供水管网震后流量监测点的动态分级优化布局研究

为了提高管网地震监测点布局的准确性和合理性，基于管网微观水力计算模型和动态分级法，提出供水管网震后流量监测点的动态分级优化布局模型。首先，利用管网微观水力计算模型计算管段流量的影响系数，构建管段的影响系数矩阵，并利用信息熵确定管段权重；其次，标准化处理影响系数矩阵，通过聚类迭代提出供水管网地震流量监测点优化布局的动态分级方法，对供水管网震后流量监测点进行优化布置分级评定；最后，根据工程实例进行方法实践，结果表明:供水管网中的管线分类较为科学合理，地震监测点在供水管网上分布也比较均匀，而且该模型在一定程度上消除了人为因素的影响，保障了震时管网的监控效果和日常建设的合理性。     

Progress and challenges in consolidating the management of Amazonian protected areas and indigenous territories

Effective management refers to the ability of a protected area or indigenous territory to meet its objectives, particularly as they relate to the protection of biodiversity and forest cover. Effective management is achieved through a process of consolidation, which among other things requires legally protecting sites, integrating sites into land‐use planning, developing and implementing management and resource‐use plans, and securing long‐term funding to pay for recurrent costs. Effectively managing all protected areas and indigenous territories in the Amazon may be needed to avoid a deforestation tipping point beyond which regional climatic feedbacks and global climate change interact to catalyze irreversible drying and savannization of large areas. At present, protected areas and indigenous territories cover 45.5% (3.55 million km²) of the Amazon, most of the 60–70% forest cover required to maintain hydrologic and climatic function. Three independent evaluations of a long‐term large‐scale philanthropic initiative in the Amazon yielded insights into the challenges and advances toward achieving effective management of protected areas and indigenous territories. Over the life of the initiative, management of sites has improved considerably, particularly with respect to management planning and capacity building, but few sites are effectively managed and many lack sufficient long‐term financing, adequate governance, support of nongovernmental organizations, and the means to withstand economic pressures. The time and money required to complete consolidation is still poorly understood, but it is clear that philanthropic funding is critical so long as essential funding needs are not met by governments and other sources, which could be on the order of decades. Despite challenges, it is encouraging that legal protection has expanded greatly and management of sites is improving steadily. Management of protected areas in other developing countries could be informed by improvements that have occurred in Amazonian countries.     

海洋平台圆柱体坠落运动轨迹及落点分析

传统的角度偏差经验值方法导致落物风险评价过程中的落点和危险区预测存在较大误差，科学化、立体化、完整化、多因素概化的落物轨迹和落点分析方法及工具缺位。为此，以海洋平台圆柱体落物为研究对象开展先导研究，在2D运动理论模型基础上，考虑3维、6度受力与运动参数，引入粘性拖曳力系数经验公式、海流运动、旋转升力和力矩项，建立了具有普适性的落物水下3D运动轨迹预测模型，并以现场实验数据校验表明模型方法可行、结果更可信；据此以Matlab 2016为程序设计平台编制了海洋平台圆柱体坠落运动预测分析工具（MREDP），分析了坠落运动落点分布规律。研究结果表明:随着初始倾斜角度的增大，落点偏移距离呈现先增后降的趋势，于62°时达到最大值，运动轨迹整体呈现螺线曲率减小、向轨迹曲线外开口侧偏移趋势；落点分布变化可分为Y轴偏移稳定主导阶段、X轴偏移实力型快速主导阶段和X轴偏移机会型主导阶段3个阶段；相对MREDP预测结果，DNVGL-RP-F107经验性角度偏差推荐结果较为保守，MREDP可为DNVGL-RP-F107提供更加准确、可信的轨迹曲线和落点取值。基于分析结果，提出了采用Monte Carlo方法表征实际工程中起始运动参数随机性和入水撞击产生的不确定性等建议。     

Flash point prediction for the binary mixture of phosphatic solvents and n-dodecane from UNIFAC group contribution model

The flash point temperature of Tri-n-butyl phosphate(TBP) and Tri-iso-amyl phosphate(TiAP) in n-dodecane binary mixture has been measured for the entire concentration range using the continuously closed cup flash point apparatus based on the ASTM D6450 method. The flash point was predicted using the UNIFAC group contribution model. The measured flash point was also compared with the prediction from the NRTL, UNIQUAC and Ideal solution models. The UNIFAC model is able to predict the flash point fairly well for the TBP–dodecane mixture and for TiAP–dodecane mixture no improvements is obtained over the ideal solution assumption. The flash point shows positive deviation from ideal solution behavior for both the binary mixture.     

