武汉市一次污染过程的局地流场和边界层结构的数值模拟

利用2013年11月武汉市逐日空气质量资料、地面气象观测资料、NCEP/NCAR再分析资料和L波段雷达探空资料，通过WRF模式模拟空气污染生消过程中的局地气象条件变化，探讨特殊地形条件下边界层结构变化和局地环流在污染物生消过程中的作用和影响。结果表明：（1）武汉地区当背景环流场强的时候，由地形引起的局地流场对污染物扩散的影响就弱，反之当背景环流场弱的时候, 地形对流场影响明显:夜间为山风，白天为谷风。夜间山风与偏西北气流及偏东气流在武汉及周边地区辐合，形成气流汇聚带，在武汉地区形成一个反复污染带,即由地形引起的局地流场对污染物扩散的贡献就大；（2）武汉地区发生空气污染时，地面湿度较高，边界层呈上干下湿状态，其特征为暖而干且有偏东小风，这导致污染物不断堆积和重污染过程的形成。     

不同好氧预处理方式对餐厨垃圾产甲烷的影响

为了研究不同好氧预处理方式对餐厨垃圾厌氧消化产甲烷的影响,通过建立3个模拟厌氧生物反应器,研究了传统厌氧生物反应器C1、上层好氧预处理-厌氧生物反应器C2和底部好氧预处理-厌氧生物反应器C3 3种不同操作条件下的产甲烷过程.结果表明,挥发性有机酸的累积使C1始终处于产甲烷滞后阶段;而C2、C3的好氧预处理通过加快易水解酸化组分和过量挥发性有机酸的好氧降解,有效缓解了酸性抑制,产甲烷滞后时间明显缩短至10 d内.第32天C2停止上层曝气后,在27 d内甲烷浓度达到了50％以上,同时,产甲烷速率迅速上升,并在第81天可达到峰值773 mL/(kg·d).C3在第11天停止底部曝气后,虽然经过22 d的时间甲烷浓度即上升至50％,但之后产甲烷速率经历回落阶段后再次逐渐上升,在实验结束时仅达到517 mL/(kg·d).上层曝气的好氧预处理方式所需曝气时间相对较长,但其产甲烷启动快,与底部曝气相比,其后期的甲烷化过程更稳定并可达到较高的产甲烷速率.     

不同边沿高度油池火燃烧行为的实验和数值模拟研究

采用实验和FDS数值模拟相结合的方法,探讨了边沿高度对油池火燃烧特性的影响。在实验部分,研究了燃烧速率和表观火焰高度随边沿高度的变化趋势,并分别分析了各个阶段的热反馈机制。在实验获得不同尺度、边沿高度正庚烷油池火燃烧速率的前提下,建立相应尺度的不同边沿高度油池火的Fire Dynamics Simulator(FDS)计算模型以针对火焰高度进行了数值模拟研究,分析了实际火焰高度、火焰下探高度随边沿高度的变化趋势,并提出了相关的无量纲拟合式。     

德国铁路噪声实时监测系统研究现状

分析了德国铁路噪声在线监测的应用背景，介绍了德国铁路噪声实时监测系统的研究现状，包括测量站点的选取原则、技术结构和具体信息，列车声压级曲线时域连续变化图、单次列车通过声压级曲线图、单次列车通过参数表和等效声压级曲线图/表等测量结果的表达方法，以及无效数据的处理方式等，为我国建立铁路噪声自动监测系统提供参考。     

铁路沿线可燃重气储罐最小隔离区域划分探讨*

为保护铁路线，以某化工厂距离高铁路线最近的丙烯球罐为例，提出丙烯球罐泄漏最小隔离区域划分方法以及2种保护高铁线路方案，利用重气扩散模型和定量风险评价（QRA）软件分别进行丙烯扩散模拟、爆炸模拟，并进行危险与可操作性分析（HAZOP）和保护层分析（LOPA）。结果表明:球罐发生泄漏及火灾爆炸等事故，会给附近铁路线带来严重破坏；丙烯泄漏或球罐因周围其他设备设施或可燃物质着火而温度升高时，保护措施不足；隧道的安全可靠性要高于仅设1道防爆墙，隧道长度需覆盖最小隔离区域的可及范围，在扩散区域内也需设立普通挡墙，在极度危险情况下，需要实施高铁停开等保护措施。     

Metabolic uncoupler, 3,3′,4′,5-tetrachlorosalicylanilide addition for sludge reduction and fouling control in a gravity-driven membrane bioreactor

