Determination of 27 pharmaceuticals and personal care products (PPCPs) in water: The benefit of isotope dilution

• Isotope dilution method was developed for the determination of 27 PPCPs in water. • The established method was successfully applied to different types of water samples. • The correction effect of corresponding 27 ILSs over 70 d was investigated. • Benefit of isotopic dilution method was illustrated for three examples. Pharmaceuticals and personal care products (PPCPs) are a unique group of emerging and non-persistent contaminants. In this study, 27 PPCPs in various water samples were extracted by solid phase extraction (SPE), and determined by isotope dilution method using liquid chromatography coupled to tandem triple quadruple mass spectrometer (LC-MS/MS). A total of 27 isotopically labeled standards (ILSs) were applied to correct the concentration of PPCPs in spiked ultrapure water, drinking water, river, effluent and influent sewage. The corrected recoveries were 73%–122% with the relative standard deviation (RSD)<16%, except for acetaminophen. The matrix effect for all kinds of water samples was<22% and the method quantitation limits (MQLs) were 0.45–8.6 ng/L. The developed method was successfully applied on environmental water samples. The SPE extracts of spiked ultrapure water, drinking water, river and wastewater effluent were stored for 70 days, and the ILSs-corrected recoveries of 27 PPCPs were obtained to evaluate the correction ability of ILSs in the presence of variety interferences. The recoveries of 27 PPCPs over 70 days were within the scope of 72%–140% with the recovery variation<37% in all cases. The isotope dilution method seems to be of benefit when the extract has to be stored for long time before the instrument analysis.     

固相萃取-超高效液相色谱/三重四极杆质谱法同时测定地表水中8种亚硝胺类化合物

建立了固相萃取（SPE）-超高效液相色谱/三重四极杆串联质谱（UPLC-MS/MS）同时测定地表水中8种亚硝胺类化合物的方法。水样中目标物经椰壳活性炭固相萃取小柱吸附富集，小柱经氮气吹干后采用二氯甲烷洗脱。待测样品采用Atlantis T₃柱，以水-甲醇作为流动相进行梯度洗脱，大气压力化学电离源（APCI）正离子模式多反应监测方式（MRM）进行检测，内标法定量分析。8种目标物在相关线性范围内线性良好(r≥0.9950)，地表水加标回收率为55.4%~90.4%，相对标准偏差为3.1%~14.3%，方法检出限为1.1 ~1.8 ng/L。本方法准确度和灵敏度高，适用于快速测定地表水中8种亚硝胺类化合物含量。     

山东省主要河流中抗生素污染组成及空间分布特征

采用固相萃取-液相色谱/串联质谱法研究了山东省境内四大流域主要河流中抗生素污染组成及空间分布特征,涉及我国用量最大的6类共20种抗生素。结果表明:20种抗生素均有检出,且大环内酯类、喹诺酮类和四环素类抗生素整体检出浓度较高。就流域而言,半岛诸河流域抗生素污染较小,平均总质量浓度61.4 ng/L;海河流域、小清河流域和淮河流域相对较为严重,平均总质量浓度分别为232、175、118 ng/L。抗生素空间分布呈现一定的规律,检出浓度较高的点位主要集中在人口密集区下游,抗生素污染与周边生活污水、养殖企业废水和城市污水处理厂排水密切相关,而且抗生素组成可从一定程度上反映出污染来源。     

交通限行对大气颗粒物及PM2.5中二NFDA1英的影响

为了研究北京大气颗粒物和二NFDA1英(PCDD/Fs)的污染状况以及评估交通限行对大气颗粒物和PCDD/Fs的影响。利用同位素稀释高分辨率气相色谱/高分辨率质谱(HRGC/HRMS)联用法和USEPA 1613B 标准方法,以中国地质大学(北京)东门为采样点,采集大气PM_2.5、PM₁₀、TSP样品,对北京市交通限行期间以及交通限行前后等不同交通状况下颗粒物浓度及大气PM_2.5中17种2,3,7,8-PCDD/Fs污染特征进行了监测。结果表明,PM_2.5、PM₁₀、TSP的日均质量浓度在交通限行前分别为126、202、304 μg/m³,限行期间分别为39、78、93 μg/m³,限行结束后分别为79、126 μg/m³。PM_2.5中17种PCDD/Fs的质量浓度(毒性浓度)3个时段分别为1 804 fg/m³(70 fg I-TEQ/m³)、252 fg/m³ (9 fg I-TEQ/m³)和1 196 fg/m³ (48 fg I-TEQ/m³)。北京市交通限行期间颗粒物浓度和二 NFDA1 英浓度显著低于交通限行前后,交通源减排措施的实施是大气颗粒物和二 NFDA1英污染水平降低的主要原因,从减排效果看,交通源减排措施对大气细颗粒物(PM_2.5)的控制效果明显好于大气粗颗粒物。     

Enhanced triallyl isocyanurate (TAIC) degradation through application of an O3/UV process: Performance optimization and degradation pathways