Safety assessment of the film boiling chemical vapor infiltration (FB-CVI) process through a system-theoretic accident model and process (STAMP)

Film boiling chemical vapor infiltration (FB-CVI) is considered as one of the fastest process methodologies for manufacturing carbon-carbon (C–C) composite products and possesses various advantages compared to conventional methodologies. However, there are safety concerns associated with this process for large-scale manufacturing, mainly owing to the intrinsic nature of the precursor and the process conditions. Considering the multifunctional interactions of the various systems during the process, a system-theoretic process analysis (STPA)/system theoretic accident model and process (STAMP) model is used to perform a safety analysis of the hazardous states of the FB-CVI process at the system level. As a case study, the FB-CVI process equipment employed for the manufacturing of C–C composites is considered. The safety constraints present in the system are assessed for adequacy through a hazard analysis by STPA/STAMP. The analysis through STPA/STAMP demonstrated the capability to create proactive strategies for the design and realization of process equipment that can be employed to manufacture C–C composite products through the FB-CVI process.     

Determination of emergency assembly point for industrial accidents with AHP analysis

Major industrial accidents, which are a type of technological disaster, are very important due to the security risks and financial damages that threaten the environment and human health in today's industrialization. In this study, it was aimed to propose an approach that will guide the decision makers to choose the emergency assembly point that should be in the distance or shelter where the employees will be not affected by the negative consequences of emergencies within the scope of the obligation of industrial establishments preparing an internal emergency plan for major industrial accidents. For this purpose, in the first stage, modelling studies were carried out with ALOHA (Areal Locations of Hazardous Atmospheres) Software over possible accident scenarios in an industrial establishment containing different types and amounts of hazardous chemicals. As a result of modelling studies, possible toxic emissions, fire and explosion effect distances and threat zones for the industrial establishment were obtained. In the second stage, the weights of the main and sub-selection criteria to be used in determining the assembly point were calculated. This stage was carried out based on the comparison data obtained as a result of the questionnaire applied to professionals with the help of AHP (Analytic Hierarchy Process) method, which is one of the multi-criteria decision making methods. In the last stage, three candidate points were selected considering the physical effect areas determined in the first stage in the boundaries of the establishment, where the employees were evaluated to be affected the minimum from the negative consequences of industrial accidents. These candidate points were evaluated again with the AHP method on the basis of the sub-criteria whose relative weights were determined in the second stage and a selection was made. As a result, an approach that provides the solution of our problem was obtained.     

Flash point of biodiesel/glycerol/alcohol mixtures for safe processing and storage

Mixtures of biodiesel, glycerol, and ethanol/methanol are commonly processed and stored in biodiesel production. In this work, non-ideal models are used to calculate the Flash Points (FPs) of binary and ternary mixtures, using data available from different feedstocks. Despite the fact that biodiesel is considered safer than common diesel fuels, results show a synergistic effect of biodiesel/methanol and biodiesel/ethanol mixtures, resulting in a reduction of the flash point of mixtures to values lower than the ones of pure compounds. Most soluble ternary mixtures were found flammable, the only exception being mixtures with a relatively lower alcohol content (45% mol. ethanol or 42% methanol) at temperature lower than 303 K. Accidental increase in temperature can cause domino effect, due to the higher solubility and the formation of new flammable ternary mixtures.     

西安市PM_(2.5)污染源位置确定的模型应用研究

针对空气中PM2.5污染物的传播问题,以西安市的情况为实例,合理考虑风力等天气和季节因素的影响,建立能够刻画该地区PM2.5的发生和演变规律的有风高斯点源扩散数学模型,代入相关数据后,利用MATLAB软件求解出PM2.5污染源由一区扩散到另一区的浓度,最后由综合的各区总浓度得出PM2.5污染源的位置,并与该市实际检测到PM2.5数据进行对比分析。结果表明,确定的位置比较准确,该方法能为城市污染治理提供参考。     

Experimental study on filtration and continuous regeneration of a particulate filter system for heavy-duty diesel engines

This study investigated the filtration and continuous regeneration of a particulate filter system on an engine test bench, consisting of a diesel oxidation catalyst（DOC） and a catalyzed diesel particulate filter（CDPF）. Both the DOC and the CDPF led to a high conversion of NO to NO2 for continuous regeneration. The filtration efficiency on solid particle number（SPN） was close to100%. The post-CDPF particles were mainly in accumulation mode. The downstream SPN was sensitively influenced by the variation of the soot loading. This phenomenon provides a method for determining the balance point temperature by measuring the trend of SPN concentration.     

基于生活垃圾分类的厨余垃圾采样方法研究

与复杂的混合生活垃圾相比,厨余垃圾成分较单一,需要针对性的采样方法.本研究基于生活垃圾分类背景,在《生活垃圾采样和分析方法》(CJ/T 313—2009)的基础上,就采样位点和采样节点数对分类存放的厨余垃圾采样的影响展开研究.研究结果表明,仅采集垃圾桶中间位点的样品不具有代表性,不同情景应有不同的采样策略.当厨余垃圾流节点数少于2时需采集所有节点,当厨余垃圾流节点数为3~7时需采集2个节点,而当厨余垃圾节点数为8~18时需采集3个节点,均少于CJ/T 313—2009中要求的采样节点数.厨余垃圾的总量增大,则其最少采样节点数相应上升,但最少采样点受到厨余垃圾流节点数的制约.