• Effects of metabolic uncoupler TCS on the performances of GDMBR were evaluated. • Sludge EPS reduced and transformed into dissolved SMP when TCS was added. • Appropriate TCS increased the permeability and reduced cake layer fouling. • High dosage aggravated fouling due to compact cake layer with low bio-activity. The gravity-driven membrane bioreactor (MBR)system is promising for decentralized sewage treatment because of its low energy consumption and maintenance requirements. However, the growing sludge not only increases membrane fouling, but also augments operational complexities (sludge discharge). We added the metabolic uncoupler 3,3′,4′,5-tetrachlorosalicylanilide (TCS) to the system to deal with the mentioned issues. Based on the results, TCS addition effectively decreased sludge ATP and sludge yield (reduced by 50%). Extracellular polymeric substances (EPS; proteins and polysaccharides) decreased with the addition of TCS and were transformed into dissolved soluble microbial products (SMPs) in the bulk solution, leading to the break of sludge flocs into small fragments. Permeability was increased by more than two times, reaching 60–70 L/m²/h bar when 10–30 mg/L TCS were added, because of the reduced suspended sludge and the formation of a thin cake layer with low EPS levels. Resistance analyses confirmed that appropriate dosages of TCS primarily decreased the cake layer and hydraulically reversible resistances. Permeability decreased at high dosage (50 mg/L) due to the release of excess sludge fragments and SMP into the supernatant, with a thin but more compact fouling layer with low bioactivity developing on the membrane surface, causing higher cake layer and pore blocking resistances. Our study provides a fundamental understanding of how a metabolic uncoupler affects the sludge and bio-fouling layers at different dosages, with practical relevance for in situ sludge reduction and membrane fouling alleviation in MBR systems.     

绿色生态城区规划及实践的比较研究

目前,是以提倡低碳环保、绿色生态城市为发展规划的社会,生态化建设正如火如荼地进行中。本文以中新天津生态城、曹妃甸唐山湾生态城、青岛中德生态园这三个地点作比较,以建设绿色生态城市规划协同、共生城市理念、混合开发和生态社区结构这几点进行了分析,总结了城区建设间的问题,并针对这些问题研究解决方案,以达到绿色生态区建设的目的。     

Investigation of injury severities in single-vehicle crashes in North Carolina using mixed logit models

IntroductionRoadway departure (RwD) crashes, comprising run-off-road (ROR) and cross-median/centerline head-on collisions, are one of the most lethal crash types. According to the FHWA, between 2015 and 2017, an average of 52 percent of motor vehicle traffic fatalities occurred each year due to roadway departure crashes. An avoidance maneuver, inattention or fatigue, or traveling too fast with respect to weather or geometric road conditions are among the most common reasons a driver leaves the travel lane. Roadway and roadside geometric design features such as clear zones play a significant role in whether human error results in a crash. Method: In this paper, we used mixed-logit models to investigate the contributing factors on injury severity of single-vehicle ROR crashes. To that end, we obtained five years' (2010–2014) of crash data related to roadway departures (i.e., overturn and fixed-object crashes) from the Federal Highway Administration's Highway Safety Information System Database. Results: The results indicate that factors such as driver conditions (e.g., age), environmental conditions (e.g., weather conditions), roadway geometric design features (e.g., shoulder width), and vehicle conditions significantly contributed to the severity of ROR crashes. Conclusions: Our results provide valuable information for traffic design and management agencies to improve roadside design policies and implementing appropriately forgiving roadsides for errant vehicles. Practical applications: Our results show that increasing shoulder width and keeping fences at the road can reduce ROR crash severity significantly. Also, increasing road friction by innovative materials and raising awareness campaigns for careful driving at daylight can decrease the ROR crash severity.     

横通道通风对隧道火灾烟气蔓延影响的数值模拟研究*

为探究隧道横通道通风对隧道火灾烟气蔓延的影响规律,使用火灾动力学模拟软件FDS,对不同火源位置的横通道临界风速、主隧道温度分布以及烟气层高度进行研究。研究结果表明:在一定火源功率范围内,隧道横通道临界风速与火源功率的1/3次方成正比且火源距横通道越远,临界风速越小;当火源位于交叉口,横通道使用临界风速通风时,隧道内烟气温度明显降低,烟气迅速沉降到2 m以下;当火源距离交叉口10,20 m,横通道通风会加快火源下游烟气沉降,烟气沉降速度随横通道通风速率的增大而增大;当火源位于交叉口时,烟气沉降由横通道通风对烟气的降温作用和涡旋作用共同主导,当火源位于距离交叉口10,20 m时,烟气沉降主要由涡旋作用主导。     

低碳高氮污水处理应用技术研究

针对碳氮比小于7的污水,其碳源不能满足硝化与反硝化的要求这一问题,通过改变SBR工艺的运行方式、调解工艺参数等技术手段,使其能够达标处理此类工业废水,并通过某淀粉厂的工程实例进行了验证:采用改良的SBR工艺可以对低碳高氮污水进行有效的处理。