屏蔽服冷却系统对人体表面温度影响的研究*

为科学有效地论证多种方式组合的冷却屏蔽服在不同环境条件下对人体表面温度控制的效果，需要对冷却系统及人体敏感部位发热量进行客观评估。通过对5名健康男性的高温测试，探究人体在不同环境温度下体表温度的变化，得出胸部、背部及额头为热量最高部位，并构建以“人体-降温屏蔽服-外界环境”为主体的冷却系统数值模型，对不同环境中的屏蔽服冷却效果展开研究，分析穿戴冷却屏蔽服时人体躯干部分的温度分布及影响。结果表明:在屏蔽服中靠近胸部、背部部位引入相变材料和风扇，均可帮助人体降低体温，提高舒适度。     

Nitrogen budget and its environmental loading in an urban ecosystem with the rapid urbanisation of China

A detailed nitrogen (N) budget has been developed for an urban ecosystem based on the method of material flow analysis. How increased human activity and urbanisation influences N cycling have also been analysed. Total N input and output in the urban ecosystem of Zhengzhou City (ZUE) was calculated at 304.8?Gg was 275.3?Gg year^?1, resulting in an N accumulation of 29.5?Gg year^?1. Industry and human life activities, which respectively accounted for 43.8% and 34.2% of total N inputs and 52.6% and 29.1% of total N outputs, were the core of N flow in the urban ecosystem. Humans activities mediated more than 98% N inputs into the ZUE, 73.2% of N was released into the atmosphere and 11.7% into hydrosphere. This very large volume of released N could contribute to regional problems. High energy consumption, insufficient wastewater treatment facility practices, and low N use efficiency are the primary causes of pollution. The major challenge ahead for the urban ecosystem is how to manage high-intensity N pollutant inputs to the urban ecosystems coupled with incomplete N cycling and removal. Based on the analysis of the N budget and loading, this study also proposes an N management strategy for the ZUE.     

Application of environmentally conscious manufacturing strategies for an automotive component

Application of appropriate environmentally conscious manufacturing strategies enables the sustainable development of products and processes. Automotive component manufacturers recognise the potential of applying appropriate strategies for attaining Triple Bottom Line benefits. In this context, three strategies such as eco-efficiency, waste minimisation and material efficiency are being applied to minimise environmental impacts associated with the manufacture of automotive products and its associated processes. A case study of an automotive component manufacturing firm has been exemplified. After conducting the study, the potential environmental impact was reduced by 20% and eco-efficiency was improved by 13%. Further, improvements have been observed in terms of overall resource consumption and material efficiency. The overall power consumption was reduced by 18% and weight of the component was reduced by 11%. The study aimed at improving the sustainable performance of product by incorporating green and environmentally friendlier manufacturing practices.

Abbreviations: USEPA: United Nations Environmental Protection Agency; OECD: Organisation for Economic Co-operation and Development; WBCSD: World Business Council for Sustainable Development; Eco-QFD: Environmental Quality Function Deployment; WCED: World Commission on Environment and Development; LCA: Life Cycle Assessment     

Ti3C2纳米层状材料对废水中Cr（Ⅵ）的光催化去除性能

以Ti₃AlC₂为原料,采用HF刻蚀工艺制备出12种Ti₃C₂纳米层状材料,对其形貌进行了表征,并考察了以其作为光催化剂对废水中Cr（Ⅵ）的处理效果。实验结果表明：HF体积分数为80%、刻蚀时间为48 h时得到的MX-80-48的形貌较好;MX-80-48具有类似石墨烯的二维层状结构,纳米层厚度约20~50 nm,孔径2~10 nm,比表面积14.8 m²/g,在400~700 nm可见光范围内表现出强烈的吸光性;当Cr（Ⅵ）的初始质量浓度为40.00 mg/L、MX-80-48投加量为200 mg/L、pH=2、反应时间4 h（暗反应1 h+光照3 h）时,Cr（Ⅵ）去除率可达100%。     

基于GM-SVR的小样本条件下化工设备可靠性预测

为了准确预测化工设备可靠性趋势，针对化工设备失效寿命数据为小样本的情形，基于灰色估计法与支持向量回归机在小样本数据处理中的优势，建立了失效寿命时间服从三参数威布尔分布的化工设备可靠性模型；结合GM（1，1）和SVR对模型进行参数估计，在压缩机可靠性分析中进行了实例应用，对比分析了最小二乘法、灰色估计法和GM-SVR的估计效果。研究结果表明:GM-SVR对威布尔分布参数的估计精度明显优于最小二乘法和灰色估计法，可以有效地应用于化工设备失效数据为小样本时的可靠性预测。     

