加速溶剂萃取-固相萃取净化-高效液相色谱法测定玉米作物中多环芳烃含量

建立了加速溶剂萃取-固相萃取净化-高效液相色谱测定玉米作物中15种多环芳烃的方法,优化了试验条件.方法线性关系良好,15种多环芳烃的检出限在0.003 8～0.079μg/kg之间,空白加标试验的相对标准偏差在3.9%～11.7%之间,基质加标回收率在69.3%～115.3%之间.实际样品的测定结果表明,该方法分离效果...     

Contaminants in Muscle of Plaice and Halibut Collected From the St. Lawrence Estuary and Northwest Atlantic

Levels of aromatic hydrocarbons in muscle or plaice and halibut were determined by fluorescence, using the chrysene standard, as recommended by the International Oceanographic Commision, for the analysis of PAH in environmental extracts. Concentrations were highest in muscle of halibut collected at the most contaminated, nearshore site, in the Saguenay Fjord of the St. Lawrence Estuary, compared to other locations further from shore. Although concentrations of fluorescing compounds were not statistically different in plaice, the saturated hydrocarbons displayed unquestionably more biodegradation, with a decrease of n-alkanes and increase of branched aliphatics, at the less contaminated site. Synchronous fluorescence indicated the presence of benzenoid and biphenyl hydrocarbons in the extracted mixtures, while GC-MS-TIC analysis tentatively identified the presence of a series of benzenoid (alkyl benzenes), chlorinated (PCB and DDE), N (trialkylamines) and O (phenols) hydrocarbons. These anthropogenic compounds could derive from petroleum products, surfactants and common products used in industry and households. This study emphasizes the importance of a multispectroscopic approach when investigating complex environmental mixtures.     

The chemical basis for trail recognition in Lasius nipponensis (Hymenoptera: Formicidae)

Summary. In this paper we report on the chemical basis for trail recognition in Lasius nipponensis. On and near trails in the field, workers became aggressive against conspecific intruders and succeeded in protective contests, while intruders usually avoided confrontation. Such asymmetric interactions were also observed in the laboratory when two non-nestmate workers were sequentially placed in a clean glass dish, while mutual aggression was observed when they were placed simultaneously. Asymmetric aggression was also observed when the workers were placed in a dish previously conditioned by other workers, or when the dish was treated with the hexane rinse of the conditioned dish. The rinse contained a series of hydrocarbons, in which components and proportion were almost identical to those of the cuticular hydrocarbons of the workers, except for a lack of n-alkanes. Amounts of the hydrocarbons that remained on the dish were very small when all the tarsi of the workers were incapacitated. We therefore consider that the hydrocarbons are not adhesion of the cuticular hydrocarbons but secretion from the tarsi of workers, and serve as a key signal for trail recognition in this ant.     

Evidence for biodegradation and volatilisation of dissolved petroleum hydrocarbons during in situ air sparging in large laboratory columns

Laboratory column experiments run for up to 13 days compared air sparging of groundwater contaminated by dissolved petroleum hydrocarbons in sterile and non-sterile aquifer sediments as well as uncontaminated sediments and groundwater. Loss of dissolved BTEX compounds in the contaminated columns was very rapid, occurring through volatilisation. The majority of the dissolved total organic carbon (TOC) persisted for much longer periods however. A direct comparison between losses from sterile and non-sterile columns suggested a negligible contribution of biodegradation to the removal of TOC. This was difficult to confirm through examination of O₂ utilisation because oxidation of a small amount of reduced sulphur in the aquifer materials was the dominant sink for O₂. Despite this, it was possible to conclude that less than 22% of the removal of TOC was through biodegradation during the first three days of air sparging.     

Optimization of the recovery of plastics for recycling by density media separation cyclones

Material recovery processes are presented as the optimum option for recycling plastic wastes as a means of recovering hydrocarbon resources. There exist a large variety of automated material recovery processes for recycling of such wastes but each with significant limitations. Of these, the separation based on differences in densities is advocated as the optimum process either for producing recycled products or preparing wastes for subsequent recovery processing.Density separation processes based on cyclone type density media separation (DMS) is presented as an important, potential method for increasing plastics recycling process capacities. It is demonstrated to have the capacity to separate a significantly larger range of particle sizes than those presently processed industrially. The mathematical relationship for the prediction of quality of typical LARCODEMS type density media separations by particle size and density as expressed by the Ecart Probable is presented.A proposed device configuration is presented for density media separation to optimize the recovery and purity of both density fractions produced. It is also suggested that to be economically viable, a large scale of operation is required for industrial plastics recycling operations recovering and producing a number of different plastics with a purity to be used as a substitute for virgin material.     

