Treating wastewater under zero waste principle using wetland mesocosms

• Smart wetland was designed to treat wastewater according to zero waste principle. • The system included a dynamic roughing filter, Cyperus papyrus (L.) and zeolite. • It removed 98.8 and 99.8% of chemical and bacterial pollutants in 3 days. • The effluent reused to irrigate a landscape and the sludge recycled as fertilizer. • The plant biomass is a profitable resource for antibacterial and antioxidants. The present investigation demonstrates the synergistic action of using a sedimentation unit together with Cyperus papyrus (L.) wetland enriched with zeolite mineral in one-year round experiment for treating wastewater. The system was designed to support a horizontal surface flow pattern and showed satisfactory removal efficiencies for both physicochemical and bacteriological contaminants within 3 days of residence time. The removal efficiencies ranged between 76.3% and 98.8% for total suspended solids, turbidity, iron, biological oxygen demand, and ammonia. The bacterial indicators (total and fecal coliforms, as well as fecal streptococci) and the potential pathogens (Escherichia coli, Staphylococcus aureus, and Pseudomonas aeruginosa) showed removal efficiencies ranged between 96.9% and 99.8%. We expect the system to offer a smart management for every component according to zero waste principle. The treated effluent was reused to irrigate the landscape of pilot area, and the excess sludge was recycled as fertilizer and soil conditioner. The zeolite mineral did not require regeneration for almost 36 weeks of operation, and enhanced the density of shoots (14.11%) and the height of shoots (15.88%). The harvested plant biomass could be a profitable resource for potent antibacterial and antioxidant bioactive compounds. This could certainly offset part of the operation and maintenance costs and optimize the system implementation feasibility. Although the experiment was designed under local conditions, its results could provide insights to upgrade and optimize the performance of other analogous large-scale constructed wetlands.     

Influence of pore structure on biologically activated carbon performance and biofilm microbial characteristics

• Pore structure affects biologically activated carbon performance. • Pore structure determines organic matter (OM) removal mechanism. • Microbial community structure is related to pore structure and OM removal. Optimizing the characteristics of granular activated carbon (GAC) can improve the performance of biologically activated carbon (BAC) filters, and iodine value has always been the principal index for GAC selection. However, in this study, among three types of GAC treating the same humic acid-contaminated water, one had an iodine value 35% lower than the other two, but the dissolved organic carbon removal efficiency of its BAC was less than 5% away from the others. Iodine value was found to influence the removal of different organic fractions instead of the total removal efficiency. Based on the removal and biological characteristics, two possible mechanisms of organic matter removal during steady-state were suggested. For GAC with poor micropore volume and iodine value, high molecular weight substances (3500–9000 Da) were removed mainly through degradation by microorganisms, and the biodegraded organics (soluble microbial by-products,<3500 Da) were released because of the low adsorption capacity of activated carbon. For GAC with higher micropore volume and iodine value, organics with low molecular weight (<3500 Da) were more easily removed, first being adsorbed by micropores and then biodegraded by the biofilm. The biomass was determined by the pore volume with pore diameters greater than 100 μm, but did not correspond to the removal efficiency. Nevertheless, the microbial community structure was coordinate with both the pore structure and the organic removal characteristics. The findings provide a theoretical basis for selecting GAC for the BAC process based on its pore structure.     

不同喷雾方式下低阻文丘里振弦栅除尘配置优化实验研究

为了对比径向外喷和轴向喷雾下的低阻文丘里振弦栅耦合除尘效果，以除尘效率和系统阻力为参照，选定喉管气速、振弦栅数、纤维丝间隙和喉管液气比进行单因素实验。结果表明2种喷雾方式的除尘效率和系统阻力的变化趋势相同。利用SPSS软件进行4因素3水平正交实验设计，在特定参数条件下，2种喷雾方式的因素影响排序相同，除尘效率为纤维栅数＞纤维丝间隙＞喉管气速＞喷雾量；系统阻力为喉管气速＞纤维栅数＞纤维丝间隙＞喷雾量；径向外喷最佳配置为喉管气速24 m/s、喷雾量2.3 L/min、2块间隙为0.8 mm纤维栅板；轴向喷雾为喉管气速28 m/s、喷雾量2.4 L/min、2块间隙为0.8 mm纤维栅板；在最优配置下的除尘性能为径向外喷＞轴向喷雾。     

