合成氨副产CO2气的回收与利用

CO2是《京都议定书》要求减排的6种温室气体之一,《京都议定书》还确立了有助于发展中国家获得资金和先进技术的清洁发展机制（CDM）。本文结合实际工程案例,介绍了合成氨副产CO2气的回收和利用方法,为我国氮肥行业申请CDM项目资助,回收利用CO2,减少CO2排放提供技术参考。     

从COD测定废液中回收银

研究从COD测定的废液中回收银的工艺.在废液中分离出氯化银,经洗涤后加锌置换,还原为银.该工艺简便易行,原材料普通易得.适用于实验室及工业生产的应用.回收银的纯度可达99％以上.     

GCMS法测定大气醛类恶臭物质的采样袋适用性研究

采用气袋采样-GCMS分析法测定大气中丙醛等5种醛类恶臭物质,对Tedler等5种不同材质采样袋进行适用性研究。结果表明,Tedler 2号采样袋对低浓度醛类回收率影响最小,低浓度醛类在其中能稳定存放12 h,在PVDFs采样袋中低浓度醛类须在6 h内测定,高浓度醛类在Tedler 2号采样袋和PVDFs采样袋中能较稳定地保存24 h,24 h内的回收率在78%以上。     

Phosphorus recovery from biogas fermentation liquid by Ca–Mg loaded biochar

Shortage in phosphorus (P) resources and P wastewater pollution is considered as a serious problem worldwide. The application of modified biochar for P recovery from wastewater and reuse of recovered P as agricultural fertilizer is a preferred process. This work aims to develop a calcium and magnesium loaded biochar (Ca–Mg/biochar) application for P recovery from biogas fermentation liquid. The physico-chemical characterization, adsorption efficiency, adsorption selectivity, and postsorption availability of Ca-Mg/biochar were investigated. The synthesized Ca–Mg/biochar was rich in organic functional groups and in CaO and MgO nanoparticles. With the increase in synthesis temperature, the yield decreased, C content increased, H content decreased, N content remained the same basically, and BET surface area increased. The P adsorption of Ca–Mg/biochar could be accelerated by nano-CaO and nano-MgO particles and reached equilibrium after 360 min. The process was endothermic, spontaneous, and showed an increase in the disorder of the solid–liquid interface. Moreover, it could be fitted by the Freundlich model. The maximum P adsorption amounts were 294.22, 315.33, and 326.63 mg/g. The P adsorption selectivity of Ca–Mg/biochar could not be significantly influenced by the typical pH level of biogas fermentation liquid. The nano-CaO and nano-MgO particles of Ca–Mg/biochar could reduce the negative interaction effects of coexisting ions. The P releasing amounts of postsorption Ca–Mg/biochar were in the order of Ca–Mg/B600 > Ca–Mg/B450 > Ca–Mg/B300. Results revealed that postsorption Ca–Mg/biochar can continually release P and is more suitable for an acid environment.     

Simulation of a Hazardous and Noxious Substances (HNS) spill in the marine environment: Lethal and sublethal effects of acrylonitrile to the European seabass

Despite the extensive maritime transportation of Hazardous and Noxious Substances (HNS), there is a current lack of knowledge on the effects posed by HNS spills on the marine biota. Among the HNS identified as priority, acrylonitrile was selected to conduct ecotoxicological assays. We assessed the acute and subletal effects of acrylonitrile in seabass, followed by a recovery phase to simulate the conditions of a spill incident. The work aimed at testing a broad range of biological responses induced by acrylonitrile. Sublethal exposure to the highest two doses increased the fish mortality rate (8.3% and 25% mortality in 0.75 and 2 mg L⁻¹ acrylonitrile concentrations), whereas no mortality were observed in control and 0.15 mg L⁻¹ treatments. Additionally, important alterations at sub-individual level were observed. Acrylonitrile significantly induced the activities of Catalase– CAT and Glutathione S-Transferase – GST; and the levels of DNA damage were significantly increased. Conversely, Superoxide Dismutase– SOD – activity was found to be significantly inhibited and no effects were found on Lipid Peroxidation– LPO and ethoxyresorufin O-deethylase – EROD – activity. Following a 7 d recovery period, the levels of CAT, GST and EROD fell to levels at or below those in the control. In the 2 mg L⁻¹ group, SOD remained at the levels found during exposure phase. This study has gathered essential information on the acute and subletal toxicity of acrylonitrile to seabass. It also demonstrated that 7 d recovery allowed a return of most endpoints to background levels. These data will be useful to assist relevant bodies in preparedness and response to HNS spills.     