• UV/O₃ process had higher TAIC mineralization rate than O₃ process. • Four possible degradation pathways were proposed during TAIC degradation. • pH impacted oxidation processes with pH of 9 achieving maximum efficiency. • CO₃^2– negatively impacted TAIC degradation while HCO₃^– not. • Cl^– can be radicals scavenger only at high concentration (over 500 mg/L Cl^–). Triallyl isocyanurate (TAIC, C₁₂H₁₅N₃O₃) has featured in wastewater treatment as a refractory organic compound due to the significant production capability and negative environmental impact. TAIC degradation was enhanced when an ozone(O₃)/ultraviolet(UV) process was applied compared with the application of an independent O₃ process. Although 99% of TAIC could be degraded in 5 min during both processes, the O₃/UV process had a 70%mineralization rate that was much higher than that of the independent O₃ process (9%) in 30 min. Four possible degradation pathways were proposed based on the organic compounds of intermediate products identified during TAIC degradation through the application of independent O₃ and O₃/UV processes. pH impacted both the direct and indirect oxidation processes. Acidic and alkaline conditions preferred direct and indirect reactions respectively, with a pH of 9 achieving maximum Total Organic Carbon (TOC) removal. Both CO₃^2– and HCO₃^– decreased TOC removal, however only CO₃^2– negatively impacted TAIC degradation. Effects of Cl^– as a radical scavenger became more marked only at high concentrations (over 500 mg/L Cl^–). Particulate and suspended matter could hinder the transmission of ultraviolet light and reduce the production of HO· accordingly.     

MoS_2/Bi_2S_3异质结光催化剂的制备及其光催化性能

以五水硝酸铋为铋源、钼酸钠为钼源、硫脲为硫源,采用简单的一步水热法合成了MoS_2/Bi_2S_3异质结光催化剂,采用XRD,SEM,TEM,BET,UV-Vis DRS技术对其进行了表征。表征结果显示,MoS_2纳米片在Bi_2S_3微棒表面生长,增加了比表面积和活性位点,并形成异质结构,促进了光生载流子的迁移,抑制了电子-空穴对的再复合。实验结果表明:钼酸钠与五水硝酸铋的质量比为1∶2时制备的复合光催化剂性能最好,反应180min时对亚甲基蓝的去除率可达96.4%,明显高于MoS_2和Bi_2S_3,且具有较高的稳定性;该催化剂对罗丹明B、甲基橙和4-硝基苯酚的去除率分别为97.1%、93.1%和90.5%,表明其对污染物具有普适性。     

加速溶剂萃取-固相萃取/超高效液相色谱-串联质谱法测定沉积物中5种微囊藻毒素

建立了加速溶剂萃取-固相萃取/超高效液相色谱-串联质谱法同时测定沉积物中5种微囊藻毒素(MC-LR、MC-RR、MC-LW、MC-LF、MC-YR)的方法。选择甲醇-水(1∶4,V/V)为ASE萃取溶剂,萃取温度和萃取压力分别为80℃和13.1 MPa,固相萃取过程以HLB小柱为萃取柱,采用液相色谱-串联质谱分析。方法在5种微囊藻毒素质量浓度5~100μg/L内线性良好(r0.995),回收率为76.0%~118%,相对标准偏差为1.9%~12.0%,检出限为2~3μg/kg,定量下限为8~12μg/kg。该方法已用于西太湖沉积物的检测,具有较好的方法适用性。     

制药废水生化出水的强化混凝—高级氧化深度处理组合工艺比较

采用强化混凝和高级氧化法对制药废水生化出水进行深度处理,比较了不同混凝剂、不同氧化方法（包括Na₂S₂O₈氧化、电化学氧化、Fenton/类Fenton氧化）的处理效果。实验结果表明：经聚合硫酸铁与聚丙烯酰胺强化混凝处理后,废水的COD去除率达18.5%;强化混凝与不同氧化方法联用均可使废水脱色至无色,COD去除率达70.1%~92.4%。强化混凝—电化学氧化组合工艺的出水COD为27.1 mg/L,达到GB 8978—1996《污水综合排放标准》一级标准限值要求,且成本较低,适于实际应用。     

MCM-41分子筛负载铁铈催化降解甲基橙

采用等体积浸渍法制备了负载型有序介孔Fe-Ce/MCM-41催化剂。研究了该催化剂降解甲基橙的适宜工艺条件,并采用XPS,XRD,TEM技术对该催化剂进行了表征。实验结果表明,该催化剂Fenton氧化降解甲基橙的较适宜工艺条件为:溶液pH 5.0、甲基橙溶液初始质量浓度100 mg/L、催化剂加入量2.0 g/L、H_2O_2浓度20 mmol/L,在此适宜条件下反应120 min时,甲基橙去除率接近100%。表征结果显示:Fe-Ce/MCM-41催化剂主要由铁、铈、氧、碳4种元素组成;铁与铈的摩尔比接近3∶1;铁和铈主要以Fe_3O_4和CeO_2的形态存在于催化剂表面。     

高效液相色谱串联质谱法测定某市污水处理厂进出水中的全氟化合物

通过建立直接进样-高效液相色谱串联质谱（HPLC-MS/MS）测定污水处理厂进出水中的10种全氟化合物的方法，了解污水厂进出水中全氟化合物污染情况。10种目标分析物在10~500 ng/L范围内具有良好的线性关系，方法检出限为2.3~8.3 ng/L，精密度为2.1%~7.1%，加标回收率为60.6%~91.7%。应用该方法测定某市典型污水厂进出水中的全氟化合物，进水中全氟化合物质量浓度为90.9~206 ng/L，主要污染物是PFOA、PFHxS和PFBS；出水中全氟化合物的质量浓度为67.4~158 ng/L，环境排放量为6.7~22.9 g/d，主要污染物是PFOA和PFHxS。结果表明，该方法能很好地适用于复杂基质中10种全氟化合物的检测。