提高GPS定位精度的群调度滤波算法*

为解决现行安全生产科技领域中全球定位系统（GPS）/惯性导航系统（INS）融合系统容易产生较大时变误差的关键问题，满足GPS定位信号的精度和信号数据处理时间的要求，提出1种群调度滤波算法，通过实验仿真，分别与模糊算法、机器学习算法及卡尔曼滤波网络算法进行比较研究。结果表明:群调度滤波算法兼顾了定位精度与数据处理时间，具有较大优势，可在航空安全、船舶安全、应急监测、灾后抢险等安全科技领域广泛应用。     

MnOx/ACF负载型催化剂常温催化氧化二氯甲烷

采用浸渍法在活性碳纤维（ACF）上负载MnO_x制备了MnO_x/ACF催化剂,考察了将其用于常温催化氧化二氯甲烷的活性和稳定性。实验结果表明,MnO_x负载量（质量分数）为9%的9%MnO_x/ACF催化剂活性最高,在反应温度为25 ℃、二氯甲烷质量浓度为600 mg/m³时,反应90 min后9%MnO_x/ACF催化剂对二氯甲烷的去除率达71%。9%MnO_x/ACF催化剂重复使用5次后对二氯甲烷的去除率仍可达57%,具有较好的重复使用性能。催化剂表面的主要元素为C、O和Mn,且Mn主要以Mn⁴⁺形式存在。使用后的催化剂中存在二氯甲烷降解的中间产物甲酸盐和甲氧基物种,说明二氯甲烷已被成功降解。     

电袋复合除尘器设计若干问题的探讨

介绍了电袋复合除尘器设计过程中烟气量的核实方法、电区与袋区分级效率的确定原则、电区与袋区主要技术参数的确定方法、滤料选取、气流分布要求等内容，对电袋复合除尘器的选择与设计具有一定的参考作用。     

我国腈纶废水物化预处理方法的研究进展

结合我国腈纶废水的特征,系统归纳了近年来我国腈纶废水常用物化预处理方法的研究进展。物化预处理方法包括内电解法、混凝法、Fenton氧化法、电解法、臭氧氧化法、光催化氧化法、微波法等。这些方法普遍存在高成本、高能耗、实际运行费用大等问题。对未来物化预处理方法的研究方向提出了建议。最后指出,腈纶废水的处理应朝着节能高效和资源化的方向发展,推动我国腈纶废水处理技术的不断进步和完善。     

Charging behavior of glass beads using a spiral air type tribocharging apparatus that utilizes a Faraday cup

This paper introduces a novel tribocharging apparatus that utilizes a Faraday cup and experimentally investigates the charging behavior of glass beads. The novel apparatus mainly consists of four parts: an air supply part to control air duration and pressure, a powder supply part for setting the desired amount of powder (1 g in this experiment), a metal pipeline for generating a tribocharge, and a cyclone for collecting the powder that has passed through the pipeline. Four different sizes of spherical glass beads were used in this experiment. As for the results, the charge clearly increased as the glass bead particles passed through the pipeline for all four types of glass beads. The charge amount of the glass beads and the charge amount obtained from the pipeline had a very similar trend and absolute values. This confirmed the reliability of the test and showed that there was no disturbance due to external noise. In all of the tests, the net charge was observed to be negative for all glass beads. This agrees with the triboelectric series relating to the work functions of metals and glass particles. Smaller particles had larger charge amounts than did larger ones with good reproducibility. The charge amount of all glass beads increased as the supplied spiral air pressure increased.     

超滤技术的应用和发展研究

本文介绍了超滤技术的相关知识,在水处理、食品工业、染料工业的应用。最后探讨了超滤技术的发展趋势。     

高中速过滤器的选择

介绍了高中速过滤器的应用环境、工作原理和结构组成,并从结构组成及工艺环境和实际应用性价比方面,提出实际工作时选择高中速过滤器的注意事项。