Environmental assessment of garden waste management in the Municipality of Aarhus, Denmark

An environmental assessment of six scenarios for handling of garden waste in the Municipality of Aarhus (Denmark) was performed from a life cycle perspective by means of the LCA-model EASEWASTE. In the first (baseline) scenario, the current garden waste management system based on windrow composting was assessed, while in the other five scenarios alternative solutions including incineration and home composting of fractions of the garden waste were evaluated. The environmental profile (normalised to Person Equivalent, PE) of the current garden waste management in Aarhus is in the order of −6 to 8 mPE Mg⁻¹ ww for the non-toxic categories and up to 100 mPE Mg⁻¹ ww for the toxic categories. The potential impacts on non-toxic categories are much smaller than what is found for other fractions of municipal solid waste. Incineration (up to 35% of the garden waste) and home composting (up to 18% of the garden waste) seem from an environmental point of view suitable for diverting waste away from the composting facility in order to increase its capacity. In particular the incineration of woody parts of the garden waste improved the environmental profile of the garden waste management significantly.     

Evaluation of the biodegradability of copolyesters containing aromatic compounds by investigations of model oligomers

Model oligo esters of terephthalic acid with 1,2-ethanediol, 1,3-propanediol, and 1,4-butanediol have been investigated with regard to their biodegradability in different biological environments. Well-characterized oligomers with weight-average molar masses of from 600 to 2600 g/mol exhibit biodegradation in aqueous systems, soil, and compost at 60°C. SEC investigations showed a fast biological degradation of the oligomer fraction consisting of 1 or 2 repeating units, independent of the diol component used for polycondensation, while polyester oligomers with degrees of polymerization higher than 2 were stable against microbial attack at room temperature in a time frame of 2 months. At 60°C in a compost environment chemical hydrolysis also degrades chains longer than two repeating units, resulting in enhanced degradability of the oligomers. Metabolization of the monomers and the dimers as well by the microorganisms could be confirmed by comparing SEC measurements and carbon balances in a Sturm test experiment. Based on these results degradation characteristics of potential oligomer intermediates resulting from a primary chain scission from copolyesters consisting of aromatic and aliphatic dicarbonic acids can be predicted depending on their composition. These results will have an evident influence on the evaluation of the biodegradability of commercially interesting copolyesters and lead to new ways of tailor-made designing of new biodegradable materials as well.     

有机溶剂浸取石油污染土壤中的多环芳烃

采用索氏提取法和气相色谱分析了某炼油厂周边土壤中的多环芳烃的种类及含量,考察了6种有机溶剂对土壤中多环芳烃的浸取效果,探讨了溶剂与溶质溶解度参数差异对浸取效果的影响。结果表明:土壤试样中含有蒽、荧蒽、芘、、苯并[a]蒽、苯并[b]荧蒽、苯并[k]荧蒽和苯并[a]芘8种多环芳烃,其含量分别为4.20,22.05,10.62,4.26,5.54,0.80,0.94,4.18mg/kg;筛选出二氯甲烷作为土壤中多环芳烃的浸取溶剂;最佳浸取条件为浸取时间10min、浸取温度30℃、溶剂与土壤的液固比5∶1(mL/g)、土壤含水量8%,在此条件下,总多环芳烃浸出率为83.0%,各种多环芳烃的浸出率分别为蒽97.8%、荧蒽78.2%、芘99.9%、98.5%、苯并[a]蒽81.1%、苯并[b]荧蒽47.6%、苯并[k]荧蒽14.8%、苯并[a]芘58.7%。     

Migration Pathways and Remediation of Urban Runoff for PAH Control

The migration pathways for polyaromatic hydrocarbons (PAH) and the associated active attenuating mechanisms within the urban environment are examined. The interest in developing an improved understanding of PAH migration/attenuation is focused toward quantification of the cost-effectiveness of urban runoff control strategies for mitigation of PAH inputs to receiving water bodies.A case study application to the City of Sault Ste Marie demonstrates that snow removal from sub-basins with the largest deposition rates, and relatively small wet and/or dry stormwater management ponds, are the most cost-effective remediation strategies.