Temporal trends in agricultural water use and the relationships to hydroclimatic factors in the High Plains aquifer region

The High Plains aquifer (HPA) is the primary water source for agricultural irrigation in the US Great Plains. The water levels in many locations of the aquifer have declined steadily over the past several decades because the rate of water withdrawals exceeds recharge, which has been a serious concern to the water resources management in the region. We evaluated temporal trends and variations in agricultural water use and hydroclimatic variables including precipitation, air temperature, reference evapotranspiration, runoff, groundwater level, and terrestrial water storage across the HPA region for different periods from 1985 to 2020 at the grid, county, or region scale. The results showed that water withdrawals decreased from 21.3 km³/year in 1985 to 18.2 km³/year in 2015, while irrigated croplands increased from 71,928 km² in 1985 to 78,464 km² in 2015 in the entire HPA. The hydroclimatic time-series showed wetting trends in most of the northern HPA, but drying and warming trends in the southern region from 1985 to 2020. The groundwater level time-series indicated flat trends in the north, but significant declining in the central and southern HPA. Trends in irrigation water withdrawals and irrigation area across the HPA were controlled by the advancement of irrigation systems and technologies and the management of sustainable water use, but also were affected by dynamical changes in the hydroclimatic conditions.     

阴角邻面火灾作用下L型钢管混凝土柱耐火极限研究

运用有限元软件ABAQUS计算L形带肋钢管混凝土柱阴角相邻两面受火全过程下的耐火极限,分析了阴角邻面受火方式下构件内部温度场和应力场的变化规律,在此基础上分析荷载比、宽厚比、计算长度、加劲肋纵向间距、荷载偏心率、荷载角等参数对耐火极限的影响规律。数据表明:荷载比、计算长度对构件耐火极限影响较大,随着荷载比和计算长度的增大,耐火极限基本呈线性下降;加劲肋间距对构件耐火性能影响较小;由于L形柱的特殊形式,偏心荷载对耐火极限的影响规律较复杂,荷载作用点偏向低温区可以提高耐火极限。     

Safety-related conclusions for the application of ultrasound in explosive atmospheres

International safety regulations such as EN 1127-1 consider ultrasound to be an ignition source. Currently, applications of ultrasound in explosive atmospheres have to comply with a threshold value of 1 mW/mm². However, it is unclear as to how this intensity has to be measured and, therefore, this threshold value is poorly defined. Moreover, it is based on theoretical estimations in analogy to other ignition sources and there are no publications or significant records on these estimations. Within a research project at PTB, it has now been investigated experimentally in relation to worst-case considerations including airborne ultrasound, focused MHz ultrasound in liquids and acoustic cavitation. On the basis of the results of the research it is now possible to revise the current regulations and to specify measures for safe operation of ultrasonic applications in explosive atmospheres. In this context, for ultrasound coupled directly to gaseous atmospheres a new threshold value of 170 dB (re. 20 μPa) can be suggested, and for ultrasonic applications in liquids, an augmentation can be made to the threshold to 400 mW/mm².     

Numerical study on premixing characteristics and explosion process of starch in a vertical pipe under turbulent flow

Fire and explosion accidents are frequently caused by combustible dust, which has led to increased interest in this area of research. Although scholars have performed some research in this field, they often ignored interesting phenomena in their experiments. In this paper, we established a 2D numerical method to thoroughly investigate the particle motion and distribution before ignition. The optimal time for the corn starch dust cloud to ignite was determined in a semi-closed tube, and the characteristics of the flame propagation and temperature field were investigated after ignition inside and outside the tube. From the simulation, certain unexpected phenomena that occurred in the experiment were explained, and some suggestions were proposed for future experiments. The results from the simulation showed that 60–70 ms was the best time for the dust cloud to ignite. The local high-temperature flame clusters were caused by the agglomeration of high-temperature particles, and there were no flames near the wall of the tube due to particles gathering and attaching to the wall. Vortices formed around the nozzle, where the particle concentration was low and the flame spread slowly. During the explosion venting, particles flew out of the tube before the flame. The venting flame exhibited a “mushroom cloud” shape due to interactions with the vortex, and the flame maintained this shape as it was driven upward by the vortex.     

