南京市典型地区大气多环芳烃污染特征及健康风险评价

采用气相色谱-质谱法,于2016年9月和12月对南京市2个典型地区大气中16种多环芳烃(PAHs)的质量浓度进行分析,并开展了PAHs组成特征、来源解析及人体健康风险评价研究。结果表明,工业区(六合区)和生活区(江宁区)大气(气态和可吸入颗粒态)中16种PAHs的质量浓度分别为914.82和712.27 ng/m~3,苯并[a]芘毒性等效浓度分别为274.1和309.84 ng/m~3,且呈现冬季高、秋季低的特征。比值法源解析结果表明,燃煤污染是六合区PAHs污染主要来源,而江宁区主要表现为交通污染。人体健康风险评价结果表明,六合区和江宁区人群通过大气吸入PAHs的超额致癌风险分别为5.17×10~(-5)和5.85×10~(-5),均略高于可接受水平10~(-6)。     

海洋风电场水下噪声评估与管理研究

总结了海洋风电场建设中水下噪声的主要类型与声学特性,基于国内外水下噪声对海洋生物影响的最新研究成果,分析了海洋风电场噪声对生态环境的可能影响,尤其是近岸海域海洋风电施工期冲击式打桩噪声对海洋生物的影响。在此基础上,参考《海上风电工程环境影响评价技术规范》的相关内容,提出了海洋风电场水下噪声测量与评估方法,以及控制与降低噪声的措施建议。     

Environmental life cycle assessment of different types of the municipal wastewater pipeline network

With the onset of social life, humans have considered waste disposal as essential, and they have been able to repel it through brick and clay channels. Checking sewage pipes for energy consumption and a longer lifetime than other sewage system components is important. Climate change and exploitation of industrial resources have made environmental impacts, which are important factors in decision making. The purpose of this study was to introduce the most suitable type of sewage pipe considering environmental protection. Therefore, we applied the environmental life cycle assessment (LCA) method, using Sima Pro 8.2.3 software for the one-kilometer length of concrete pipes (300 mm in diameter), Polyvinyl chloride (PVC), and polyethylene (PE) (315 mm in diameter). Also, the BEES method and sensitivity analysis were used to validate the results. The comparison between three types of municipal wastewater pipes indicated that PE pipes are a more environmentally friendly option than PVC, and concrete pipes in pipe recycling, reducing extraction from untapped resources, and inefficient extraction of resources. Electricity, diesel fuel, and sulfate resistance cement consumption for concrete production are the most pollution elements in the LCA of concrete pipes. Usage of PVC granular, sanitary landfill of PVC pipes, and using hydraulic drill in LCA of PVC pipes are the most elements of generating pollution. The usage of PE granules, PE pipes landfilling, hydraulic excavator, and electricity consumption in the LCA of the PE pipes are the greatest polluting parameters.     

基于地理探测器的土壤重金属影响因子分析及其污染风险评价

地理探测器能快速定量化揭示驱动重金属含量影响因素的强度,这对于重金属空间预测模型构建变量的确定和土壤污染修复措施的精准实施具有重要意义。利用地理探测器模型,对5种土壤重金属元素Cu、Zn、Pb、Cr、Ni的空间分布和11种环境因子的交互作用进行定量评估,通过单因子指数法进行重庆市土壤重金属污染风险评价。结果表明:研究区内土壤Cu、Zn、Cr和Pb的平均含量是重庆市土壤背景值的1.3—1.4倍,Ni含量低于背景值;其中Cu、Pb达到重度污染水平,其余3种重金属为中度或轻度污染水平。5种重金属元素中Cu和Pb为高度变异(变异系数为0.57、0.4),Zn、Cr和Ni为中等变异(变异系数为0.22—0.29),且各重金属元素之间呈显著正相关性,表明研究区重金属富集受人为干扰影响较大,且污染具有复合性或同源性。地理探测器的因子探测发现高程、坡度和土壤类型对5种土壤重金属含量的解释力最显著,说明地势和土壤类型是土壤重金属含量分布差异的最主要影响因素。交互作用探测发现,高程与其他因子交互作用是重金属空间分异的主导因素,气候条件和土壤类型也是重要影响因子。土壤重金属空间分布是多种因素共同作用的结果,而高程、坡度和土壤类型具有较强的解释力,这些因子可作为土壤重金属含量空间预测模型的辅助变量,也可促进重金属污染治理措施的靶向实施。     