Toward sustainable livelihoods after war: Reconstituting rural land tenure systems

Land tenure plays a primary role in sustainable development efforts. However armed conflict and its repercussions reconfigure the network of social relations upon which all land tenure systems depend. In post‐conflict settings new laws have the opportunity to address tenure issues in the context of what people are already doing ‘on the ground’, with a view to moving from the fluidity of post‐conflict situations to a more solidified and peaceful social and legal environment. However there exists a lack of tools to analyze postwar land tenure and the prospects for reconstituting tenure systems to support recovery and development. This paper uses the Sustainable Livelihoods framework to examine postwar land tenure issues in order to draw out latent opportunities within emergent informal smallholder tenure constructs which may have utility in the reconstitution of national tenure systems.     

ICP-AES法测定大气降水中微量金属元素

利用电感耦合等离子体原子发射光谱法(ICP-AES)对降水中的Al、Ba、Cr、Fe、Ni、Ti和Zn 7种微量金属元素进行了同时测定。通过信噪比选取了这7种元素的最佳分析谱线和最优仪器测试条件。在此条件下,7种元素的线性相关系数r均大于0.999,6次测试样品的相对标准偏差均小于5%,Al、Ba、Cr、Fe、Ni、Ti和Zn的检出限分别为0.79、0.34、0.33、0.25、0.54、0.08和0.85μg/L。空白加标回收率为93.24%~100.88%,该方法操作简单、准确、快速,适用于大气降水中多种微量金属元素的同时测定。     

Printed wiring boards for mobile phones: characterization and recycling of copper

The popularization of mobile phones, combined with a technological evolution, means a large number of scrap and obsolete equipment are discarded every year, thereby causing economic losses and environmental pollution. In the present study, the printed wiring boards scrap of mobile phones were characterized in order to recycle some of the device components, using techniques of mechanical processing, hydrometallurgy and electrometallurgy. The use of the techniques of mechanical processing (milling, particle size classification, magnetic and electrostatic separation) was an efficient alternative to obtain a concentrated fraction (mainly iron in the magnetic fraction and copper in the conductive fraction) and another fraction containing polymers and ceramics. At the end of mechanical processing, a concentrated fraction of metals could be obtained with an average concentration of 60% copper. This concentrated fraction in metals was dissolved in aqua regia and sent to electrowinning to recover 92% of the dissolved copper. The obtained cathodes have a copper content above 95%, which demonstrates the technical feasibility of recovery of copper using the techniques of mechanical processing, hydrometallurgy and electrometallurgy.     

Recovery of temperate-stream fish communities from disturbance: A review of case studies and synthesis of theory

To evaluate the relative effect of autecologic factors, site-specific factors, disturbance characteristics, and community structure on the recovery of temperate-stream fish communities, we reviewed case histories for 49 sites and recorded data on 411 recovery end points. Most data were derived from studies of low-gradient third- or fourth-order temperate streams located in forested or agricultural watersheds. Species composition, species richness, and total density all recovered within one year for over 70% of systems studied. Lotic fish communities were not resilient to press disturbances (e.g., mining, logging, channelization) in the absence of mitigation efforts (recovery time >5 to >52 yr) and in these cases recovery was limited by habitat quality. Following pulse disturbances, autecological factors, site-specific factors, and disturbance-specific factors all affected rates of recovery. Centrarchids and minnows were most resilient to disturbance, while salmonid populations were least resilient of all families considered. Species within rock-substrate/nest-spawning guilds required significantly longer time periods to either recolonize or reestablish predisturbance population densities than did species within other reproductive guilds. Recovery was enhanced by the presence of refugia but was delayed by barriers to migration, especially when source populations for recolonization were relatively distant. Median population recovery times for systems in which disturbances occurred during or immediately prior to spawning were significantly less than median recovery times for systems in which disturbances occurred immediately after spawning. There was little evidence for the influence of biotic interactions on recovery rates.