Hybrid H2/Al dust explosions in Siwek sphere

Explosion indices and explosion behaviour of Al dust/H₂/air mixtures were studied using standard 20 l sphere. The study was motivated by an explosion hazard occurring at some accidental scenarios considered now in ITER design (International Thermonuclear Experimental Reactor). During Loss-of-Vacuum or Loss-of-Coolant Accidents (LOCA/LOVA) it is possible to form inside the ITER vacuum vessel an explosible atmosphere containing fine Be or W dusts and hydrogen. To approach the Be/H₂ explosion problem, Be dust is substituted in this study by aluminium, because of high toxicity of Be dusts. The tested dust concentrations were 100, 200, 400, 800, and 1200 g/m3; hydrogen concentrations varied from 8 to 20 vol. % with 2% step. The mixtures were ignited by a weak electric spark. Pressure evolutions were recorded during the mixture explosions. In addition, the gaseous compositions of the combustion products were measured by a quadruple mass-spectrometer. The dust was involved in the explosion process at all hydrogen and dust concentrations even at the combination ‘8%/100 g/m3’. In all the other tests the explosion overpressures and the pressure rise rates were noticeably higher than those relevant to pure H₂/air mixtures and pure Al dust/air mixtures. At lower hybrid fuel concentrations the mixture exploded in two steps: first hydrogen explosion followed by a clearly separated Al dust explosion. With rising concentrations, the two-phase explosion regime transits to a single-phase regime where the two fuel components exploded together as a single fuel. In this regime both the hybrid explosion pressures and pressure rise rates are higher than either H₂ or Al ones. The two fuels compete for the oxygen; the higher the dust concentration, the more part of O2 it consumes (and the more H₂ remains in the combustion products). The test results are used to support DUST3D CFD code developed at KIT to model LOCA or LOVA scenarios in ITER.     

空气污染天气过程与气象要素之间的关联性分析

随着经济和社会的不断发展,地球的环境正在遭受着严重的侵害,关于环境的问题也日益显现出来,比如全球变暖、雾霾等现象。本文分析了空气污染的因素、气象要素对空气质量的影响,并提出了防治空气污染的对策。     

伊犁盆地昭苏黄土不同粒径和相态稀土元素特征及其物源指示意义

为了探讨伊犁盆地风成沉积物质来源特征,对伊犁地区昭苏黄土剖面代表性样品各个 粒级全岩、酸溶组分和残渣组分中的稀土元素进行了分析。结果表明,各个粒级组分全岩样品 的稀土总量（ΣREE）的变化范围为114.61~178.37 μg·g?1,剖面中各个粒级组分稀土球粒陨石标 准化配分模式呈轻稀土富集,存在明显的Eu 负异常,Ce 无明显异常。各个粒级组分酸溶残渣 稀土特征与上述全岩特征类似。酸溶组分稀土的上部大陆地壳标准化呈现稳定的中稀土富集。 随着各组分粒级变粗,酸溶组分稀土占全岩比例呈现先降低后升高的趋势,即从<2 μm 组分到 16 ~32 μm 组分比例渐次降低,而后从16 ~32 μm 组分到>63 μm 渐次升高,这主要反映了以西风 为代表的远源输送体系和以近地面风为代表的近源输送体系下两种来源的碎屑碳酸盐稀土的混 合。本文不同粒径和赋存形态下稀土元素的特征表明了利用风成沉积物稀土元素反映源区物质 特征存在一定复杂性。     

Prediction of vortex height from mechanical mixing in metal matrix nanocomposite processing by means of dimensional analysis and scaling

Mechanical mixing can be used for initial dispersion and distribution of nanoparticle agglomerates in metal matrix nanocomposite (MMNC) fabrication. As vortex height increases, flow is enhanced as well as the risk of oxidate melt contamination. The goal of this study was to examine and predict vortex height using dimensional analysis while varying fluid and the angular speed of a pitched square-blade impeller. An equation proposed by Markopoulos et al. was verified for the present experimental conditions. The relevant dimensionless numbers were the Reynolds (Re), Froude (Fr) and Galilei (Ga) numbers. A modified Fr was defined (Fr*) including the shaft and blade angles of the impeller. Experiments allowed calculation of the dimensionless numbers. Two fluids, water and 50 vol% aqueous glycerine, were used. Angular clockwise speed varied from 200 to 900 rpm in 100 rpm increments. Vortex height was measured in lateral view digital images. Correlations of the dimensionless numbers yielded, first, a linear relationship of the product of dimensionless vortex height (H) and specific gravity (ρ*) with respect to Fr*. A polynomial relationship was found between H and ReFr* for each fluid. The polynomial coefficients, in turn, follow a power law behavior with respect to Ga. This allows a prediction of vortex height in other Newtonian fluids that satisfy the single-phase isothermal flow condition. Perhaps, molten aluminum used in MMNC fabrication, can be analyzed based on a simple, room temperature, low cost transparent fluid system. For the experimental conditions in this study, the equation proposed by Markopoulos et al. was valid. The predicting methodology was verified with experimental results using 25 vol% aqueous glycerine, resulting in an absolute percent error of 5.29%, comparable and lower than an error of 9.12% obtained by predicting vortex height with Markopoulos’ equation.     

