Charging behavior of glass beads using a spiral air type tribocharging apparatus that utilizes a Faraday cup

This paper introduces a novel tribocharging apparatus that utilizes a Faraday cup and experimentally investigates the charging behavior of glass beads. The novel apparatus mainly consists of four parts: an air supply part to control air duration and pressure, a powder supply part for setting the desired amount of powder (1 g in this experiment), a metal pipeline for generating a tribocharge, and a cyclone for collecting the powder that has passed through the pipeline. Four different sizes of spherical glass beads were used in this experiment. As for the results, the charge clearly increased as the glass bead particles passed through the pipeline for all four types of glass beads. The charge amount of the glass beads and the charge amount obtained from the pipeline had a very similar trend and absolute values. This confirmed the reliability of the test and showed that there was no disturbance due to external noise. In all of the tests, the net charge was observed to be negative for all glass beads. This agrees with the triboelectric series relating to the work functions of metals and glass particles. Smaller particles had larger charge amounts than did larger ones with good reproducibility. The charge amount of all glass beads increased as the supplied spiral air pressure increased.     

General vs. domain specific recycling behaviour—Applying a multilevel comprehensive action determination model to recycling in Norwegian student homes

This paper reports the results of a multilevel structure equation model predicting general and fraction specific self-reported recycling behaviour. The model was tested on a sample of 697 undergraduate students from four Norwegian universities who each reported their degree of participation in the local recycling schemes for paper/cardboard, glass, metal, and plastic. It was demonstrated that variance in recycling behaviour can be divided into a smaller general part that is relatively stable across waste fractions and a specific part that depends on the respective fraction. General recycling behaviour is well predicted by intentions to recycle and recycling habits, whereas perceived behavioural control is to a large extend fraction specific and influences the fraction specific recycling. Perceived behavioural control mediates the influence of the recycling scheme type, distance to recycling containers, and transport mode used to reach the recycling containers.     

Effect of Recycling on Material Properties of Glass-filled Polyethylene Terephthalate

Recycled plastics are considered low performance materials because their properties are expected to decrease drastically with recycling. The objective of this study was to characterize a 15 wt.% glass filled polyethylene terephthalate (rPET-15GF) using six recycle generations and four recycle ratios. Mechanical properties such as tensile strength, elastic modulus, and percent elongation to failure of the PET composite were determined for various recycle generations and recycle ratios. Results show that the mechanical properties of rPET-15GF decrease slightly per recycle generation. In contrast, thermal properties of rPET-15GF were not at all affected by the recycling process. This data demonstrates that recycled glass filled PET can be used effectively to fabricate components without significantly affecting their mechanical performance.     

玻璃生产企业废水综合利用的可行性探讨

本文分析了玻璃生产企业废水的来源,并从耀华玻璃集团实施的废水治理项目的实际出发,阐述了废水经过治理后综合利用的途径,实现废水的零排放,减少环境污染,节约水资源。     

Utilization of calcite and waste glass for preparing construction materials with a low environmental load

In this study, porous calcite materials are hydrothermally treated at 200 °C using powder compacts consisting of calcite and glasses composed of silica-rich soda-lime. After treatment, the glasses are converted into calcium aluminosilicate hydrates, such as zeolite phases, which increase their strength. The porosity and morphology of new deposits of hydrothermally solidified materials depend up on the chemical composition of glass. The use of calcite and glass in the hydrothermal treatment plays an important role in the solidification of calcite without thermal decomposition.     

Glass buildings on river banks as “polarized light traps” for mass-swarming polarotactic caddis flies

The caddis flies Hydropsyche pellucidula emerge at dusk from the river Danube and swarm around trees and bushes on the river bank. We document here that these aquatic insects can also be attracted en masse to the vertical glass surfaces of buildings on the river bank. The individuals lured to dark, vertical glass panes land, copulate, and remain on the glass for hours. Many of them are trapped by the partly open, tiltable windows. In laboratory choice experiments, we showed that ovipositing H. pellucidula are attracted to highly and horizontally polarized light stimulating their ventral eye region and, thus, have positive polarotaxis. In the field, we documented that highly polarizing vertical black glass surfaces are significantly more attractive to both female and male H. pellucidula than weakly polarizing white ones. Using video polarimetry, we measured the reflection-polarization characteristics of vertical glass surfaces of buildings where caddis flies swarmed. We propose that after its emergence from the river, H. pellucidula is attracted to buildings by their dark silhouettes and the glass-reflected, horizontally polarized light. After sunset, this attraction may be strengthened by positive phototaxis elicited by the buildings' lights. The novelty of this visual-ecological phenomenon is that the attraction of caddis flies to vertical glass surfaces has not been expected because vertical glass panes do not resemble the horizontal surface of waters from which these insects emerge and to which they must return to oviposit.     