北京市典型废弃物焚烧源2010—2017年二NFDA1英排放特征和减排效果分析

分析2010—2017年北京市三类典型废弃物焚烧源的废气二NFDA1英排放监测数据,计算排放因子和排放量,评估减排政策成效,并分析不同排放源达标排放时同类物分布特征异同和变化规律,探讨影响排放的重要因素。结果表明: 5家焚烧源平均排放浓度为 0.008～0.069 ng/m³(以TEQ计,下同),废气二NFDA1英排放因子为 0.027～1.7 μg/t,2016年向空气中排放的二NFDA1英量为 0.002 5～0.058 g；生活垃圾、危险废物和医疗废物焚烧源的低、高氯代同类物质量分数比的平均值分别为接近于 0.5、大于0.5和小于0.5,危险废物焚烧源的 ∑PCDFs、∑PCDDs质量分数比的平均值大于2； 123478-HxCDF和123678-HxCDF质量浓度接近且线性相关,具有相近的生成机理和去除效率； I-TEQ变化趋势与∑PCDFs质量分数的变化趋势基本一致,活性炭喷射和布袋除尘的去除效率是影响二NFDA1英排放的重要因素之一；危险废物焚烧源HWI1随运行时间增加排放浓度增加,而及时更换烟道管壁有助于消除“记忆效应”的不良影响。     

A proactive process risk assessment approach based on job hazard analysis and resilient engineering

Complex systems often experience a long period of incubation before accidents occur. Therefore, a proactive risk assessment is essential for process safety. The conventional job hazard analysis (JHA) method has been an effective tool to conduct a process risk assessment in the high-risk industrial field. However, the conventional JHA is inadequate for the proactive risk assessment since it is usually conducted during and before one specific operation process. Operations such as startup and maintenance are performed repeatedly on the lifecycle of a plant. Therefore, the risk reduction measures for the industrial process should include not only preventive actions obtained from the conventional JHA but also recovery ones. Resilience engineering (RE) has proven to be helpful for the recovery analysis of a complex system. The objective of this paper is to propose a proactive and comprehensive process risk assessment approach based on JHA and RE. The mechanism of applying RE to address operation process risk is illustrated. The integrated approach can provide guidelines to establish proactive risk reduction measures as well as maintain a low-risk level. Finally, a gas transmission startup process risk assessment case is presented to demonstrate its applicability.     

夏季渭河西安段溶解性有机质(DOM)的特征、分布及来源分析

通过紫外吸收光谱,三维荧光光谱结合平行因子分析(EEMs-PARAFAC)方法及主成分分析(PCA),研究了夏季渭河西安段水体中的溶解性有机质(DOM)的组成、来源,及其与水质指标的相关性.在研究区域共检出2种类别5个不同的DOM组分,分别为类腐殖质荧光组分C1、C2、C3、C5和1个类蛋白类荧光组分C4,5个组分具有同源性.对比分析光谱斜率S、SUVA₂₅₄、α355和DOC浓度,上游(S1—S5)和下游(S13—S17)各组分分子量和腐殖化程度接近但来源有所差异,中游(S6—S12、S18—S19)分子量和腐殖化程度最低;研究区域DOM和CDOM浓度值变化基本保持一致.通过三维光谱参数和主成分分析进行DOM源解析,内源贡献率为72.36%,外源贡献率为12.45%,累计方差贡献率为84.81%;污废水排放是组分C1、C4的主要来源,C2、C3、C5则来源于城市景观水体和湿地公园中微生物和浮游动植物的活动产生,TN与外源具有较好的相关性而TP与内源相关性较高.水质指标DO、DOC、COD、TN、TP与DOM组分有较强的相关性.在此基础上建立了多元线性回归方程,一定程度上能够利用荧光组分组成和特征反映渭河夏季的水质状况.     