水质氨氮在线监测仪对污染源低浓度样品测定的研究

水质氨氮在线监测仪广泛用于各类水体中氨氮的在线监测,随着我国水质氨氮减排工作的开展,污染源废水中氨氮浓度逐渐降低,目前市场上的水质氨氮在线监测仪是否适用于低浓度氨氮样品的在线监测成为广大环保工作者关心的问题。选取3种不同类型的水质氨氮在线监测仪分别进行低浓度标样和实际水样测试,并对结果进行了讨论。     

瓦斯抽采PC-CAS基封孔材料优化及其膨胀作用分析*

为了研制以硅酸盐/铝酸盐水泥、生石灰、生石膏为主的PC-CAS基封孔材料，采用正交试验优化材料配比、开展膨胀力研究，并用扫描电镜观测料-煤胶结形貌。研究结果表明:材料的最优配比为A2B2C4，其具备优良的流动性、强度及致密性，造浆量达2 100 mL/kg；PC-CAS基材料具有显著的膨胀性，其膨胀力随时间先增大而后趋于稳定，并且该膨胀力随着径向约束的提高而增大；相比于FP材料，PC-CAS基材料产生的膨胀力能够显著降低材料-煤岩界面的空隙并在一定程度上压密煤体内部的裂隙；该材料产生的膨胀力可压密封孔段围岩、提高封孔质量，并为后期“二次注浆”提供保压条件。工业试验结果表明，采用PC-CAS基材料进行封孔可显著改善抽采效果，将原有平均浓度10.11%提升至20.08%。     

Challenges for modelling and integrating environmental performances in concept design: the case of an automotive component lightweighting

The objective of this paper is to discuss the main barriers for modelling and integrating the environmental performances in the automotive concept design. Incorporating environmental assessment in the early design phase of a vehicle component is known as an important challenge that car makers need to face in order to develop more sustainable design solutions; in this regard, the Life Cycle Assessment is the most widespread methodology for the environmental assessment and comparison of alternatives. The present work illustrates the combination of such methodology with the traditional design procedure at two different levels of the component design phase, material choice and concept design. In particular, the potential benefits originated by a lightweight solution for the automotive component Throttle Body are evaluated by considering environmental and technical implications at the same level. The case study shows that a multi-disciplinary approach for design effectively allows the integration of the environmental issue in the company’s established procedures. However, interpretation of results is still a challenging aspect due to the inevitable contradicting elements which should not discourage to develop comprehensive sustainability assessment within the early design stage.     

侧向风速作用下聚氨酯泡沫双火源火蔓延研究

为探究环境风作用下逆向双点火源聚氨酯泡沫火蔓延及融合行为，开展多组对照实验并从材料传热机理角度分析侧向风速对火蔓延行为中火羽流形态、质量损失和辐射热流场等特征参数的影响。结果表明:风速与上述参数之间存在非线性关系。环境风效应使火焰被拉长且敷贴于预热区表面，增大预热区面积和热反馈；侧向风速的增加对FPU板材质量损失的影响逐渐弱化，且板材的熔滴率与风速呈正相关；无论侧向风是否存在，两侧逆向火焰融合后均达到整个蔓延过程中的峰值温度；风速的存在限制了火焰温度与辐射热通量峰值，也缩短了温度和辐射峰值出现的时间。     

Explosion suppression of porous materials in a pipe-connected spherical vessel

To study the suppression of different porous materials on the explosion of combustible gas, some experiments were implemented. The porous materials were categorized into three kinds, including six subcategories, and the explosion suppression characteristics of the thin iron hoop, one-layer porous materials, two-layer composite porous materials, and three-layer composite porous materials were studied and analyzed. The results show that a rarefaction wave appears in the spherical vessel during the rapid development stage of combustion explosion. Further, the thin iron hoop could enhance the gas explosion intensity. And the explosion intensity suppression effect of the porous materials is obvious, the best effects of one-layer, two-layer and three-layer porous materials are from Fe–Ni 10 mm/40 PPI, Fe–Ni 10 mm/90 PPI + Al₂O₃ 10 mm/30 PPI, and Al₂O₃ 10 mm/50 PPI + Fe–Ni 10 mm/40 PPI + SiC 20 mm/20 PPI, respectively. According to the surface morphology of the porous materials, the anti-sintering ability of the three categories of porous materials follows the order of Al₂O₃ > SiC > Fe–Ni. Besides, the thickness and pore size of the combined porous material was changed, which has a great influence on the explosion pressure and the explosion intensity.