Response of bioaerosol cells to photocatalytic inactivation with ZnO and TiO2 impregnated onto Perlite and Poraver carriers

•ZnO/Perlite inactivated 72% of bioaerosols in continuous gas phase. •TiO₂ triggered the highest level of cytotoxicity with 95% dead cells onto Poraver. •Inactivation mechanism occurred by membrane damage, morphological changes and lysis. •ZnO/Poraver showed null inactivation of bioaerosols. •Catalysts losses at the outlet of the photoreactor for all systems were negligible. Bioaerosols are airborne microorganisms that cause infectious sickness, respiratory and chronic health issues. They have become a latent threat, particularly in indoor environment. Photocatalysis is a promising process to inactivate completely bioaerosols from air. However, in systems treating a continuous air flow, catalysts can be partially lost in the gaseous effluent. To avoid such phenomenon, supporting materials can be used to fix catalysts. In the present work, four photocatalytic systems using Perlite or Poraver glass beads impregnated with ZnO or TiO₂ were tested. The inactivation mechanism of bioaerosols and the cytotoxic effect of the catalysts to bioaerosols were studied. The plug flow photocatalytic reactor treated a bioaerosol flow of 460×1 0⁶ cells/m³_air with a residence time of 5.7 s. Flow Cytometry (FC) was used to quantify and characterize bioaerosols in terms of dead, injured and live cells. The most efficient system was ZnO/Perlite with 72% inactivation of bioaerosols, maintaining such inactivation during 7.5 h due to the higher water retention capacity of Perlite (2.8 mL/g_Perlite) in comparison with Poraver (1.5 mL/g_Perlite). However, a global balance showed that TiO₂/Poraver system triggered the highest level of cytotoxicity to bioaerosols retained on the support after 96 h with 95% of dead cells. SEM and FC analyses showed that the mechanism of inactivation with ZnO was based on membrane damage, morphological cell changes and cell lysis; whereas only membrane damage and cell lysis were involved with TiO₂. Overall, results highlighted that photocatalytic technologies can completely inactivate bioaerosols in indoor environments.     

Trace elements and microbiological parameters in farmed Nile tilapia with emphasis on muscle,water, sediment and feed

Fish may bioaccumulate contaminants from the aquatic environment and extend them to the food chain provoking risks to human health. This study evaluated the microbiological parameters of the pond´s water and trace elements concentrations in samples of water, sediment, feed and muscle of farmed Nile tilapia used for human consumption in southern Brazil. A total of 240 fish were collected from 12 tilapia farms. Sediment, tank water and dry ration used in the animals' diet were collected for analysis. Analysis were performed by Energy Dispersion X-ray Fluorescence (EDXRF), Inductively Coupled Plasma Mass Spectrometer (ICP-MS), Induced Coupled Plasma Optical Emission Spectrometer (ICP-OES), and Atomic Absorption Spectrometer (AAS-VGA). In addition, the microbiological analysis of the water was carried out. The concentrations of Se, I, Fe, Cu and Zn in fish muscle were higher than the recommended by the Brazilian legislation, considering the advised daily intake for adults. The arsenic element had concentrations above the limit stipulated by the present Brazilian legislation, observed in all samples of muscle, sediment and tank water highlighting a possible environmental and fish contamination by the toxic element. Moreover, the arsenic concentration in the water presented a positive correlation (ρ?=?0.33) with arsenic in the muscle, suggesting that tilapia is a good environmental bioindicator, once they properly reflect the levels of arsenic in the water. It is suggested to perform an arsenic speciation for quantification of the inorganic form and accurate assessment of the degree of toxicity in the muscle samples and risks it can bring to human health. Regarding the other potentially toxic elements (Hg, Pb and Cd), and microbiological analysis of water it was verified that the consumption of the fish in question does not raise risks, since the values are within a quality benchmark established by law. The concentration of total and fecal coliforms in pond´s water in the facilities was in agreement with the microbiological indexes required by the legislation of CONAMA class II. Western region presented the lowest concentrations of fecal coliforms when compared to the other regions. There was no significant difference in the microbiological counts of total heterotrophic bacteria, Vibrio spp. and Pseudomonas spp. among the regions.     