Development of chemically produced hydrogen energy-based impact bonding process for dissimilar metals

There has been a growing demand in the fabrication of dissimilar metal parts for application in the automotive, aerospace, defense, chemical and nuclear industries. Welding of dissimilar materials can be accomplished via impact welding, which can minimize the formation of a continuous inter-metallic phase, while chemically bonding dissimilar metals. This paper discusses an innovative technique for bonding dissimilar metals by chemically produced hydrogen energy by reacting aluminum powder and water. Experiments were carried out to study impact bond characteristics using copper and stainless steel cylindrical billets. The influence of nosed flyer billet angle and billet mass on bonding characteristics were studied. The test results have demonstrated that the nosed flyer billet angle has significant influence on wavy bond patterns at the interface. Among the three flyer billet nose angles of 9°, 12° and 15°, the billets with a flyer angle of 15° resulted in a complete wave morphological pattern along the whole sample cross-section. This study shows the potential of developing a cost effective system/machinery where discrete metal parts can be bonded at near net shape.     

流化床O2/CO2气氛燃煤痕量元素的排放特性及控制

通过平顶山烟煤在小型流化床中的燃烧实验,采用X-射线荧光光谱仪(XRF)对低压撞击器(LPI)收集到的细颗粒物元素组成进行定量测定,研究了O2/CO2气氛下硅藻土对煤粉燃烧痕量元素的排放控制.结果表明,Zn、Mn和Ni的含量随粒径呈双峰分布,峰值分别在0.1μm和2μm附近,Hg和Co的含量在0.1μm附近有一峰值;Hg和Zn在亚微米颗粒上有一定程度的富集,Mn、Ni和Co在亚微米和超微米颗粒上的含量基本相当;当颗粒物粒径一定时,随着硅藻土含量的增加,5种元素的富集因子呈减小的趋势;随着添加剂粒径的减小,颗粒物中Hg、Mn、Zn、Ni和Co的含量呈减少的趋势;当颗粒物粒径一定时,5种元素含量顺序为MnZnNiCoHg.     

纳污湿地上覆水中重金属的监测及评价

以武河湿地为研究区域采集上覆水水样,采用ICP-AES法测定湿地水体中重金属的含量,参照有关标准用水质标准级别法对水中重金属污染情况进行了评价。结果表明:武河湿地中重金属Hg污染十分严重,各采样点均有分布且水质属劣Ⅴ类。重金属元素Cd污染并不严重,总体水质较好。重金属元素As、Cr、Cu、Pb在武河湿地中污染较轻近乎无污染,水质为Ⅰ类。由于重金属Hg的污染十分严重所以研究区内综合质量等级在4以上,水质为Ⅴ类和劣Ⅴ类,污染严重。     

电镀污染区植物重金属积累特征研究

采用野外采样室内分析方法,对泰州某电镀污染区12种优势植物和对应土壤中的Cu、Cr、Cd、Pb和Ni5种重金属含量进行测定,揭示了优势植物对复合污染重金属的富集和转运特征。结果表明,该电镀污染区土壤中Cd平均含量为4.10 mg/kg,是GB15618—2008《土壤环境质量标准》中二级标准9.1倍。植物吸收重金属的富集滞留在地上部较多,香樟对Cd,双穗雀稗、野艾篙、牛筋草对Cu,双穗雀稗对Cr,三叶草、蒲公英对Pb,双穗雀稗、苣荬菜对Ni表现出重金属植物修复的潜力,它们是修复Cd污染土壤的理想植物。     

北京河流水污染现状分析研究

通过总结近年来北京河流中氮磷、有机质和重金属等方面的研究成果,结果表明北运河水系各河段水质均较差,劣Ⅴ类水质的河流长度超过80％,城市河流污染特征明显,主要污染指标为耗氧型有机污染物和氨氮,重金属污染较轻,悬浮物中的重金属占较大的比重;永定河水系枯水期氮污染较重,主要是硝态氮超标,以颗粒态磷为主要形式的磷污染较轻,重金属含量大都低于地表水Ⅲ类标准;潮白河水系水质较好,各水质指标除个别断面外大都满足中Ⅲ类水标准,重金属含量大都符合Ⅰ～Ⅲ类水标准。     

微波消解－ICP－MS法测定土壤中稀土元素的研究

建立了电感耦合等离子体质谱（ ICP－MS）测定土壤中稀土元素的分析方法。采用HNO3＋HF酸体系用微波消解对土壤样品进行处理,以混合内标（ In、Bi）校正基体干扰和信号漂移,用ICP－MS对其中的16种稀土元素进行了测定。在优化的实验条件下,16种稀土元素标准曲线的相关系数r＞0．9999,检出限为0.012 ng／ml～0.069 ng／ml,加标回收率为84.0％～110％,相对标准偏差（n＝6）RSD均小于3.5％。该方法可用于四种不同类型土壤中稀土元素含量的测定。