我国居住建筑室内PM_(2.5)研究现状及进展

分析了我国居住建筑室内PM_(2.5)污染水平,总结了现阶段PM_(2.5)的研究方法,主要包括理论分析法、数值模拟法和实验测试法。指出室外源是室内PM_(2.5)的主要污染来源,而室内烟草烟雾、烹饪及人员活动也会严重影响室内PM_(2.5)浓度。针对目前研究中存在的问题,提出了标定典型建筑在不同影响因素下的I/O比范围、研究家具和家电的颗粒物释放状况、加强农村室内外空气颗粒物污染调查等建议。     

泰州市冬季空气质量变化特征

为了解泰州市冬季空气质量变化特征,于2013年12月27日—2014年1月7日对NO2,SO2,O3,CO,PM10和PM2.5进行了监测,结合地面气象资料和HYSPLIT轨迹模式分析了污染物的来源与传输过程。结果表明,观测期间AQI优良率仅为25%,PM10和PM2.5日均值超标率分别为58.3%,75.0%;有机碳是泰州市ρ(PM2.5)中最高的化学组分,其次是富钾和元素碳。PM2.5主要来源为汽车尾气、工业源、燃煤,分别占来源比例21.76%,16.52%,15.54%。局地污染源和不利气象条件是造成大气污染的主要原因。     

河流型饮用水水源保护区划分比较

比较分析了国内外河流型水源保护区划分的原则、方法和标准,例证了我国不同省份的划分实践。指出,我国各省多采用经验值划分水源保护区范围,部分省份划分方案久未更新,没有充分发挥保护区的作用。提出,应进一步细化水源保护区划分规范指导要求,及时修订省级水源保护区划分方案,并借鉴国外水源保护区划分经验,通过调整水质标准、重视公众参与、利用地理信息系统等方式划分水源保护区,从源头上预防水源污染,降低饮用水公共风险,保障饮用水安全。     

上海某饮用水源地不同形态氮的时空分布研究

在2010~2012年进行的上海某水源地水质监测资料的基础上,应用纳氏试剂分光光度法等分析方法研究该水源地2011年1~10月总氮、氨氮、硝酸盐氮、亚硝酸盐氮等不同形态的氮素在水体中的空间分布规律及时间变化规律。并就其氮的来源、迁移转化机理和对氮的迁移转化有较大影响的因素进行研究和分析,得出该水库水体中各种形态氮以硝酸盐氮为主,平均占总氮的71.6%,氨氮及亚硝酸盐氮各占总氮的4.39%及0.95%;水体中的温度、光照条件、溶解氧、点位位置分布、水深等是影响各氮形态含量与分布的重要环境因子。     

汞分析仪直接测定土壤中总汞的方法研究

建立了利用RP91C-RA915M汞分析仪直接测定土壤中总汞的方法。该方法直接固体进样,省去了常规方法加酸消解、赶酸、定容等繁琐的前处理步骤;利用标准土壤绘制工作曲线,无需反复稀释标准储备液配制标准溶液,测定了方法检出限、精密度及准确度。结果表明此方法准确、可靠,是一个比较理想的分析方法。本方法的检出限为0.25μg/kg,相对标准偏差为1.98%~4.92%,标准样品测定准确,加标回收率为92.8%~106%。     

北京市道路积雪污染及特性研究

通过2009~2012年对北京市区道路旁积雪的取样,分析了积雪中污染物的浓度和特性,并对国内外普遍关注的融雪剂污染问题及其控制进行了初步分析。得出道路积雪中+NH 4-N、TN、TP、COD、SS、Cd等污染物主要来自交通活动,氯化物主要来自氯盐融雪剂;与《地表水环境质量标准》相比,道路积雪中主要污染物为NH+4-N、TN、COD、BOD和氯化物,Cu、Zn、Pb、Cd等重金属的污染水平不高,可达到Ⅴ类水体标准;相同地点近似降水量条件下,积雪中TP、COD、SS的平均浓度高于降雨径流;北京市交通主干道及人行道上喷撒氯盐融雪剂的量高于国外道路,控制其污染主要通过源头减少使用量、使用替代融雪剂、严格融雪剂标准和使用方法、严肃责任追究、加强宣传教育等措施。     

Investigation of carbonyl compound sources at a rural site in the Yangtze River Delta region of China

Carbonyl compounds are important intermediates in atmospheric photochemistry, but their primary sources are still not understood well. In this work, carbonyls, hydrocarbons, and alkyl nitrates were continuously measured during November 2011 at a rural site in the Yangtze River Delta region of China. Mixing ratios of carbonyls and hydrocarbons showed large fluctuations during the entire measurement. The average level for total measured volatile organic compounds during the pollution episode from 25th to 27th November, 2011 was 91.6 ppb, about 7 times the value for the clean period of 7th-8th, November, 2011. To preliminarily identify toluene sources at this site, the emission ratio of toluene to benzene (T/B) during the pollution episode was determined based on photochemical ages derived from the relationship of alkyl nitrates to their parent alkanes. The calculated T/B was 5.8 ppb/ppb, significantly higher than the values of 0.2-1.7 ppb/ppb for vehicular exhaust and other combustion sources, indicating the dominant influence of industrial emissions on ambient toluene. The contributions of industrial sources to ambient carbonyls were then calculated using a multiple linear regression fit model that used toluene and alkyl nitrates as respective tracers for industrial emission and secondary production. During the pollution episode, 18.5%, 69.0%, and 52.9% of measured formaldehyde, acetaldehyde, and acetone were considered to be attributable to industrial emissions. The emission ratios relative to toluene for formaldehyde, acetaldehyde, and acetone were determined to be 0.10, 0.20 and 0.40 ppb/ppb, respectively. More research on industrial carbonyl emission characteristics is needed to understand carbonyl sources better.     

Apportioning aldehydes: Quantifying industrial sources of carbonyls

<正>In their recent Journal of Environmental Sciences publication,Wang and colleagues provide field evidence that industrial activities can contribute substantially to atmospheric carbonyl concentrations(Wang et al.,2015).These results may helpto explain underestimations of carbonyl emissions in currently available emission inventories,and highlight the need for an improved understanding of industrial sources of this class of compounds.In the atmosphere,carbonyl compounds photolyze to yield     

Composition and source apportionment of dust fall around a natural lake

The aim of this study was to determine the source apportionment of dust fall around Lake Chini, Malaysia. Samples were collected monthly between December 2012 and March2013 at seven sampling stations located around Lake Chini. The samples were filtered to separate the dissolved and undissolved solids. The ionic compositions(NO-3, SO2-4, Cl-and NH+4) were determined using ion chromatography(IC) while major elements(K, Na, Ca and Mg) and trace metals(Zn, Fe, Al, Ni, Mn, Cr, Pb and Cd) were determined using inductively coupled plasma mass spectrometry(ICP-MS). The results showed that the average concentration of total solids around Lake Chini was 93.49 ± 16.16 mg/(m2·day). SO2-4, Na and Zn dominated the dissolved portion of the dust fall. The enrichment factors(EF) revealed that the source of the trace metals and major elements in the rain water was anthropogenic, except for Fe. Hierarchical agglomerative cluster analysis(HACA) classified the seven monitoring stations and 16 variables into five groups and three groups respectively. A coupled receptor model, principal component analysis multiple linear regression(PCA-MLR), revealed that the sources of dust fall in Lake Chini were dominated by agricultural and biomass burning(42%),followed by the earth's crust(28%), sea spray(16%) and a mixture of soil dust and vehicle emissions(14%).