Backwater Confluences of the Ohio River: Organic and Inorganic Fingerprints Explain Sediment Dynamics in Wetlands and Marinas

In the Ohio River (OR), backwater confluence sedimentation dynamics are understudied, however, these river features are expected to be influential on the system’s ecological and economic function when integrated along the river’s length. In the following paper, we test the efficacy of organic and inorganic tracers for sediment fingerprinting in backwater confluences; we use fingerprinting results to evidence sediment dynamics controlling deposition patterns in confluences used for wetland and marina functions; and we quantify the spatial extent of tributary drainages with wetland and marina features in OR confluences. Both organic and inorganic tracers statistically differentiate sediment from stream and river end‐members. Carbon and nitrogen stable isotopes produce greater uncertainty in fingerprinting results than inorganic elemental tracers. Uncertainty analysis of the nonconservative tracer term in the organic matter fingerprinting application estimates an apparent enrichment of the carbon stable isotopes during instream residence, and the nonconservativeness is quantified with a statistical approach unique to the fingerprinting literature. Wetland and marina features in OR confluences impact 42% and 11% of tributary drainage areas, respectively. Sediment dynamics show wetland and marina confluences experience deposition from river backwaters with longitudinally linear and nonlinear patterns, respectively, from sediment sources.     

天津市地表水体与沉积物中7种高关注酚类化合物的污染特征与生态风险分析

为探究地表水体与沉积物中酚类化合物的污染分布特征和生态风险,选择天津市3个水源地与6条主要河流,采集了26个地表水样与6个沉积物样品,利用固相萃取与超声萃取、高效液相色谱-串联质谱法(HPLC-MS/MS)测定了水样及沉积物中1-萘酚(1-naphthol)、壬基酚(nonylphenol, NP)、双酚A(bisphenol A, BPA)、2-苯基苯酚(biphenyl-2-ol)、3,4-二氯酚(3,4-dichlorophenol)、四溴双酚A(tetrabromobisphenol A, TBBPA)和对叔丁基苯酚(p-tert-butylphenol, PTBP)等7种高关注酚类化合物的浓度水平,并应用物种敏感性分布(species sensitivity distribution, SSD)法和熵值法(ecological risk quotient, RQ)评估7种酚类化合物水环境和沉积物的生态风险。结果表明,地表水样中7种酚类化合物均全部检出;其中壬基酚的检出浓度最高,其次为四溴双酚A、对叔丁基苯酚、1-萘酚、2-苯基苯酚、3,4-二氯酚和双酚A。沉积物中酚类化合物的污染分布规律与水样相似,除双酚A外的目标物全部检出。其中,壬基酚浓度比其他物质浓度高2个数量级。风险评估结果显示,壬基酚对水环境与沉积物存在不可接受的风险;而四溴双酚A、对叔丁基苯酚、1-萘酚、2-苯基苯酚、3,4-二氯酚和双酚A则对环境具有较低风险或者存在一定的风险。     

混合酸消解变化对土壤和沉积物中痕量硒分析影响

基于各3种采集环境样本、国家标准物质的土壤和沉积物,以当前环境监测行业常用的3种消解方法,探讨20种混合酸系统条件在消解条件变化中对复杂样本硒元素测定的影响。确定了最佳土壤和沉积物消解的组合为王水系统(盐酸∶硝酸∶氢氟酸∶过氧化氢∶高氯酸=3∶1∶1∶1∶1),各消解法的处理结果部分(n=5)∶水浴法消解时间仅需0.5h,总处理时间2h,准确度回收率达101%~104%,精密度RSD为1.95%~2.20%;电热板法总处理时间较长(7.5h),回收率106%,RSD偏高为8.46%,不推荐使用;微波法处理的总时间亦长达7.0h,回收率93.8%,但精密度亦偏高为8.24%,因此采用水浴法应用于环境样本的测定。该优化消解方法已直接应用于环境中农业、建筑用土和管道淤泥沉积物的3种样品类型前处理,利用同一优化条件即可快速对应土壤和沉积物性质样品,单次可批量处理72~84个样本,解决高通量样品痕量硒测定需求,提供环境污染监测和检测行业一参考依据。     

Contamination of lead (Pb) in the coastal sediments of north and south of Iran: a review study

Coastal areas of Iran are heavily affected by urbanisation, industrialisation, and maritime activities. One consequence of this environmental pressure is the contaminants accumulation, as heavy metals, into the marine ecosystem. In this review, the coastal areas in the north and south of the country were assessed for lead (Pb) contamination of, one of the most toxic metals found in the environment. All studies conducted during 2006–2016 with at least 10 specimens that reported the mean and standard deviation of Pb were considered in this review. Heterogeneity between studies was assessed using the Q and I² statistics. The Pb mean concentration overall studies was estimated to be 21.88?µg/g (95% CIs: 16.25–27.50). Random effect model showed no statistical difference in mean Pb concentration levels between south and north coasts. However, the variability in Pb mean concentrations within southern coasts was considerable and statistically significant. Moreover, the Pb concentrations in the northern coasts of Persian Gulf and Oman Sea, in south of Iran, decreased in the following order Hormozgan > Khuzestan > Sistan-VA-Balluchestan > Bushehr while in the southern coasts of Caspian Sea, in north of Iran, decreased in the order Guilan > Mazandaran > Golestan.     