混凝-氧化法处理印染废水的实验研究

实验使用混凝-氧化法对印染废水进行处理,采用混凝-氧化法不仅能有效地去除废水中的固体悬浮物和颜色,而且也能去除大部分的CODCr,去除率在60%～70%左右。本研究采用混凝沉淀与氧化的组合工艺对其进行处理实验,着重研究了有关工艺条件与CODCr去除率的关系。用混凝-氧化法处理印染废水,确定最佳混凝和氧化条件。实验中考察了pH值、混凝剂加入量、沉降时间、氧化剂加入量和氧化时间等对CODCr去除率的影响。     

崇明东滩夏季沉积物厌氧氨氧化菌群落结构与空间分布特征

为探索长江口崇明东滩表层沉积物中是否存在厌氧氨氧化菌以及厌氧氨氧化菌的群落结构与空间分布特征,以崇明东滩高、中、低潮滩夏季表层沉积物中总DNA为模板,PCR扩增沉积物样品中厌氧氨氧化菌特异性16S rDNA片段,通过克隆、测序,构建相应基因文库,将文库中有效克隆序列分别提交到GenBank中进行相似序列搜索,并利用MEGA5绘制系统发育树.分析结果发现,克隆序列CM-L-7和CM-L-18与已发现厌氧氨氧化菌Candidatus"Scalindua sp."同源性达98%,CM-L-13与Candidatus"Scalindua wagneri"同源性达94%,CM-M-6与Candidatus"Kuenenia sp."同源性达94%,CM-M-22与Anaerobicammonium-oxidizing planctomycete JMK-1的同源性达95%,CM-H-15与Candidatus"Kuenenia stuttgartiensis"的同源性达94%.表明,崇明东滩高、中、低潮滩表层沉积物中均存在厌氧氨氧化菌,但所属菌属不同,低潮滩以Candidatus"Scalindua"为主,中、高潮滩以Candidatus"Kuenenia"为主.相比之下,中潮滩厌氧氨氧化菌群落结构较为复杂.部分克隆序列与已发现厌氧氨氧化菌存在较大进化距离,表明崇明东滩可能还存在其他具有潜在厌氧氨氧化功能的细菌.     

石墨炉原子吸收法测定自来水中总铬升温参数的探讨

对石墨炉原子吸收测定自来水中总铬的方法进行优化。通过对石墨炉升温程序条件进行优化,找出其最佳参数值,其方法的线性关系良好,相关系数为0.999以上,回收率在96.7%~99.5%之间。该法操作简便,灵敏度和准确度高,线性好,便于推广,适合自来水中总铬的测定。     

三维电极法处理苯酚废水影响因素研究

根据电解原理,采用自制三维电极反应器对苯酚废水进行处理。在pH值为3,反应时间为120min,电解电压为15V,极板间距为10cm,曝气强度为0.6m3/h反应条件下,苯酚和COD的最大去除率分别为89.1%和83.2%。表明三维电极法适用于处理浓度较高、且有毒性的废水,是快捷、经济、高效的废水处理方法。     

冲激式湿式除尘器在燃用高挥发份煤锅炉除尘的应用

本文总结了各种类型除尘器在使用当地含挥发份较高的长焰煤种过程中的除尘效率,及其性能特点,详细阐述了冲击式湿式除尘器在燃用高挥发份煤锅炉除尘中的应用效果。     

废水厌氧处理研究前沿和趋势探讨

废水厌氧处理作为一种有竞争力的、经济的、日益成熟的生物处理工艺,是一种集环境保护、能源回收和生态良性循环于一体的技术,具有良好的社会、经济、环境效益,其研究和应用日益受到重视,工程化推广应用极其广泛。本文讨论了废水厌氧反应器的发展历程、厌氧氨氧化生物脱氮技术、两相生物反应器、高硫酸盐有机废水厌氧处理技术,并对目前废水厌氧处理的热点问题及发展趋势进行了展望。