显像管玻壳铅尘污染特性的研究

以石家庄市显像管玻壳厂排放的铅尘为研究对象，通过在该玻壳厂周围土壤布点采样，较系统地研究了铅尘在大气和周围土壤中的迁移和转化规律，研究表明，用高斯模式能成功地预测铅尘在大气中的迁移扩散规律，玻壳厂周围土壤表层铅含量较大值出现在当地年主导风向（SSE，N）下风向，铅在土壤中的分布主要集中在0－20cm的耕作层，在20－40cm深度范围内，铅含量呈下降趋势，最大降幅达50％。     

Waste form corrosion modeling: comparison with experimental results

Results of leaching experiments using active and inactively simulated HLW glass in concentrated NaCl solution are described. Measured solution concentrations of glass components, fission products and actinides are compared with computed data. The computed pH value corresponds with the findings from experiments with inactively simulated glass samples. Moreover, the concentrations of silica and strontium can be described adequately by reaction path modelling. The computed U concentration is explained by the precipitation of schoepite or Na2U2O7. The computed Am concentration significantly exceeds the measured data. This may be attributed to sorption processes on corrosion products of the glass, which are relevant also for lanthanide elements under the conditions of the experiments. This hypothesis is tested by solid solution approaches and by computing sorption of Am onto SiO2 precipitates.     

Evaluation of life cycle inventory data for recycling systems

This paper reviews databases on material recycling (primary as well as secondary production) used in life cycle assessments (LCA) of waste management systems. A total of 366 datasets, from 1980 to 2010 and covering 14 materials, were collected from databases and reports. Totals for CO₂-equivalent emissions were compared to illustrate variations in the data. It was hypothesised that emissions from material production and the recycling industry had decreased over time due to increasing regulation, energy costs and process optimisation, but the reported datasets did not reveal such a general trend. Data representing the same processes varied considerably between databases, and proper background information was hard to obtain, which in turn made it difficult to explain the large differences observed. Those differences between the highest and lowest estimated CO₂ emissions (equivalents) from the primary production of newsprint, HDPE and glass were 238%, 443% and 452%, respectively. For steel and aluminium the differences were 1761% and 235%, respectively. There is a severe lack of data for some recycled materials; for example, only one dataset existed for secondary cardboard. The study shows that the choice of dataset used to represent the environmental load of a material recycling process and credited emissions from the avoided production of virgin materials is crucial for the outcome of an LCA on waste management. Great care and a high degree of transparency are mandatory, but advice on which datasets to use could not be determined from the study. However, from the gathered data, recycling in general showed lower emission of CO₂ per kg material than primary production, so the recycling of materials (considered in this study) is thus beneficial in most cases.     

An energetic life cycle assessment of C&D waste and container glass recycling in Cape Town,South Africa

This study presents the results of a comparative life cycle assessment (LCA) on the energy requirements and greenhouse gas (GHG) emission implications of recycling construction and demolition (C&D) rubble and container glass in Cape Town, South Africa. Cape Town is a medium sized city in a developing country with a growing population and a rising middle class, two factors that are resulting in increased generation of solid waste. The City is constrained in terms of landfill space and competing demands for municipal resources.The LCA assessment was based on locally gathered data, supplemented with ecoinvent life cycle inventory data modified to the local context. The results indicated that recycling container glass instead of landfilling can achieve an energy savings of 27% and a GHG emissions savings of 37%, with a net savings still being achieved even if collection practices are varied. The C&D waste results, however, showed net savings only for certain recycling strategies. Recycling C&D waste can avoid up to 90% of the energy and GHG emissions of landfilling when processed and reused onsite but, due to great dependence on haulage distances, a net reduction of energy use and GHG emissions could not be confidently discerned for offsite recycling. It was also found that recycling glass achieves significantly greater savings of energy and emissions than recycling an equivalent mass of C&D waste.The study demonstrated that LCA provides an important tool to inform decisions on supporting recycling activities where resources are limited. It also confirmed other researchers’ observations that strict adherence to the waste management hierarchy will not always result in the best environmental outcome, and that more nuanced analysis is required. The study found that the desirability of recycling from an energy and climate perspective cannot be predicted on the basis of whether such recycling conserves a non-renewable material. However, recycling that replaces a virgin product from an energy-intensive production process appears to be more robustly beneficial than recycling that replaces a product with little embodied energy. Particular caution is needed when applying the waste management hierarchy to the latter situations.