船舶螺旋桨射流对湘江河床底泥扰动影响分析

船舶航行时螺旋桨产生的射流会对河道水流产生扰动,这种扰动是否能引起河床底泥的再悬浮需要更深入的论证分析。通过对比分析螺旋桨射流发展规律的研究成果,以湘江典型河段为研究对象,结合实船测量结果和此段河流地质资料,探讨了螺旋桨射流对湘江长株潭段河床底泥扰动的影响,并对此段河床底泥起动和悬浮条件进行了理论分析。结果表明:在周围环境流速较低的条件下,螺旋桨射流初始速度、河床水深及泥沙粒径是决定泥沙是否运动的主要因素。湘江长株潭河段已基本库区化,大部分河道平均水深远大于航道的标准水深2.8 m,河床泥沙平均粒径大于0.87 mm,其中细颗粒泥沙很少,由于螺旋桨射流断面平均流速小于泥沙起动流速,悬浮指标计算值远大于4,因此可以判断船舶正常航行在该段河流时底泥难以起动和再悬浮。     

三峡水库香溪河库湾氮磷分布状况及沉积物污染评价

为了解三峡大坝蓄水完成之后香溪河库湾水体及沉积物中氮、磷的分布状况以及沉积物污染水平,2013年4月对三峡水库香溪河库湾进行调查采样,测定表层水及沉积物中氮磷含量和形态组成。结果表明,香溪河库湾表层水总磷(TP)含量范围为0.20~0.51 mg·L~(-1),总氮(TN)含量范围为0.54~2.25 mg·L~(-1),TP主要由磷酸盐(PO_4~(3-))组成,TN主要由硝酸盐(NO_3~-)以及氨氮(NH_4~+)组成,TP在空间上呈现从河口向库尾逐渐升高的分布格局,TN分布从河口向库尾逐渐降低。香溪河库湾沉积物中TP含量变化范围为642~1 189 mg·kg~(-1),TN含量变化范围为867~1 718 mg·kg~(-1),沉积物TP含量分布呈现上游高下游低,沉积物TN分布趋势呈现中间高,两头低。沉积物中TP主要由无机磷(IP)组成,有机磷(OP)所占比例较小,其中IP由钙磷(Ca-P)、铁铝磷(Fe/Al-P)组成,三者含量:Ca-POPFe/Al-P,且沉积物TP含量空间变化受到三者影响(P0.05)。采用单一因子标准指数法对香溪河库湾沉积物中TN、TP污染水平进行评价,结果表明,表层沉积物中TN、TP最低级别污染指数平均值为2.0和1.6,表层沉积物中TN、TP污染指数均超过最低污染水平,且TP的严重级别污染指数达到0.5以上。三峡水库三期蓄水完成以后,香溪河库湾表层水体中氮磷含量较初期蓄水有所升高,各样点沉积物中氮磷含量表现出相同的趋势,沉积物中不稳定磷释放对水体富营养化具有影响,香溪河库湾的表层沉积物已经受到一定的污染,磷污染水平较高。     

基于3S技术对太湖底质及水质总磷的研究

应用3S技术研究了太湖底质与水质总磷(TP)的分布情况,并结合水华频次分析了其相关性。结果表明:2016—2018年,太湖底质TP年均值在433~537 mg/kg波动,水质TP年均值从0.064 mg/L上升至0.087 mg/L。从空间分布来看,底质TP、水质TP和水华频次均呈现“西高东低”的规律,太湖西部区尤其是竺山湖区是需要开展治理的重点区域。3年间,太湖西部区水质TP上升,而底质TP与入湖河流TP下降,说明内源磷污染是太湖西部区水质TP升高的主要原因,须加强科学清淤。     

Integrating channel design and assessment methods based on sediment transport capacity in gravel bed streams

Natural channel design (NCD) and analytical channel design (ACD) are two competing approaches to stable channel design that share fundamental similarities in accounting for sediment transport processes with designs based on hybrid fluvial geomorphology and hydraulic engineering methods. In this paper, we highlight the linkage between ACD's capacity/supply ratio (CSR) and NCD's sediment capacity models (FLOWSED/POWERSED), illustrating how ACD and NCD have reached a point of convergent evolution within the stream restoration toolbox. We modified an existing CSR analytical spreadsheet tool which enabled us to predict relative channel stability using both conventional bed load transport equations and regional sediment regression curves. The stable channel design solutions based on measured data most closely matched the Parker (ACD) and/or Pagosa good/fair (NCD) relationships, which also showed the greatest CSR sensitivity in response to channel alterations. We found that CSR differences among the transport relationships became more extreme the further the design width deviated from the supply reach, suggesting that a stable upstream supply reach may serve as the best design analog. With this paper, we take a step toward resolving lingering controversy in the field of stream restoration, advancing the science and practice by reconciling key differences between ACD and NCD in the context of reach scale morphodynamics.