典型产业承接区土壤砷含量的空间分布特征及影响因素

本文以揭阳市为研究区域,采集了1330个表层土壤(0—20 cm)样品和331个深层土壤(150—200 cm)样品,利用富集因子法分析了表层土壤中As的污染状况,通过GIS空间分析技术以及单因素分析法探究了土壤As的空间分布特征以及影响因素.结果表明,研究区表层土壤As含量的均值为6.03 mg·kg^-1,低于该区土壤背景值(7.16 mg·kg^-1)及农用地土壤污染风险管控值(20 mg·kg^-1),大部分土壤为轻微污染和中度污染.揭阳市表层土壤As含量高值区分布于揭阳市东北部、中部和西南部地区,低值区分布于西北部和东南部地区.土壤类型、成土母质和土地利用类型是影响表层土壤As含量的重要因素,在不同土壤类型中,黄壤和赤红壤As含量相对较高;不同成土母质中,粉砂岩母质土壤As含量显著高于其他母质;在不同土地利用类型中,农用地土壤As含量最高.     

Toward harmonizing prospective effectiveness assessment for road safety: Comparing tools in standard test case simulations

Abstract

Objective: With the overall goal to harmonize prospective effectiveness assessment of active safety systems, the specific objective of this study is to identify and evaluate sources of variation in virtual precrash simulations and to suggest topics for harmonization resulting in increased comparability and thus trustworthiness of virtual simulation-based prospective effectiveness assessment.

Methods: A round-robin assessment of the effectiveness of advanced driver assistance systems was performed using an array of state-of-the-art virtual simulation tools on a set of standard test cases. The results were analyzed to examine reasons for deviations in order to identify and assess aspects that need to be harmonized and standardized. Deviations between results calculated by independent engineering teams using their own tools should be minimized if the research question is precisely formulated regarding input data, models, and postprocessing steps.

Results: Two groups of sources of variations were identified; one group (mostly related to the implementation of the system under test) can be eliminated by using a more accurately formulated research question, whereas the other group highlights further harmonization needs because it addresses specific differences in simulation tool setups. Time-to-collision calculations, vehicle dynamics, especially braking behavior, and hit-point position specification were found to be the main sources of variation.

Conclusions: The study identified variations that can arise from the use of different simulation setups in assessment of the effectiveness of active safety systems. The research presented is a first of its kind and provides significant input to the overall goal of harmonization by identifying specific items for standardization. Future activities aim at further specification of methods for prospective assessments of the effectiveness of active safety, which will enhance comparability and trustworthiness in this kind of studies and thus contribute to increased traffic safety.     

磺胺氯哒嗪在海水中的间接光降解

以有色溶解有机物(CDOM)作为主要光敏剂研究磺胺氯哒嗪(SCP)间接光降解行为和机理,分析CDOM组成、盐度和pH值对SCP间接光降解的影响.SCP间接光降解速率随CDOM浓度升高而逐渐加快.CDOM产生的光化学反应活性中间体对SCP间接光降解的贡献率不同,其中³CDOM^*起主要作用,对SCP间接光降解的贡献率高达77.94%.所用CDOM由4种荧光组分组成,包含3种外源腐殖质(C1,C2,C3)和1种内源腐殖质(C4), SCP间接光降解去除率和³CDOM^*浓度分别与荧光组分的相关性大小顺序均为C3>C2>C4>C1.其中C3和C2与[³CDOM^*]具有较高线性相关性(R²>0.97),是³CDOM^*的主要贡献者.盐度和pH值对SCP间接光降解的影响作用显著.在盐度为15‰时,SCP的间接光降解速率最大.在低盐度范围(0~15‰)内,离子强度效应对间接光降解的促进作用大于无机阴离子带来的抑制作用,使得间接光降解速率随着盐度的升高而加快.溶液pH=(5.00±0.10)时,SCP的间接光降解速率最大.SCP的间接光降解速率随着溶液pH值的升高而减慢,中性和碱性环境不利于SCP的间接光降解.