]Cl对藻细胞的细胞膜有一定程度的破坏作用,藻细胞通透性随浓度升高而增大,同时藻细胞的超微结构受到了[BMIM]Cl的影响,造成质壁分离,叶绿体片层断裂,线粒体嵴数量减少.     

高效木薯渣分解复合菌群RXS的构建及其发酵特性研究

从富含腐烂纤维质的环境中取样,通过以木薯渣及滤纸为碳源的蛋白胨纤维素培养基不断地富集培养,构建了一组高效稳定的纤维质分解复合菌群.考察了该复合菌群对不同纤维质底物的分解性能及其在木薯渣水解过程中主要参数的变化.研究发现该复合菌群对滤纸、脱脂棉、微晶纤维素、麦秸秆和木薯渣等原料均能够进行有效的降解.在该复合菌群应用于木薯渣的水解过程中,监测发现纤维素酶、半纤维素酶、果胶酶等关键酶的酶活力分别在第2～3 d达到最大值34.4、90.5和15.8U;经过10 d的发酵后,木薯渣中的纤维素、半纤维素及木质素分别降解了79.8%、85.9%和19.4%,且木薯渣的失重高达61.5%;此外,代谢产物主要是乙酸、丁酸、己酸和甘油;而溶解性COD、总糖和总挥发酸的变化表明第2 d时木薯渣的水解率最高.上述结果表明,该复合菌群能够有效地水解木薯燃料酒精生产过程中的废弃物木薯渣,并有望用于木薯渣高效沼气发酵的前处理中.